r/Fireplaces • • Nov 06 '22

If you’re posting a question about your fireplace, please include pictures and/or model numbers.

26 Upvotes

Pictures are very helpful for users to give accurate advice and information. Fireplace specifics aren’t common knowledge to most people and it’s very typical for people to use incorrect terminology regarding what they have. If you don’t know the difference between gas logs, a gas insert, and a gas fireplace, you really should post a picture to make sure you’re given good advice about what you can do with your fireplace.


r/Fireplaces • • 10h ago

Need help figuring out what I’m looking at

Thumbnail
gallery
3 Upvotes

hi all! hoping to get some help figuring out my fireplace. it’s a wood burning fireplace with a gas start. we are wanting to switch it to a direct vent, but want to have a general idea of what we’re looking at.

my main issue is that the direct vent fireplaces i’m seeing online are pretty large, and our fireplace is small in comparison. wondering if we could remove the ceramic brick pieces to get more room? to save money, we’re looking at fb marketplace for a used one.

additionally we’re trying to figure out what type of vent we have. we do have a chimney/flue, but the vent outside (last photo) and the area underneath the ceramic part of the fireplace (pictures 3 and 4) have me wondering if it’s set up as a direct vent already. our house was built in 2006 if this helps at all.

additionally, i have looked everywhere i can see for some sort of tag, brand, serial number, etc. but am unable to find anything. thank you in advance!


r/Fireplaces • • 5h ago

Heatilator / Majestic Doors?

Thumbnail
gallery
1 Upvotes

Hi Reddit Fam,

I have a Heatilator A36C without any glass doors. I’ve been trying to find some doors without paying an arm and a leg. Heatilator part number is DM1736 for the doors I need but specifically state it’s for the A36C. This other company sells DM1736 but specify that’s it’s only for Majestic S36C fireplaces. I know both are the same company, but wanted to see if anyone has no gut majestic parts for their Heatilator and vice versa. A lot of their part numbers are the same #, but I’d hate to buy some and pay a 15% restock fee if the mounting hardware is different for whatever reason. The manuals are almost word for word. Thanks for any input!


r/Fireplaces • • 7h ago

Questions about running pipe through back of existing fireplace

Thumbnail reddit.com
1 Upvotes

r/Fireplaces • • 8h ago

Fireplace my dad made

1 Upvotes

My dad started out as a sculptor and went into the trades as a finisher and 40 years later he has done some pretty impressive pieces. Hes incredibly humble about and he hates any kind of praise which I understand but when i try to explain the process to people they don’t really get it besides the small few so i wanted to post this where people could appreciate his work. Helped him pour it throughout a couple weeks its not monolithic its a few pours with a brush style finish


r/Fireplaces • • 16h ago

Wood burning fireplace

Thumbnail
gallery
2 Upvotes

I’ve owned my home for about 4.5 years and largely ignored my fireplace. Anyway, I’m realizing the error of my ways and doing what I can to make it as safe and clean as I can. I started cleaning inside the hearth today with good progress, but still more to be done. When I was in the hearth, I noticed something that I thought to be odd. There’s a tube in an otherwise square flue, with gaps around it and no transition. Surely that’s not good? I have very little money to put into this, but I’m wondering if something is actually missing. I am also working on cleaning out the inside of the hearth and flue. I was trying to get it prepped for emergency heat if needed this winter, so it will take a few more sessions of elbow grease to finish that. Should there be something to transition the square opening to the round tube? Also how the heck am I supposed to safely clean around the square opening inside the hearth?


r/Fireplaces • • 13h ago

Flue seems like it isn't hooked up right.

1 Upvotes

Went to adjust the flue on a new to me fireplace and the thing just fell down. I've got it propped back up but it seems like it's not where it's supposed to be. Before I go any further I thought I'd see if anyone can tell by looking at the video what's going on here. How is this supposed to be fixed in place/ actuated. Any learning resources would also be appreciated. Thank you!


r/Fireplaces • • 13h ago

Everest III for New Build?

1 Upvotes

I am preparing to build a home that will be roughly 2650 sq ft., and I am leaning towards an Everest III woodburning fireplace. I know it is rated around 85,000 BTUs and claims a max sq footage of 2500, but I intend to run it as a supplement to a hear pump. My hope is that the electric heat strips will never, or as rarely as possible, turn in the winter (Midwest climate). I haven't seen much specifically from users regarding this iteration of this fireplace, but it appeals to my family, and my wife like the retractable doors option.

Just fishing for some insights and potential validation for the choice if it seems reasonable. The horizon was a thought as well with its larger Firebox, but of course it lacks the retractable doors. Thanks for any insights!


r/Fireplaces • • 17h ago

New homeowner (stupid) closed doors on wood burning fireplace as a fire was dying down

2 Upvotes

I’ve since learned this was an idiot move.

Now the room smells like smoke still 3 days later. I’ve removed all of the ashes, wood, and swept it clean. I’ve put a box of baking soda and cups of white vinegar in there. The smoke smell is still triggering headaches. I just want to enjoy my new home - will a creosote log solve my problems?

Note: we had the chimney inspected prior to the incident - he said all was well and it didn’t need cleaning yet.


r/Fireplaces • • 22h ago

Delayed Ignition Rattles My Nerves

4 Upvotes

I have an older Napoleon GD33 direct vent propane fireplace. No issues the first ten years, then this delayed ignition issue to varying degrees for the last 5 years. Around that time was the big outdoor tank was replaced at the ten year mark and I recall them having to return to replace the outdoor regulator. I get it cleaned and serviced every year but it never works like it used to. Some years it seems bit better after he cleans and checks it, other times not. Like this year, it scares the crap out of me and I hate to put it on. We have a different Vermont Castings propane fireplace downstairs that doesn't do this. Attached is a video of the delayed ignition. I cant seem to add the video and pics of the pilot light, so I will put in comments below. Thanks for any help.


r/Fireplaces • • 15h ago

Hamster with fireplace?

Thumbnail reddit.com
0 Upvotes

r/Fireplaces • • 17h ago

Fireplace Options

Thumbnail
gallery
1 Upvotes

I’m about to move into a condo and I’m not a huge fan of the fireplace. It appears the stone is fake. So I was wondering if it would be best to tear out the fake stone entirely or just frame over it and cover with drywall so I can pick my own tile. It’s a little tricky because the walls on each side are at an angle so I’m not sure how the final shape could look.


r/Fireplaces • • 17h ago

Faux brick on insert is cracked and crumbling. Can it be repaired?

Post image
1 Upvotes

My wood burning fireplace has this fake brick on the bottom and back walls. Both are cracked and crumbly. The insert is long discontinued.

Since it's not real brickwork, can this even be repaired or what's the best plan here? I expect I don't want to know the answer to this but can it crack if water has been getting into the chimney chase?


r/Fireplaces • • 18h ago

How often or should we ever replace the fake wood in fireplaces at home?

Thumbnail reddit.com
0 Upvotes

r/Fireplaces • • 18h ago

Please help with baffle board installation

Thumbnail
reddit.com
1 Upvotes

r/Fireplaces • • 18h ago

Valor G4: Fluted black vs. Brick

1 Upvotes

I'm deciding between the fluted black liner and the brick liner for a Valor G4 gas insert. The showroom only has the brick. Does anyone have a photo or video of either of these they could share?

The brick in the showroom looks very different (darker) than the brick in the Valor design tool. That's good, actually. If there were black brick, I'd be done.

I'm trying for a traditional, "just looks like a fireplace" look since this is an old house. I don't want to bring in anything that looks too modern, since it will seem out of place. The plan is the Craftsman / Edgemont black front, traditional logs, and the large black backing plate.


r/Fireplaces • • 1d ago

Hearth tiling advice

Post image
1 Upvotes

r/Fireplaces • • 1d ago

Non-Combustible Beams

Post image
0 Upvotes

r/Fireplaces • • 1d ago

Outdoor Built In Fireplace

Thumbnail
gallery
8 Upvotes

Our outdoor gas fireplace doesn’t have a blower. The heat rises and hits the wooden mantle quite a bit. It seems okay to withstand it, but was wondering if a blower would be better to install? That way the heat gets pushed out and the mantle doesn’t get so hot.
Don’t know the make/model as there was no paperwork on it when we bought the house.


r/Fireplaces • • 1d ago

Need advice on propane hookup

Thumbnail
gallery
3 Upvotes

Moved into house 6 months ago, had a leased tanked (huge!!) from original homeowner. They had a large one to heat the pool but never set up heater and only used propane for fireplace.

Had company remove tank and I want to put my own tanks on property for fireplace ONLY.

Currently the line is still piped to the fireplace, with a regulator outside crawlspace followed by a shut off and a cap on the end of the line. Pictures attached.

Is this plan feasible - remove regulator that is currently on line. Install Two 40 lb tanks with lines running to a joint regulator, flame king sells this set up. 11” water column from this regulator, fireplace requires 10” water column, fireplace is 15,000 btu. Is this possible?

20 foot run of line through crawlspace, and 3/8” line.

Will only use a few hours a week.

Any advice is welcome.


r/Fireplaces • • 1d ago

No clean out door

Thumbnail
gallery
5 Upvotes

What to do if my fireplace has an ash dump door, but no clean out door. Idk if it was removed and covered up, but it looks like there is a mountain of ash below and no way to clean it out. Can I simply remove some bricks and install a door?


r/Fireplaces • • 1d ago

Moving a mantle

Post image
0 Upvotes

We just moved into this house. You can't tell from the picture but there's a single gas line coming in from the right that's capped. I'm not sure if it's supposed to be a gas fireplace or gas starting wood fireplace. But that's not the question right now. In fact we haven't even decided yet if we'll use it at all.

The question is about the mantle. I want to mount a TV above it but it would be too high (even for me!). That's what we did at the previous house. My questions are - can the mantle be lowered, and if so, would I call someone that installs/services fireplaces or a general contractor? The mantle and the trim are wood if that means anything.


r/Fireplaces • • 1d ago

Napoleon Astound 74” Built In NEFB74AB

1 Upvotes

Hello! Hoping someone here can answer my question: we are looking at the Napoleon Astound 74” Built In NEFB74AB. We have a dedicated 20 amp line to an outlet that will be behind the fireplace. The sales people told us we were ok to just plug it in but the installation manual says to hardwire it. Would I be ok just plugging into the existing dedicated outlet?

Thanks!


r/Fireplaces • • 1d ago

Is this garland a fire hazard?

Post image
1 Upvotes