r/1401 • • 1d ago

Let's go gang!

Thumbnail gallery
6 Upvotes

r/1401 • • 3d ago

USB PROBLEMS AFTER COMPUTER GOES TO LOCKSCREEN

3 Upvotes

Hi!!! Why does my usb ports stopp working after my computer gors into lockscreen after me not being active in 10 minutes approximately? I have to reboot to make my usb keyboard work again. Anyway to prevent this? With kind regards Oliver from Sweden


r/1401 • • 3d ago

macOS 15 install freezes with 13 minutes left

2 Upvotes

when I boot from the usb stick and download macOS 15, it always freezes with just 13 minutes left, spamming cap lock doesnt work. DisableVariableWrite is already set to true! I have a amd cpu with a rtx 5080


r/1401 • • 7d ago

macOS 27 on Core i5 5th Gen with Intel HD5500

Thumbnail
gallery
38 Upvotes

So this was my headless laptop that was waiting for this moment to install macOS 27, I reserved this for experimentation the time nullmoth said about intel on macos 27.

I used liberator beta 2 and ask claude to do some way to install it.

So far it booted into the desktop, and i cant launch the apps from the dock, it only bounces when clicked and never launched.

No acceleration since it has HD5500, and by paper it could run upto monterey.

The UI felt like the time nullmoth posting his progress on his 2013 trashcan, where the same situation of unaccelerated and it boots from the desktop.

It has 128GB nvme and 4GB Ram, both tahoe and GG fitted on that 128GB.

Nonetheless, pretty impressive on its second beta version, saludos r/nullmoth

Sending logs for further development.


r/1401 • • 7d ago

macOS 27 on i7-4770 GTX 1650!

Post image
5 Upvotes

r/1401 • • 11d ago

Mac OS 27 Is Out!

25 Upvotes

Apple builds macOS 27 for Apple silicon only. Intel is done as far as they're concerned.

I didn't like that answer, so I built Liberator. Beta 1 is out today.

It's a Mac app with one main button. You run it on an OpenCore PC that already has macOS 15 or 26 with my N(V1DIA) driver working, press Prepare for Golden Gate, and it puts macOS 27.2 next to the macOS you already have. Your current install is not touched, and there's a button to undo it.

It will have problems. It has been tested on exactly one PC: an Intel desktop with an R(TX) 50-series card. Read the whole post before you try it.

WHAT THE BUTTON DOES

  1. Checks your PC and downloads macOS 27 straight from Apple (about 27 GB of downloads in total).
  2. Builds the Intel startup files macOS 27 needs on your hardware.
  3. Creates new volumes beside your current macOS and installs macOS 27 there.
  4. Installs the NullMoth N(VIDIA) driver for macOS 27.
  5. Adds the layer that runs Apple's arm64-only programs on an Intel processor.
  6. Makes macOS 27 the default in the boot picker.

If it stops part-way, press the button again. Finished steps are not repeated and the downloads are kept.

HOW IT WORKS: THE INTERPRETER

This is the part people will ask about, so here it is in plain terms. A lot of macOS 27 only exists as arm64 code. An Intel processor can't run that. There are three common ways around it. Translate ahead of time: convert each arm64 program into an Intel program once and save the result.

JIT: convert arm64 code into Intel code on the fly, while the program runs, and cache it in memory.

Interpret: don't convert anything. Read each arm64 instruction and carry out what it says, one after another.

Liberator uses an interpreter. Here's how the pieces fit.

The kernel and the drivers run natively. They are real Intel code running straight on your processor. The N(VIDIA) driver is native too, so graphics go through your card the normal way, not through an emulated one. Anything that already has an Intel half runs natively. Nothing sits in the way. Programs that are arm64-only get the interpreter as their Intel half. When macOS starts one of them, it starts the interpreter, and the interpreter runs the program's original arm64 code. On my machine that covers 367 system programs and 67 apps. Apple's files stay Apple's files. The interpreter runs the same arm64 code Apple shipped. It doesn't rewrite the programs. So it isn't the whole system running inside an emulator. The base runs at full speed on real hardware, and only the arm64-only parts go through the interpreter.

WHY AN INTERPRETER AND NOT A JIT

I built the JIT version first. I didn't keep it, for two reasons.

It was slower for this job. A lot of the system is small programs that start, do one thing and quit. A JIT pays to translate code before it can run it, and with programs like that the cost never pays itself back. In my testing the interpreter was faster.

I can keep an interpreter working long term. Apple changes macOS constantly. An interpreter just follows what each instruction means, so it's much simpler to keep correct across updates than a translator that generates Intel code. I want this to still work several updates from now, not only today.

It is not at native speed yet. Getting it there is the plan, and that's what the next releases keep pushing on.

WHAT YOU NEED

- A PC running macOS 15 or 26 through OpenCore, with the NullMoth NVIDIA driver working

- About 102 GB free on the macOS disk

- A wired network connection

- About 30 minutes, plus the download

- A backup, and the know-how to get back to your working macOS on your own

If "boot picker" means nothing to you, please wait for a later release. I don't want anyone wrecking their PC over a beta.

KNOWN PROBLEMS IN BETA 1

- No Wi-Fi and no Bluetooth

- Spotlight search doesn't work

- Books, Journal, Maps, Reminders and Voice Memos don't work yet

- The login window can say the System keychain can't be found. Press Cancel.

- The Dock and other glass surfaces can look flat and dark

- System Integrity Protection is lowered and Apple's code-signing enforcement is off on macOS 27. Treat it as a test system.

- Only one PC has been tested. Other boards, AMD processors and laptops are untried.

GOING BACK

Pick your macOS 15 or 26 disk in the OpenCore boot picker and open Liberator there. Cancel Golden Gate puts your old startup files back. Remove macOS 27 does that and also erases the macOS 27 volumes Liberator made. It asks first.

IF IT DOESN'T WORK ON YOUR PC

I can only fix what I can see. If macOS 27 doesn't boot, or something is broken:

  1. Boot back into macOS 15 or 26.
  2. Open Liberator and press Send a report. It reads the macOS 27 logs from there, so it works even if macOS 27 never reached the desktop.
  3. Post the report ID here or in the Discord, with your processor and graphics card.

"It doesn't work" with no report gives me nothing to look at. A report does. The goal for Beta 2 is support for a lot more hardware, and your reports are how that happens.

I'M LOOKING FOR DEVELOPERS

There's a lot left: more hardware, Wi-Fi, Bluetooth, the apps that don't work yet, and making the interpreter faster. If you write code and want to help finish this, say so in the comments or in the Discord.

LINKS

Download and release notes: https://github.com/nullmoth/nvidia-macos-driver/releases/tag/v3.0.0-beta.1

How to use it: https://nullmothsystems.com

Discord: https://discord.gg/VmDyD83WdC


r/1401 • • 11d ago

Some lagging on RTX 3060 (Mac OS 26)

3 Upvotes

Hello everyone !
Recently, i made a hackintosh using 1401, everything runs perfectly fine.
However, the is some lagging when loading system icons in system preferences, and stuttering in videos and other.
Also, my second display can, for some reason, only run at 30hz.
Are these problems normal, or are there patches to do that i am not aware of ?
Thanks for reading !


r/1401 • • 12d ago

Mac OS 27 on PC

Thumbnail
gallery
58 Upvotes

Version 2.9 of 1401 will fix most of the remaining setup and performance issues with Mac OS Sequoia and Tahoe.

Version 3 will be the release of Golden Gate.

It is going to be a bit buggy I’m sure as it’s a whole new system for arm OS’s

For updates please join our discord

https://discord.gg/V2QagQmg9

As always appreciate everyone!

Currently running 27.2 will be streaming the day before release!


r/1401 • • 15d ago

1402

1 Upvotes

Guys we need this


r/1401 • • 16d ago

Welcome Everyone

17 Upvotes

Looking forward to growing this with you all!


r/1401 • • 16d ago

👋 Welcome to r/1401 - Introduce Yourself and Read First!

13 Upvotes

Welcome to r/1401 — The NullMoth Systems Community

Hey everyone! I'm u/null-moth, founder of NullMoth Systems and one of the founding moderators here at r/1401.

Welcome to the community!

This subreddit is dedicated to 1401, NullMoth Systems, and pushing the boundaries of macOS on non-Apple hardware. Whether you're interested in NVIDIA graphics support on macOS, driver development, hardware compatibility, installation, or the technical work happening behind the project, this is the place to be.

Our goal is to build a community around the technology, share what we're working on, help each other solve problems, and make things possible that traditionally weren't.

What to Post

We want this to be an open space for developers, enthusiasts, and everyday users. Some things we'd love to see:

  • 1401 updates, questions, feedback, and troubleshooting.
  • NVIDIA drivers, macOS compatibility, and graphics development.
  • Hardware compatibility reports and successful builds.
  • Benchmarks, performance testing, and experiments.
  • Tutorials, guides, discoveries, and development projects.
  • Bug reports, feature requests, and suggestions.
  • Anything else related to NullMoth and the wider macOS-on-PC ecosystem.

Whether you've built a fully working system or you're just getting started, you're welcome here.

Community Guidelines

We're here because we enjoy building, experimenting, and figuring things out. Keep discussions constructive, respect other members, and don't be afraid to ask questions.

Technical criticism is welcome. Good documentation, reproducible bug reports, and sharing knowledge helps everyone.

Get Involved

  1. Introduce yourself in the comments. Tell us what hardware you're running and what brought you here.
  2. Share your build, ask a question, or contribute something interesting.
  3. Join our Discord to connect with the community, get help, and follow ongoing discussions: https://discord.gg/V2QagQmg9
  4. Follow the subreddit for project announcements, development updates, and community discoveries.

This is just the beginning. NullMoth has always been about pushing beyond conventional limitations, sharing knowledge, and making ambitious technical ideas accessible to everyone.

Thank you to everyone who's supported the project and helped us get here. We're looking forward to seeing what this community builds.

— NullMoth Systems


r/1401 • • 16d ago

Dual GPU Setup Question

5 Upvotes

Hey,

I have a dual GPU setup for macOS (Radeon RX 6600 as primary card (so I get native Sequoia graphics acceleration, the displays are connected to this card). A secondary card (RTX 5080) used for gaming on Windows.

Does anyone know if using nullmoth drivers I can use the RTX 5080 in Sequoia to run small LLM models locally?

Thanks