r/consolerepair • • 19h ago

PS5 deep cleaning

Post image
163 Upvotes

Is this a reasonable price? PS5 sounds like a jet engine when playing GTA6

Edit: I’m in north Florida


r/consolerepair • • 13h ago

PS5 Screen pixelated

28 Upvotes

During some games(not all) there are black/ white pixels run down the screen. Anyone seen this and know of a fix? Gone through new HDMI cord/port and tried to put the console in safe mode and output of 1080p.


r/consolerepair • • 6h ago

Is this ps5 mother board fixable be honest?

Post image
4 Upvotes

If not can I at least rescue the account on it?


r/consolerepair • • 7h ago

[Gameboy] Pokemon Blue Trace Repair Question.

Thumbnail
gallery
5 Upvotes

Nabbed the broken Pokemon blue for a good price. Diagnosed and found the bad Trace/ Vias that were causing the issues. Tested and works and saves perfectly now!

Issue is that I only have these bulky wires in stock at the moment. I don’t trust them to just stay on like that. I’ve done budge wire fixes on larger 8 bit systems but they don’t go through the bumps and shakes that a cartridge does.

Is there a better way to do trace work for gameboy carts? I have seen people glue wires down in videos before. Whatever yall normally do let me know!


r/consolerepair • • 7m ago

Ps5 HDMI port repair , artefacts at higher resolution

Thumbnail
gallery
1 Upvotes

Sorry for terrible picture, I’m expecting a few hand on shoulder comments here but oh well 😂 The picture artefacts at anything higher than 1080p , at 1440p green dots on screen.

Ps5 digital after hdmi repair , console was showing no signal before. Missing little capacitor right above the port pins. I’m wondering if this has anything to do with it? It wasn’t there when opened as the console had been “repaired” before and I assume either never put back or knocked off last failure

I screenshot the console while it was showing artefacts and the screenshot was perfectly clear , i read that a failing gpu/apu would show artefacts in the screenshot.

At 1080p there’s next to no artefacts until i launch a game , I’ll occasionally see a sparkle if you will every now and then. In 1440p it looks like green rain.

I’ve already ordered the capacitor i am just wondering if anyone has had this. ?

Thanks


r/consolerepair • • 19m ago

[PS4 PRO] CUH-7116B PSU seating problem and starting

1 Upvotes

I was having problems with the power supply, its not seating correctly and it bulges on the mid-front, I've checked everything and nothing. After complete reassembly it refuses to power on.Check the video


r/consolerepair • • 9h ago

(PS5) do i need to get a new fan

Thumbnail
gallery
4 Upvotes

tried to take the fan out and messed up the wires a bit is it over or is it fixable


r/consolerepair • • 7h ago

Ps5 HDMI Port

Post image
3 Upvotes

Is this fixable if I bent the brackets back?


r/consolerepair • • 1h ago

Original PlayStation PS1 distorted graphics on initial game boot. Works perfectly if I hit Reset after.

Post image
1 Upvotes

This PS1 wasn’t reading discs so I replaced the capacitors at C705 and surrounding. Now on initial start up, it boots to a distorted PlayStation logo like the picture and stalls. BUT if I hit Reset, it plays the game perfectly. Do I just continue recapping this board? Anyone ever experience anything like this?


r/consolerepair • • 2h ago

[PS4 Pro] -Technician accidentally ripped off the connector to MB and Power supply when I gave it to clean

1 Upvotes

Saturday morning I went to a shop who does mobile and laptop repairs for cleaning out my recently acquired PS4 pro JB. Shop and technician are good but slightly pricier compared to other local repair shops and their service have been good for mobile and laptop. Also confirmed with the technician if he can do the cleaning for PS4 pro before going there.

Anyhow,, went immediately when the shop opened so that I can sit with him and see how things were going, and probably get done with it in 45-60mts. Things were going okay till he ripped off the connector accidentally while pulling off the MB. In his defence, the connector was damn tight and couldn't come out even with the wriggle technique.

2 of the connector pins had come off and 2 remain on the MB. I searched for this issue and I came across many others also facing the same. I'm not technically sound, so some terms might not be right. He didn't have any spare connectors and as a workaround used spliced wires from a usb cable and soldered it to the MB. It took quite longer than expected, but alas, after all this, PS4 just beeped once with blue light and then it didn't turn on.

Gemini said the 5VSB wire might have been misplaced or something. Opened it up again and looks like one of the soldered wire had come off immediately. Tried fixing it back up, but the same status l.

2 things worth pointing out - He didn't have any heat shrink tubes and used insulation tape instead for the spliced wire fixed to the og wire. 2nd thing, he used a masking tape (paper type) on the soldered point, instead of any epoxy or mask which was supposed to be used according to Gemini.

He said this issue will get fixed the next day and now I'm sitting at the shop, waiting for the console to be delivered here from his brother's shop. He had given to that shop as they had the same model available and they could compare and fix it.

Now, I'm just anxious about what all happened and wondering if this thing would have any long lasting impact. Especially for any future cleaning process. Also, I hope the JB is not messed up somehow (idk how unless they decide to update the FW).

Also, I just got to know about thermal pads this morning, but I don't really feel like asking them to replace it at this point of time after all what happened.

I would ensure to test if it turns on, and also if it goes to rest mode and comes back up again properly, since that wires are for providing power while in rest mode. Is there anything else that I should be checking?

PS, For next time, I'm considering to buy the pin type screwdriver for opening up the parts myself at home. And maybe get a thermal pad and attempt to replace the thermal pads myself.

Please do lmk if there's anything else that I've missed or I should consider. And maybe console (pun intended) me by saying things are gonna be okay.

Edit: Location Bangalore, India


r/consolerepair • • 6h ago

[PS5] My Launch PS5 is getting green screen + loud screech, then shuts off in any game (menus work fine)

1 Upvotes

My launch PS5 (CFI-1014A, I’m pretty sure I bought it in 2020) started crashing in games. I'd played \~24 hours of GTA 6 with no issues, then mid-game the screen went solid green, the TV made a loud screeching noise, and about 20 seconds later the console turned itself off.

Now Every time I get into a game I get the green screen + screech and it shuts off. It's getting worse too, first \~3 minutes in, now about 1 second after gameplay starts. I tested another game and it’s the same thing in Demon's Souls, so it's not just GTA 6

Home screen, menus and Safe Mode work fine (stayed on 5+ min without crashing)

I think the light was blue during the green screen

Before this, I sometimes noticed subtle afterimages on moving characters (not sure if related)

What I've tried / ruled out:

  • Moved it from a power strip to a wall outlet
  • Safe Mode: cleared cache and rebuilt the database
  • Tested a second game (Demon's Souls), same crash
  • Doesn't seem to be overheating: the console is only slightly warm and the fan never gets loud. It spins and pushes air out the back (maybe sounds a bit funny/choppy)

Why did it have to happen now 😭

Anyway, what do you think is the recommended course of action here?


r/consolerepair • • 6h ago

Need advice for ps5.

Post image
1 Upvotes

Hello! Me and my brother just picked up this used ps5 fat. We got a good deal because the hdmi port is a little damaged but it still works fine. I am concerned with how it will hold up in the future. I was wondering if it would be possible to take apart the ps5 and slide the two metal leafs back together and squeeze them back together with pliers. I am also worried that doing that might result in more damage and might not be worth it. What do y’all think? Should I try to fix it, or just leave it alone?


r/consolerepair • • 6h ago

Flux cleaning

Post image
0 Upvotes

How do I efficiently clean off flux . Sometimes it look like burned chocolate on the motherboard . Also when I’m adding solder to the pads for prep. I used flux heat gun .. add a little solder to the top of the iron and i gently slide across the pads.


r/consolerepair • • 1d ago

[3DS] Charging Port Soldering

Post image
37 Upvotes

I know its one of the easiest repair but i wanna show this


r/consolerepair • • 7h ago

[XBOX ONE] OSU fail on verifying please help

1 Upvotes

Drive was dead in this Xbox One 1540 fat console so had to replace it for a working one 500GB. Have the latest OSU1 downloaded, passes the downloading part but turns off at 1% verifying. Shoots error E101 90060007 8B05000F Anyone come across this that could assist on what to focus on?

Have tried:
-Redownloading OSU1
-Reformatting USB drive and making OSU thumb drive numerous time even with other drives
-Tried other USB ports on console
-Tried connecting new 500GB HDD to PC, wiping it, cleaning it, formatting it to NTFS and even using the Xboxonehddmaster script to set it up with partitions even though I did notice that XBOX sets partitions it self
-Have tried booting to Troubleshooter with 2 start up beeps and even third which forces instant OSU update.

Really appreciate any help Thanks


r/consolerepair • • 8h ago

[PS4] JDM-055 S2PG001A bypass (ME6118A + TP4056 2k PROG).

Thumbnail
gallery
0 Upvotes

Bypass for a PS4 DualShock V2 (JDM-055) after removing a faulty S2PG001A IC: the ME6118A (~3.3V) restores the system power rails (3.2V and VCORE+) so the controller powers on and connects normally. A TP4056 with a 2 kΩ PROG resistor handles controlled battery charging, while the U2 pads remain clean. On the pads of the removed S2PG001A chip, pads 39 and 41 are bridged with a separate thin insulated jumper wire. Pins 54, 55, 56, and 57 also need separate jumper wires connected to the blue points on the TP4056 for everything to work properly. The lightbar LED and PS button won't light up (though they will still function) because the S2PG001A was removed, and the PS4 controller will connect to the console provided the MCU chip is still good. My PS4 controller works with the console, and through further electronics forensics I might manage to get at least one LED to turn on and off with the controller's power state. In the third photo, I marked SMD capacitors as 10 µF and 2 µF—the labels should be swapped: the spot marked 10 µF takes a standard 2.2 µF capacitor, and the spot marked 2 µF should be read as 10 µF. Pin 5 of the TP4056 sits directly on the B+ rail and is marked with an orange dot, and its trace also leads to the yellow dot on the SMD capacitor near the TP4056, which connects directly to the Vin pin on the ME6118A regulator. That means when the 4.25 V battery voltage passes via a jumper wire through the orange and yellow dots to the Vin pin (far left in the image) on the ME6118A, it is stepped down to 3.3 V at VOut (the middle pin). The third pin on the right in the image—the GND pin of that ME chip—is connected to the GND of an SMD capacitor whose other pad receives 5.x V from the Micro-USB charging port or the PS4 console via cable. The TP4056 and ME6118A regulators are anchored with solder: the first via a 2 kΩ SMD resistor (0805 on my board) to the top pad of the SMD capacitor and its GND, and the second (the ME) via its GND pin to the GND of the power capacitor from the USB connector.


r/consolerepair • • 9h ago

Xbox 360 controller kinda not working

1 Upvotes

I decided to open one of my old boxes and found my old xbox 360 that hasnt been active/played with for at least 5 years.

One of the controllers even after a battery change doesn't react or even turn on BUT if i plug it into my pc using the charging cable it shows signs of life.

Could anyone help me figure out how can i use it again wirelessly? (No corrosion was found on them so idk why they dont work)


r/consolerepair • • 10h ago

[PS4 slim] Cleaned my PS4 slim disc drive and it worked for one disc then it stopped again?

0 Upvotes

Basically the title. I spent this afternoon taking apart my PS4 slim, cleaned the rollers for the disc drive, put it back together, then it accepted a disc. I took it out and put another one in and it didn’t accept that one. Since cleaning it apparently wasn’t the problem, what else could be wrong with it?


r/consolerepair • • 11h ago

Xbox series x HDMI repair help

1 Upvotes

Hey guys so I bought an Xbox series x off of Facebook marketplace for $450 well got it home and the HDMI pins inside that contact the HDMI cord are broke. I live in West Virginia and my local place CPR wants to charge $200 plus tax to fix it.

I tore it down to just the board so it'll be easier on whoever can fix it. I don't mind shipping it out, I just don't really wanna pay $200+ to have it fixed. Does anyone here know any reputable places that can get this thing fixed quickly?


r/consolerepair • • 11h ago

[ Nintendo Switch Oled ] A line appears on the left side when the console is turned on.

1 Upvotes

I've had my Nintendo Switch OLED for 5 days now, it's brand new, and just yesterday I noticed that when I turn it on, after the Nintendo logo appears, a line appears on the left side.This only lasts for a moment and then disappears. Otherwise, the console works normally and this issue doesn't occur in video games or anything like that. I've seen that this has happened to some users even though the console is new. Do you know if this will affect future use? Is this a manufacturing defect? Or would it be better to use my warranty and return the console? Any feedback would be greatly appreciated.


r/consolerepair • • 1d ago

[PS5] is this GPU/APU ruined?

20 Upvotes

It was my stepdad’s but he have it to me so i could play gta6. The thing has crazy bad gpu artifacting and wont boot. I got it inot the menu for a little but it just got worse after i turned it off and back on. Is it worth just selling or sending it to sont for replacement or bringing it to a repair shop?


r/consolerepair • • 13h ago

Xbox series x PSU??

1 Upvotes

I need to buy a new psu for my Xbox series x and cannot find any online. I have the 1920 model. There are a couple from some sketchy sellers and they won’t arrive until late December. Where can I find one that would be trustworthy? Aftermarket is fine. I’d rather have a new aftermarket than a used OEM. Please help me out


r/consolerepair • • 13h ago

[PS5] liquid metal repair

Post image
1 Upvotes

I was wondering if I’m able to extract the little bit of liquid metal on the right side and just add that to the spot that needs to be fixed or should I start from scratch clean it and add new Liquid Metal?


r/consolerepair • • 13h ago

Ps4 diagnosis

1 Upvotes

I got a ps4 from a friend in 2020 and it had wierd issues he said it would turn on and off I thought it was simply overheating around last year I would play it no issues unless something touched the top of the console it would just turn off fast forward to now I disassembled it completely cleaned everything out did a re paste and it worked great for a little bit there was wierd issues though when doing random things basically starting any program or even turning on a controller wireless it is artifacting and shutting off sometimes the console shuts down completely and most times it artifacts then my screen goes black controller won't pair but the white light is still on and it produces heat also testing it again same issue as last time whenever I touch the top right side of the console it artifacts and shorts I didn't see anything strange on the inside psu seemed fine enough when it would work even like 2 days ago I could install whole games and even played bloodborn and kingdom hearts for about 8 hours any thoughts???