r/3Dprintmything • • Jan 11 '26 Bravo

A update to the Reddits auto mod has just been published.

22 Upvotes

Any posts that are made require the user to add a country to the start following the format below:

[US] (title)
[CANADA] (title)
[UK] (title)

etc.

Non-shortened versions of this work as well and US/CA can add sub locations by doing [US-NY] or [CA-BC].

Should you have issues with posting reach out to mod-mail.


r/3Dprintmything • • Jan 12 '26

New printer spreadsheet and review system.

11 Upvotes

To be added to the spreadsheet fill out the form below:

Printer Form

you will be assigned a Unique ID which you can find here along with all the other information you have entered:

Printers sheet

As a printer it is up to you to get the reviews done and supply the person with your unique ID.

Once you have a ID you can share this to the people you have printed for and ask them to fill out this form:

Review form

It is advised not to send this and ask clients to find their way to it via the side panel

Overall review scores are public, however individual reviews are kept in a separated document, printers can ask for reviews to be checked/verified via mod mail.

ratings are based off your overall score from all the prints reviewed via the form scoring as below:

13+ - excellent
10-12 - good
7-10 - ok
Below 7 - poor

This can be adjusted at any time, or more between levels can be added.

All links can be found on the right hand side information menu.

This system is new, may have a few wrinkles to iron out, they'll get fixed as we go with them.


r/3Dprintmything • • 3h ago

[Switzerland] Looking to print a couple mounts

3 Upvotes

This Mount only for brake pedal
this mount for wheel the tight tolerance one

as hard as material as possible but also the cheapest that would work


r/3Dprintmything • • 10h ago

SEEKING [USA-AL] IKEA Micke Desk Risers

Post image
5 Upvotes

Hello! I’m looking to print desk risers: 2 in the 100mm version and 2 in the 100mm clips version. I would like them to be in white. I’m not familiar with 3D printing materials, but I am going to say that these will be on carpet, so anything sturdy would be nice. Thank you!

Link


r/3Dprintmything • • 5h ago

SEEKING [US-Indiana] Can anyone 3D print me a replacement CMOS battery holder/compartment for Canon XL1 Camcorder?

Post image
1 Upvotes

The used XL1 i bought is missing the CMOS battery compartment holder so when I try to record to my external recorder all the files have the blinking “Missing CMOS battery” icon smack in the middle. Google says you can 3D print a replacement.

Yes, Ive tried stuffing it with letter board and pushing the battery against the contacts gently, didn’t work.

I don’t know the measurements or anything though seeing as how I’ve never owned this camcorder before

Thank you my friends!!


r/3Dprintmything • • 13h ago

SEEKING [UK] Doll stand STL printing x6

2 Upvotes

I know nothing about 3d printing but i already have a model purchased for some replacement doll stands! I believe they come in three parts, i would love to work with a person in the uk who would be willing to post via locker/pickup point.


r/3Dprintmything • • 19h ago

SEEKING [UK, London] Small (and very thin) resin parts

Post image
4 Upvotes

Not the best screenshot, but it was mostly angled in a way that would show what the piece is actually for.

Have attempted various attempts on an FDM printer and there's likely a few more things that would be attemptable, but figured if there was someone relatively local that would be willing to do it (and wasn't exorbitant), this would be easier.

I've got a bunch of these at different angles, and would be needing a few of each. The gap between the two "fins" on each side is only 0.3mm, and each fin is 0.4mm, so it's only a little over 1mm thick each (mostly, the base is a bit thicker). They're about 150mm long (which is why the picture wasn't great). FDM at that thickness has been tending to just turn into many strings (especially with the wider angles, like 170-180).

(I'm also open to design suggestions! The idea for these is to glue them to pieces of acetate to make a quasi-stained glass type mask)


r/3Dprintmything • • 23h ago

[London] Seeking 3D printer services.

4 Upvotes

UK: where do you get small functional prototypes printed fast and cheap?

I'm iterating on a small snap-fit joint, with parts about 10 to 50 mm. The services I've tried charge a £40 minimum and take about 10 days on the cheap tier. I need 8 to 24 small nylon or PETG parts every week or two, delivered to London in 2 to 3 days.

Is there a UK service, marketplace or local printer network you'd recommend? Or is buying an A1 mini the honest answer?


r/3Dprintmything • • 1d ago

PENDING [UK] Design + 3D Print – A4/A3 Wall Display (Dragon Age Quote)

Thumbnail
gallery
3 Upvotes

[UK]. I’m looking for help refining a design and producing a 3D printed wall/shelf display piece based on a quote from Dragon Age: Origins:

Dwarfish: "Atrast nal tunsha."

Translation: "May you always find your way in the dark."

I’ve attached several AI/concept images for reference as starting points. I’m new to 3D design and printing, so the specs below are flexible and open to your expert advice. I’d looking for a single maker who can do both the 3D modelling and printing, and who is good at communicating with clients during the project.

Project Specs (Open to Suggestions):

  • Target Size: Roughly A3 (420mm x 297mm), approx. 10mm thick
  • Material: Ideally resin for sharp detail (open to multi-part prints or high-detail filament advice given the size)
  • Finish & Colour: [e.g., Unpainted grey/black resin, or primed/painted]
  • Display: Needs to sit on a shelf or hang on a wall (e.g., flat base or rear keyhole slots). Printing in multiple pieces is fine if it fits together properly/cleanly.
  • Budget & Timeline: Flexible budget for quality work; no strict rush.

If this project goes well, I have several other pieces I’d love to commission in the future. Please comment below before messaging. Thanks for any interest.


r/3Dprintmything • • 1d ago

[US-CA] Looking to get a couple of cosplay props printed for an upcoming convention

4 Upvotes

Hey everyone,

so I am looking to get the following cosplay props printed for an Resident Evil Cosplay I have for conventions, if anyone can help me that would be amazing:

Links to 3D models:
https://makerworld.com/en/models/2981619-2k11-c3-handgun-prop
https://makerworld.com/en/models/1693652-taser-7-prop-weapon
https://makerworld.com/en/models/1891154-l2-retention-holster-taser-7


r/3Dprintmything • • 1d ago

CLOSED [US, NJ] Seeking Help with a project idea

Post image
2 Upvotes

I have 9 Trading cards I want to display and looking to do something like this(AI helped generare the image if that wasnt obvious). Doesn't have to be exact. just the jolly roger with potentially 9 slots I could slide cards into and then display on a desk or wall or something. Looking to see if someone wanted to take on this project and help me out. thanks in advance!


r/3Dprintmything • • 1d ago

PENDING [US-WI] Need this Action figure weapon designed and printed.

Thumbnail
gallery
2 Upvotes

Looking for this big rock axe looking weapon designed and printed. It doesnt have to be perfectly identical but certainly would prefer it as close as possible. General shape is what i really am after.

6.5 inches total length. Axe head roughly 2 by 2 inches.

Clear or clear green is preferred.

Let me know


r/3Dprintmything • • 2d ago

SEEKING [USA-TX] [W] 1x Acer Monitor H236HL VESA Adapter

3 Upvotes

Looking for someone to print one VESA adapter bracket so I can mount an Acer monitor H236HL onto a standard 100x100mm monitor arm.

* **Model Link:** https://www.printables.com/model/157495-acer-h236hl-vesa-mount
* **Material:** PETG, ABS, or ASA preferred for strength and heat resistance (avoid plain PLA if possible)

I honestly don’t know what I’m doing so I would appreciate any help


r/3Dprintmything • • 2d ago

SEEKING [USA-CA] Need steam machine stand printed

Thumbnail printables.com
3 Upvotes

Looking to get this steam machine stand printed in either PLA or PETG.


r/3Dprintmything • • 2d ago

PENDING [USA-GA] Looking to get a part printed

3 Upvotes

[SERVICE PENDING]

Looking to get this print and sent to GA 30022

Material: PLA
Color: BLACK

Source files:
Stl: https://github.com/jung1021/3dprint/blob/main/fit_check_frame.stl
350.52 × 139.69 × 33.12 mm

Please comment before sending a chat :)


r/3Dprintmything • • 2d ago

SEEKING [Germany] I designed a small Aqara E1 / G3 mount for IKEA SKÅDIS

Thumbnail
gallery
5 Upvotes

I wanted to mount my Agara camera directly to my IKEA SKÅDIS board without drilling holes or using additional hardware.
So I designed this simple adapter.
Features:
Compatible with Agara E1 & G3
Fits IKEA SKĂDIS
Tool-tree installation
Uses the original Agara ceiling mount
Clean cable routing
~13 g of PLA
Less than 1 hour print time
No supports needed
The whole idea was to keep it as small and simple as possible while still being sturdy enough for the camera.
I made the model available for free on MakerWorld if anyone has a similar setup.
Would love to hear what you think or if you have ideas for improving it!

https://makerworld.com/models/3408331?appSharePlatform=copy


r/3Dprintmything • • 2d ago

[UK] Looking for Rubbery/Soft Resin Printing

Thumbnail cults3d.com
3 Upvotes

Hi Everybody!

I'm a doll collector looking to enrich my hobby - there are multiple doll shoe STL files I'd like printed and perhaps to consistently print these over a period of time, so i'd like to establish a relationship with a 3D print artist to help bring these to life.

The original Bratz shoes are a firm rubber material, they attach to the leg with a peg that consistently is popped in and out, so whatever material is used needs to be firm enough to not lose its shape with that, but soft enough to not snap with the consistent stress either. I don't particularly know much about what would be best, so i'm of course open to suggestions.

I have attached a file that is what I am looking for, I would like multiple of these printed at once in sets of two with one flipped. Please let me know if this seems doable for you!


r/3Dprintmything • • 2d ago

SEEKING [UK] [London] I'm looking to 3d print a file I accidently bought off etsy

4 Upvotes

Hi there, I'm a 3d printing newb and want to give a gift to a player in my DND campaign.

I thought I was buying a figure but turns out it was the STL file. My fault lol. So now have an owl stl file and another with presupport file. I dont really understand what is needed for printing but I was told this community is the place to go.

I live in London around Canary wharf and am willing to pay for the expense.


r/3Dprintmything • • 3d ago

[UK] Looking to get a Brake Duct Printed - ASA-CF

Post image
5 Upvotes

Hi All, Looking to see if anyone can give me an indicative price for printing both of these in ASA-CF filament please.

Models are good and ready to print (Unsure on orientation though), I just don't have the ability to print in any stronger materials. Thank you.


r/3Dprintmything • • 2d ago

[CA-US] Offering 3D Printing Services with Fast Shipping and Reasonable Rates!!!

0 Upvotes

Hi! I offer fast shipping and reasonable rates on 3D printing. I use an Ankermake M5C for my jobs. Comment and DM for a free quote!


r/3Dprintmything • • 3d ago

RESOLVED [US, New Jersey] Looking to get a small M5StickS3 case

Thumbnail
gallery
9 Upvotes

Looking for someone to print a custom enclosure I've designed for an M5Stack M5StickS3 project. Preferably in an opaque red or similar reddish color. PETG preferred for durability, but open to PLA+.

Please reach out with pricing and available colors. Thanks!


r/3Dprintmything • • 3d ago

[UK, London]

4 Upvotes

Looking for someone to print, I need it to be 10” in height.

https://makerworld.com/en/models/3012049-pink-panther-funko-pop#profileId-3383048

I would like to be able to spray paint it and have a smooth finish


r/3Dprintmything • • 3d ago

SEEKING [USA - DMV] Printing E-TKT Label Maker Parts

5 Upvotes

r/3Dprintmything • • 3d ago

[USA] Free print files: modular, rotating filament carousel I designed and printed

Thumbnail
gallery
5 Upvotes

I designed and printed this modular carousel to organize my filament spools in the space between my printers. The racks stack, and the carousel rotates on a 12-inch turntable to make the spools around the back easier to reach.

I shared the print files and assembly details for free on MakerWorld:

https://makerworld.com/en/models/3629878-1-infinity-filament-carousel#profileId-4162154


r/3Dprintmything • • 3d ago

RESOLVED [Texas] Looking to 3D print my project

1 Upvotes

Hi! I have the CAD/STL files ready for a small robotics project, and I need someone local (or willing to ship) to print the parts and help with basic mechanical assembly. I tried printing it myself in PHA, but it keeps failing halfway through the print, so I’d prefer someone with a dialed-in printer to run it in PLA or PETG instead. I can provide all motors, servos, sensors and screws!