Sharing in case it saves someone two weeks of Wi-Fi troubleshooting.
Symptom
- Bose Smart Ultra Soundbar, AirPlay audio from an Apple TV and from an iPhone.
- Pause for about 30 seconds, resume, and the sound cuts every 1 to 2 seconds before slowly settling. The picture is fine, and only the soundbar audio drops.
- Started early November 2026, right after firmware 9.0.17. Still present on 9.0.18.
What did NOT fix it
- Two different routers (UniFi with U7 access points, and an Orange Livebox 7)
- 2.4 GHz vs 5 GHz, channel width 20/40/80 MHz, different channels
- DTIM, Fast Roaming, BSS Transition (802.11v), Proxy ARP, Multicast to Unicast, mDNS proxy settings
- WPA2-only vs WPA2/WPA3
- Factory reset
Tip: the pause/resume trigger reproduces it reliably (play, pause about 30 s, resume, listen). That makes testing much faster than waiting for random cuts.
What fixed it
Downgrading to 8.0.40 (the version before 9.0.17). Since then, every pause/resume test has been clean.
How I did it (at your own risk, since Bose doesn’t support downgrades):
- Found
product_update.zip for 8.0.40 on archive.org (third-party upload, not from Bose). Search there for “Bose smart soundbars and smart home speakers software and firmware”. The Smart Ultra folder is named SUSB. - Downloaded it without unzipping. It’s about 398 MB.
- Used Bose’s official “Direct IP” method: unplug the soundbar for 30 s, then shortly after it restarts open
http://<soundbar-ip>:17008/update.html, upload the zip, and wait until the light bar stops scrolling. - The same page then showed Product Version 8.0.40.50.
Stopping it from auto-updating back
- Blocking all Internet access works, but the Bose app stops working after a while.
- What works for me: block only
ota.cdn.bose.io (the firmware download server) with a domain-based firewall rule in my router. The app and cloud features keep working, and the router logs show the download attempts being blocked. - Don’t use the button-combo forced update while the block is on. Mine got stuck flashing until I unplugged it for 30 s. No harm done, it stayed on 8.0.40.
Caveats
- Downgrading means losing any fixes in newer firmware.
- Remove the block once Bose ships a version that fixes this.
I tried calling Bose support but gave up after 30 minutes on hold. If you have the same issue and manage to reach them, please report it, mentioning 9.0.17/9.0.18 and the pause/resume trigger, so it gets prioritized.