Hi all;
I have been recently learning how to design my own things, and being from a programming background, I wanted something I could write a MCP server to use iteratively with Claude Code. I first my first design 3 days ago, and have been iterating - it’s a lot of fun. I wanted to post a bit about the journey over the relatively short period and hopefully encourage others to do the same. So below is my palette journey:
Version 1 was one flat file of hard-coded shapes. The wells were straight-sided cylinders spaced too far apart, the rim runes were too small to print well, and I'd never decided the overall size. So: curved, domed wells like an artist's palette (later steeper), a denser layout with straight rows, and 250 × 175 mm (85% of A4, because full A4 doesn't fit the 256 mm bed). I have a P1S - if I had a larger printer perhaps I would have gone to A4.
I then had to design for a 0.4mm nozzle as before I never really taken that into account:
Rune strokes were too thin and some overlapped. Now they're 1.4 mm (about 3 extrusion lines) with at least 0.8 mm gaps, checked by a small Python script written by Claude of course.
No overhangs: every feature is a vertical extrusion, a dome on a floor, or a bowl cut down from the top. Before I naively put in overhangs!
Test prints of raised vs engraved text: raised was clearly better, even though I desperately wanted to cut down on material.
The drybrush bay was wasted flat space. I designed a dense like a mandala: rope, plaits, interlaced loops and a triskele at varying heights, with hard vertical walls and soft half-ellipsoid domes. I thought this would be great for drybrushing over.
The issue then became that my poor MacBook air could not render anything! Exports in OpenSCAD 2021 (CGAL) took hours; the Nightly build with Manifold takes about 4 seconds. After all this, I had my first design! Which I printed, but now I was addicted!
I then designed the follow up palette, a Norse one. I did the following
Slab 12 → 10 mm, drybrush bay on a 2 mm floor, rim 12 → 9 mm, sparser background lattice.
The freed space went into bigger wells: 6 small + 12 medium, and one 112 × 51 mm trough instead of two dishes.
Slicer iterations: 204 g / 11h41m → 191.8 g / 11h11m → 189 g / 10h54m.
Lesson: most internal solid infill came from shells under the curved well walls, not the slab, so thinning the floor saved less than expected. Travel is about 2h40m (~24%), mostly from the many raised decorative islands.
After this, I had 2 palettes! I went onto design a water cup (linked but won’t bore you with more detail) as well as a brush holder (WIP)!
If you want to see or print them
Celtic Knotwork Paint & Drybrush Palette: https://makerworld.com/en/models/3637493-celtic-knotwork-miniature-paint-drybrush-palette
Celtic Knotwork Miniature Painting Water Cup: https://makerworld.com/en/models/3643562-celtic-knotwork-miniature-painting-water-cup#profileId-4179554
Norse Knotwork Paint & Drybrush Palette: https://makerworld.com/en/models/3649610-norse-knotwork-miniature-paint-drybrush-palette#profileId-4187030