r/Cartalk • • Mar 31 '26

Mod Post Report all app developers

190 Upvotes

We've been banning around five people a week for advertising their AI vibe coded apps that put a OBD2 code in and spits out generic or dangerously misleading results. Many claim to be free or claim they just want help testing them. Many are based out of countries you probably don't want your personal information getting sent to, like VIN numbers, etc. REPORT THESE POSTS FOR BREAKING SUBREDDIT RULES and the report them again as SPAM so Reddit Admins are notified.


r/Cartalk • • 13h ago Bravo

I need help fixing something CAR MOLD SOS!!!!!!!!!!!!!

Thumbnail
gallery
167 Upvotes

i have a 2014 Nissan Altima, that was showing signs of a leak, we thought it was the sunroof but got the drains cleaned out. Either way there was a lot of standing water under the carpet. Got it parked in the garage, vacuumed with a wet vac and left it with DampRid bags, and once we got a detailer out, the car was FULL of white fuzzy mold. Spent $700 he did a deep detail and a 30 minute ozone treatment. Just went out there a week later.....and its back!!!

Want to get it safe and cleaned so i can sell it, Does anybody have any ideas?


r/Cartalk • • 9h ago

My Classic Car We Need Our Little Bakkies Back! 🚘

Post image
26 Upvotes

I genuinely believe we need to bring back the small bakkie. Not everyone needs a massive Ranger, Hilux or Amarok. Some of us just want a little bakkie that can carry tools, furniture, building materials, groceries or whatever life throws at us, without costing a fortune to buy, fuel or maintain.

The Ford Bantam, Opel Corsa Utility and Chevrolet Utility weren't just work vehicles; they were genuinely practical everyday cars. They were affordable, versatile, easy to park and made sense for ordinary people. Somewhere along the way, bakkies became bigger, more expensive and increasingly focused on being oversized rather than accessible.

I really hope the upcoming Volkswagen Tukan and Ford's affordable bakkie, expected around 2027, bring back that spirit. Please don't make them unnecessarily big. Give us something closer to the Bantam in size, with modern safety technology, reliability and an affordable price tag.

I also think there's a market for these little bakkies. I remember someone saying they loved their little bakkie, unfortunately wrote it off in an accident, and wanted to replace it with a brand-new one. But by then, the half-ton bakkies had disappeared. They weren't interested in buying an old second-hand vehicle, and there simply wasn't a new alternative available anymore.

That's exactly the problem. People still want these vehicles, but manufacturers have largely abandoned the segment.

Who's with me? Would you buy a brand-new half-ton bakkie if manufacturers brought them back?

Let's show Volkswagen, Ford and the other manufacturers that there's still a market for small, practical and affordable bakkies in South Africa!


r/Cartalk • • 24m ago

I need help fixing something My wipers don’t work

Thumbnail
gallery
4 Upvotes

Weeks ago I tried turning on my wipers but they didn’t work. A week or two after that I added fluid because I knew the reservoir was empty. The pump was working but I just heard a lot of fluid leaking but I didn’t know where it was coming from. Last week I saw what y’all are seeing in the photos. I think some squirrels chewed throught the wires because I see lots of nuts in the engine bay. That IS the wiper motor isn’t it? Would I be able to splice the wires??


r/Cartalk • • 37m ago

Suspension Removing a rounded sway bar link nut in a driveway

1 Upvotes

The inner hex on the stud rounded out before the nut broke loose, and I don't have clearance for a grinder. Is there a reliable way to lock the stud from behind, or am I stuck using a loose hacksaw blade?


r/Cartalk • • 1h ago

Weird Noise Automotive workers & DIYers: what’s your take on driving video games? (Automotive workers, mechanics, engineers, or DIY car enthusiasts)

1 Upvotes

Hi everyone,

I’m Auriane, a Master’s student in Organizational Communication at IAE de Poitiers (France). For my thesis, I’m researching the relationship between working in the automotive industry (or being a hands-on mechanic) and digital culture, specifically driving video games, sim-racing, and car forums.
To get real-world insights from people in the field, I’ve put together a short, anonymous survey (takes about 5 minutes). I’m looking for responses from anyone in the technical chain: mechanics, diagnostic techs, apprentices, engineers, drivers, as well as weekend DIYers or cars fans.
Whether you’re a dedicated sim-racer or have never touched a video game in your life, your perspective is equally valuable to avoid bias in the study.
Link to the survey: https://framaforms.org/automotive-video-games-and-professional-identity-the-gaming-practices-of-automotive-industry-workersĀ 
All responses are strictly anonymous and used solely for academic research (only my thesis supervisor and I have access to the data). If anyone is open to a quick 30-minute chat to go a bit deeper into the topic, you can also leave a contact at the very end of the form.

Thanks a lot for your time and help!


r/Cartalk • • 21h ago

Safety Question Has anyone else slowly lost interest in cars as they've gotten older?

31 Upvotes

I used to dream about owning something special, but now everything feels so expensive that it seems almost impossible without sacrificing financial stability. Just wondering if anyone has found a way to enjoy cars without going broke.


r/Cartalk • • 3h ago

Transmission 2014 Ford Focus automatic. 91,200 miles. Code P287A.

1 Upvotes

Hello mechanics, please help. I bought this 14 focus cash because it had documented proof of transmission rebuild 25k miles ago. Ran good on test drive. After purchase on the way home it started skipping gears and went i stopped and turned it off wouldn’t crank cause it couldn’t tell it was in reverse. Check engine line come on P287A. I took it to transmission shop and they put Dorman TCM. They test drove it and said it was fine. Nope, after 20 minutes of driving time the same thing happened. Check engine light back but have not checked it at O’Reily’s yet. Been dealing with this over a week and can’t use the vehicle for work as intended. Anything I can do to fix it myself? Not sure if they did a reprogram or relearn. Not sure if it’s the clutch b itself or not. Thanks everyone!


r/Cartalk • • 12h ago

I need help fixing something Wiper blade is loose at the bottom

Thumbnail
gallery
4 Upvotes

I just bought these and the when it wipes it leaves a streak at the middle and when I looked the bottom side does not align with the connector like the top- I’m not sure how to fix it at all I see no guides on how to make the blade attach to both sides so that it doesn’t shake at the bottom when wiping - any idea on how to fix this or am I cooked!ā€?


r/Cartalk • • 7h ago

I need help fixing something 2021 Kia Sorento MQ4 Diesel AWD (Korean Spec) – Water intrusion inside the AWD ECU! Where is it coming from?

1 Upvotes

​Hey everyone,

​I’m currently diagnosing a 2021 Kia Sorento (MQ4) 2.2L Diesel AWD (Korean domestic market / KDM import) and ran into a strange issue.

​I found severe water intrusion and corrosion inside the AWD Control Module (located behind the rear-left luggage side trim, near the rear shock tower and next to the power liftgate/trunk module).

​What makes this puzzling is that the surrounding trunk area and interior trim feel completely dry, with no obvious water stains on the headliner or carpet.

​Has anyone experienced this on the MQ4 Sorento or Santa Fe? Where could the water be entering from?

​Could it be leaking through the roof rack mounting points, rear quarter glass seal, or liftgate wiring grommet?

​Or is water traveling/wicking up through the wiring harness from underneath the vehicle?

​Any insight or known TSBs/common leak points for this area would be greatly appreciated! Thanks in advance.


r/Cartalk • • 8h ago

I need help fixing something Car body paint

Post image
0 Upvotes

So i was compounding and polishing(first time) my car with an angle grinder and I think I might have gone through the clear coat. So can anybody tell if this can be fixed at home by me, if so, then how. Or should I take it to a painter. Also will the painter do the the whole panel or just this area. Ty


r/Cartalk • • 9h ago

Suspension Do Chinese aftermarket BMW "VDC/EDC" struts actually have working variable damping valves, or are they just passive dampers with a resistor bypass?

0 Upvotes

​Real variable valve vs. resistor trick: Do any of these Chinese BMW G32/G11 air struts actually replicate ZF’s continuously variable proportional solenoid valve (so Comfort vs. Sport mode genuinely changes valving), or do they just use a fixed passive shock with an internal resistor to prevent chassis/VDC fault codes?? ​Has anyone mixed one Chinese "VDC" strut with a factory ZF VDC strut on the opposite side of the same axle? If the Chinese one is actually passive, I'm assuming it would cause uneven rebound/compression side-to-side


r/Cartalk • • 16h ago

Stock audio Kenwood wont let me download updates

Post image
3 Upvotes

hi all, need a firmware update for a DPX504BT and for some reason cant download from the website and i get this message when i click download, any insight would be great


r/Cartalk • • 18h ago

DIY body damage help Full Replacement or repair?

Post image
3 Upvotes

Idk how this happened but it doesnt go all the way through its only the outside layer of the glass like its completely smooth on the inside of the car


r/Cartalk • • 21h ago

I need help fixing something Should my cv axle have this much play at the transmission? My van is intermittently shaking at high speeds while accelerating. Tia

5 Upvotes

r/Cartalk • • 14h ago

Tire question "Stuck" Tire?

0 Upvotes

I was having my current tires (with good tread) swapped out for my winter tires and this happened. I was told the tech said the tire was "stuck" and he had a very hard time getting it off. The dealer is refusing any compensation. All I'm asking is $40-50 as a pro-rated amount for a used tire. Is this a tire issue or a tech issue?


r/Cartalk • • 18h ago

Body Looked at a car the other day, anyone know what this paint damage might be. They were unsure

Thumbnail
gallery
2 Upvotes

Closeup


r/Cartalk • • 14h ago

Body Rust on sub frame

Post image
0 Upvotes

I got this car for free and it runs great but im in quebec and during winter they put salt on the road so my bottom part are rusted is this to much for it to be safe


r/Cartalk • • 18h ago

Safety Question Extending range for a long trip

2 Upvotes

So I have an old Suzuki Alto from 1983, it's fuel tank holds a whopping 27 liters (about 7 gallons) of fuel from factory, however due to an incident the tank is pushed inwards and now holds about 23 (6 gallons or so). Soon i'm going to be taking this car on a 2400km (1500miles) roadtrip. To avoid needing to stop every 3 hours for fuel i was wondering if it would be a good idea to get boat tank and put it in the trunk with a line and pump hooked up to the main tank? The current fuel filler neck has a hose running to the top of it for venting from the main tank, i was thinking of hooking the boat tank into that line with a 3 way connector. That way I can flick on the fuel pump, run the gas from the boat tank into the main fuel tank and still use that line for it's intended purpose for both the main tank and the auxiliary tank. (Venting the fumes).

Would this be a good idea?


r/Cartalk • • 11h ago

My Classic Car Audi vs Mercedes 2027 models

0 Upvotes

hello all, I am not sure if I’m going to get different answers purely based on preferences but I’m about to get my first car. and I can’t decide between Audi q5 and Mercedes GLC. I live in a very cold state. I’m single and I will be driving on the highway. i will proabbly use the car 5 hours a week if that matters. I’m not sure what is my priority when it comes to cars…but I guess I would want something that feels ā€œniceā€ lol not sure if that helps

I would appreciate any insight or recommendation. thank you in advance!!


r/Cartalk • • 18h ago

General Tech Is there any rearview mount dash cams that don’t rely on a backup cam?

2 Upvotes

I drive an older car, and when I first saw that they made dashcams that double as a rearview mirror I thought they sounded perfect. Upgrading the width and the auto dimmer of my rearview, while also adding a dashcam. After doing some research, it seems like all of these dashcams want you to use the backup cam instead of your rearview. I think this is kinda stupid because I already intend on adding a backup cam and a new radio, so really I’d just be sacrificing another form of visibility in my car if I added one of these. Would it be better to just add a dashcam that is solely a dashcam? Or do they actually make rearview dashcams that are also just standalone mirrors?


r/Cartalk • • 21h ago

Tire question Is my rim warped?

Thumbnail
gallery
3 Upvotes

Recently got new tires. Had them balanced twice because I felt vibration in the front end. Noticed today that there was some rim damage and that I could see more of the tread when looking straight on. What do you think? 2020 Lexus ES350 Base.


r/Cartalk • • 15h ago

Tuning my car Upgrades

0 Upvotes

I recently bought my first car, a 2017 KIA cerato sedan sport, and haven't had any experience upgrading or servicing it myself. What are some upgrades that a begginner could do easily and for cheap?


r/Cartalk • • 16h ago

My Classic Car Would you trust the Jaecoo J7 for a 5-year ownership journey?

1 Upvotes

The Jaecoo J7 has an interesting design, but I'm more curious about how it will hold up after years of daily use.

Looks and features are one thing, but reliability, maintenance and parts availability are what really matter.

What would make you trust a newer car brand like Jaecoo for the long run?