I'm doing my best to make sure this community does not get banned. I'm not perfect. I do my best to mod as often as I can.
I want to clarify the rules. Specifically on selling/wtb posts because I don't want any confusion.
You absolutely CAN NOT sell firearms, parts or accessories on this subreddit.
You can not link to a private sale. I.E. GAFS, Armslist ect.
You CAN post a link to a buinsess site. I.E.magpull.com, HB Industries ect.
I debated this one for awhile. I know it's rediculous that we would have to worry about being band from a link but hey, I'm just trying to make sure we stay open.
I bought a Scorpion 3 Plus Micro (SBR'd) last month and, like some of you, had a hellofa time getting that sumbishin' muzzle device removed so I could put my suppressor on it. In the process, I learned a few key details that might help the next guy, so I'm sharing them to add to the body of knowledge on that specific model.
How difficult these are to remove varies from "hit with your purse" to "Brother, get the flamer, the heavy flamer!"
What makes this challenging is that...
The muzzle device is recessed
The handguard is polymer, and could be damaged by direct heat and solvents
You can't remove the handguard without first removing the muzzle device and barrel nut
They don't publish what threadlocker they use, nor is it standardized
There is no specialized tool for safely removing the muzzle device, and using a tool of the wrong size or shape will gouge or deform it
It goes without sayin' (though I'm gonna say it anyway) that this is what worked for me, and it may or may not work for you!
Note:The links below are provided for reference only, in compliance with this subreddit's rules. I amNOTendorsing or selling anything!
About the Muzzle Device
I didn't know that the muzzle device isn't a proprietary CZ part; it's a KAK Industry Slimline Flash Can (SKU AR15-UP-260). It's made out of hard-anodized 6061 Aluminum. The slot clearance is 5mm, or about 13/64", though 3/16" is close enough (more on that later). According to the manufacturer, these are designed to "direct muzzle blast, flash, and gases directly forward, away from the user," meaning they don't affect muzzle rise or flash signature.
Factory Threadlocker
From what I've been able to gather, reports vary widely from Rocksett to [blue] Loctite, or some even claimed both! Because I didn't know what I was dealing with and there's no standard, Rocksett is highly temperature-resistant but water-soluble. Loctite comes off more easily with localized heat.
I started with the Rocksett approach and submerged the muzzle device in hot water for 2 hours - this had no effect.
Next, I tried applying local heat with a soldering iron set to 750° F, but it didn't transfer enough heat to break down the bond, though I've read posts where other people had success using this method.
I considered a chemical option, such as chlorinated brake cleaner (which works great on red Loctite), but that would have damaged the polymer handguards.
Ironically, they chose polymer instead of aluminum because it reduces heat transfer, and while they don't advertise the heat tolerances of the fiberglass-reinforced polymer they use, you probably don't want to subject it to direct heat exposure if you can avoid it.
Before going to work on mine, I removed the trigger group and bolt, then wrapped the handguard in a couple of layers of damp paper towels, then wrapped that in a couple of crinkled, loose layers of aluminum foil - a Scorpion Burrito, if you will... Scorpito? :)
Behold! A wild Scorpito!
Note:This step was probably unnecessary, but why take a risk? I'd just as soon err on the side of silly than have to buy a barrel nut tool and a new handguard...YMMV!
The Right Tool for the Job
As far as I'm aware, no one makes a dedicated removal tool for this muzzle device - CZ recommends using a flat metal bar or an armorer's wrench.
As I mentioned earlier, the slot size is just over 3/16". Someone mentioned using a hex shaft screwdriver but didn't specify a brand or model. I found a Husky 3/16 in. x 9 in. Square Shaft Standard Slotted Screwdriver worked for me. My local Home Depot had them for $10.
My armorer's wrench was too thick. Others suggested a SilencerCo Bravo & Charlie Spanner Tool, a pry bar, or a strap wrench. Any of these could work, but it depends on what kind of threadlocker they used and how liberally they applied it.
So long as it's no more than 5mm thick (~13/64"), squared off, and long enough to get proper leverage on it, you should be able to get it off without damaging it once you've broken down the threadlocker with heat.
What Worked for Me
I removed the trigger group and bolt, then wrapped the hand guard in damp paper towels, followed by aluminum foil, making sure the front face was shielded. I placed the weapon in the soft jaws of a portable workbench (I would have preferred a vice, but I used what I had) and clamped it down on the receiver until it was snug.
I aimed the butane torch directly down the muzzle device and focused the heat for about 60 seconds, then immediately shut it off, set it aside, inserted my square-slotted screwdriver into the slot, and applied counter-clockwise pressure until it moved.
I kept twisting with the screwdriver until it moved freely with little effort, then, wearing a welding glove, twisted the muzzle device off the rest of the way, set it on a scrap piece of aluminum foil, and let both cool for about 20 minutes.
Clean Up
Once everything cooled down, I got to work on the cleanup. I placed the muzzle device in a shallow dish and submerged the threads in acetone for about an hour, then used a nylon brush (the one in your cleaning kit works fine for this) and some dish soap to scrub off the threads.
If I had a barrel nut removal tool, I would have removed the barrel nut and taken the handguards off so I could get at the barrel directly, but I don't have one, so I worked around it...
You don't want acetone on the polymer, so I dabbed 91% isopropyl alcohol on a microfiber towel, used it to wipe off most of the threadlocker flakes, then blew it all out with compressed air.
Here's the result:
A clean, muzzle deviceless barrel, hold the melted handguard!
Finished Result
So after weeks of trial and error, I was finally able to complete my build:
SBR'd Scorpion 3 Plus Micro with a Strike Industries folding stock, Holosun AEMS Pro x2 (low mount to co-witness with irons), OEM 30-round magazine, and Banish 45 Suppressor.
Just as well, as it gave me time for my Form 1 to clear. I'm probably going to swap out the Banish 45 for a Banish TAC 9K TI, as it's roughly the same size as the muzzle device (though about 1" longer) and slightly lighter (.7oz).
Questions says it all, got my bonus at work and eying upgrading my 3+ with a nexus receiver, barrel, and bolt. Does anyone also know how often items pop up in the scratch and dent? I have all the parts to build a new bolt including the nexus upgrade kit so I want to buy the scratch and dent bolt that comes with just the primary bolt piece.
So i took my cz in to get the tri lug adapter put on and the guys was telling me that my suppressor might not clear the inside of the hand guard and if it does I might be super tight he even might have to take off some of the material my question is do they make a wider hand guard for the cz scorpion 3plus micro lmk thanks
So i took the cz out today and I had some issues with failure to feed i think that whats its called if I remember correctly I didn't have any issues with it last time the only that I've changed is the bolt from nexus that it what could be the issue lmk thanks
I half expect this thing to explode every time I shoot it. How normal is this wear? It’s probably got ~2000 rounds through it if I had to guess. Blazer is the only ammo I won’t run through it
So I had a weird issue where my gun started shooting really low. Before adjusting the sights, I did some research and found a random post explaining a problem where the thread protector under the flash suppressor comes loose, and causes this problem.
I tightened it but noticed it keeps coming loose after a couple hundred rounds.
So I've just removed the flash suppressor and threading protector. Works great now. But I'm curious if anyone else has had this problem? How did you solve it? Is there a problem if I leave them off?
Does anyone know if the ILWT 5.3in barrel is designed to fit the newer HB industries SR Handguards? I ordered the handguard for a 3+ because thats what I have but when got it in and took the factory handguard off I realized I didnt have the trunnion barrel nut. I am assuming it is because the carbine version of the 3+ uses a different barrel nut. Trying to SBR this thing but right now im sitting on an expensive paper weight waiting for a call back from HB Industries.
I keep seeing folks mention Cz has the stocks for $400+ which is not true Cz parts looks to be a scalper. The real site is shop.cz-USA.com. You can get there from the Cz USA main page. I ordered my fde one a month ago for 119. Quit buying the same stock for 4x the price and supporting scalping.
Hi y’all. New to the CZ Scorpion crew. I was thinking of getting an Obsidian 9 suppressor to use for both my raider and my Scorpion. It has a 7.7inch barrel with the flash can and the carbine handguard and was wondering if you guys direct thread it or use the tri-lug muzzle device. Thanks!
So I just bought a yhm r9 suppressor for my cz scorpion 3plus micro and im looking to get a 3 lug adapter for it but I cant find one any where do you guys have a line on one the one I seen was 235 which isn't to bad picture 1 is what id like to run and pictures 2 they have them everywhere so what is really the difference between them lmk thanks
I bought the full nexus upper kit and bolt with the 125% recoil spring, but after installation, my gun seems to be snappier. Like more felt recoil than before… I’m so confused by it.
I’m wondering if maybe I mixed up the new and old springs and could have put the old spring back in during installation. Has anyone felt anything like this. Could the mixup with the spring be the culprit?