r/papercraft • • Sep 30 '25 Bravo Regret

Build Template Instructions on how to download from CreativePark without “Canon Print” nor CanonID

143 Upvotes

As some of you may know, as of September 29th 2025, the Canon Creative Park website now requires the Canon Print software – which itself requires a Canon printer to be turned on and connected to your computer/phone/tablet (I think) – to download and print papercraft listed on their website.

They did give warning for this, but I didn’t realise just how restrictive it would be. I do not own a Canon printer. I had previously saved roughly 30 entries from their catalogue. However, I now realise that I would like access to more of them.

As expected, the barriers to downloading the PDF files are almost nonexistent, all they have done is remove the PDF’s URL from the download page. There is no authorization or authentication required to download any of the files.

I have found a trivial way to download the PDF’s, and you don’t need to be signed in nor do you even need a CanonID for any of the files.

All you must do is find the entries “contentsId” and then affix that to a base URL. With a suffix for the design and the instructions. The base URL was found with a single Google search – “site: https://creativepark.canon filetype:pdf”

I have created a simple single click bookmarklet which will attempt to download both the pattern and the instructions.

  1. Bookmark any page (doesn’t have to be a Canon Creative Park page), ideally in your browsers bookmark toolbar.
  2. Edit the bookmark (right click “Edit Bookmark” or “Edit” depending on which browser you are using).
  3. Re-title the bookmark something like “Canon PDF Download”
  4. Replace the url with this code:

    javascript:(function(){const i=document.querySelector('meta[name="contentsId"]').content;const firstDownloadArea=document.querySelector('div.downloadArea');const d=firstDownloadArea?firstDownloadArea.querySelectorAll('div.downloadBtn').length:0;const t=d===0?1:d;const u=[];for(let n=1;n<=t;n++){const s=n.toString().padStart(2,'0');u.push('https:/'+'/creativepark.canon/downloads/contents/'+i+'/'+i+'-'+s+'.pdf')}u.forEach(e=>{const a=document.createElement('a');a.href=e;a.download='';document.body.appendChild(a);a.click();document.body.removeChild(a)})})()

  5. Now when you visit a design page, like this one, which apparently needs a CanonID, all you have to do is click the “Canon PDF Download” bookmarklet, and the both the design and instructions will be downloaded.

If using a Chrome based browser you may need to click “allow” on the popup that says “Download Multiple Files”

The bookmarklet should even work for pages with multiple "print" links.

If you really wanted to, you could create a simple bash script to check every file name from 0000000 to 0032181, starting with the suffix -01.pdf and so on. You could even run the requests in parallel without the fear of any rate limiting. You might just end up with around 40gb of PDF’s.

EDIT: The bookmarklet has been improved.

EDIT: as of 2025-10-29 it appears to no longer work. This is four weeks after the initial change, we can only hope it's a temporary error

EDIT: As of 2026-01-14 nayeet has created a new bookmarklet which now works again!

EDIT: 2026-03-27 There's now a free and easy website/service to automatically download Canon PDF's, just paste the url, and then the direct links to the PDF's will be listed: https://download.clean-fog7772.workers.dev


r/papercraft • • Jul 22 '21

Announcement The Papercrafter's Beginner Guide to Making Things - 6th edition

229 Upvotes

Hello, and welcome to our kind community! Feel free to post questions here, or make a thread in the subreddit as a textpost and flair it accordingly! And please let me know if any links aren't working, or if you find something new! Thanks, and happy crafting! :)

Finding a Model
A simple Google or Deviant Art search is highly effective. However, if you just want to browse for something to make, here are some sites:
www.papercraftplaza.com - add your files to their collection! There's even tutorials for if you're interested in 3D modelling and making your own crafts.
http://paper-replika.com/index.php
https://boards.4channel.org/po/ - scroll to the bottom and click "catalogue" for easier viewing, and to avoid typical 4chan comments - Note: this can be an extremely NSFW website
http://papercraft.wikidot.com/
http://www.papermodelers.com/forum/card-models/
http://zealot.com/#card-models.633
http://cp.c-ij.com/en/
http://global.yamaha-motor.com/yamahastyle/entertainment/papercraft/ - this doesn't work anymore, so I uploaded all of the files here
http://www.cubeecraft.com
https://tamasoft.co.jp/pepakura-en/gallery/list.php
http://www.papercraftsquare.com/
http://www.korthalsaltes.com/visual_index.php
http://papercraftparadise.blogspot.ca/
http://paperkraft.blogspot.ca/
https://papermau.blogspot.com/

specializing crafts:
http://www.pokemonpapercraft.net/
http://jav-papercraft.blogspot.ca/
http://sabi96papercraftbox.blogspot.ca/
http://aliens.humlak.cz/aliens/aliens_papirove_modely_gb.htm - click the "banner menu" at the top right


Paper
Any paper works, HOWEVER, cardstock is usually better, especially when the model you're making has a lot of colour on it, or will be fairly large and needs support. Some specialty projects (e.g. Gundams) need coloured paper, as their templates can come completely white.

This is regular printer paper.
This is a type of cardstock.

Any brand will do. I was using this from Walmart for awhile, but then I ran out and picked this up at my local Staples. Don't worry too much about running out; you won't unless you're teaching a class or something.

Cardstock comes in many different thicknesses, and while I can't tell you what to use, just remember that:

  • higher numbers means a sturdier model, BUT the harder it'll be to cut, score, and fold
  • lower numbers means a less sturdy model, BUT it's easier to cut, score, and fold

Personally, I build in 65lb/176gsm and use 110lb/199gsm for making multi-use templates or really rough drafts for cosplay parts.

Paper can also come in different colours! Which means you only need your printer for black ink/toner, and you can save time by not needing to match edge colours.


Printing
Inkjet or Laser?

I used to use an inkjet printer. (This printer finally died on me, and I haven't made much since :( RIP my "hacked" Canon).
If you're buying a printer, try to find one that feeds from the back, and prints to the front. We want to avoid paper warping since cardstock is thicker than regular printer paper. (Addendum: I have used a front-printing Canon MX700 for a quick papercrafting fix, and it did not warp the page. Your mileage may vary!)
I have used a laser printer, but when I went to make folds, the toner started chipping off and getting all over my hands. This is purely anecdotal, but I suggest inkjets because their ink soaks into the page, rather than just melting toner on top of the page. (Addenum: Some laser printers have a setting for thicker paper types, and will accordingly slow down so the toner melts more evenly onto the page, and reduce toner chipping. Your mileage may vary!)


Cutting
Typical cutting tools are a cutting mat, an X-acto knife (or any similar brand) with #11 blades, a box cutter, or scissor.

I bought some specialty craft scissors that I absolutely love, and I use them mostly for macro cuts and separating pieces from a page. I also use my trusty X-acto along with a pack of 100 blades I bought from Amazon over 10 years ago, and my 8.5x11 cutting mat (which I find a tad small but I got it for cheap, so whatever).

I've acquired a Speedy Sharp sharpener. I have found it quite helpful since our craft only dulls the blade tip.


Folding
A nice straight fold involves a bit more work called "scoring". This is done by running the back of your knife, or an empty ballpoint pen, or any other blunt edge along the line of the glue tab. Push hard enough to leave an indent, but not hard enough to actually cut through the page. Here is an exaggerated example using a knife and a ruler. The left line and angled lines are scored, while the middle/more bumpy line is just a regular fold.

Everyone seems to score on the front of parts, but I personally prefer scoring on the back so I don't mess up the outside. This usually involves more work because you have to hold a piece up to a light source, and make light pencil marks on where the ends of lines and glue tabs are. Sometimes if I know a line or tab will be a valley fold, I'll score on the front, but 80% of the time, I make back scores just to be safe.


Gluing
Common glue brands are Aleene's Original Tacky Glue, or Elmer's glue. You can also use a hot glue gun (I have no experience with this, so I can't really give pointers) or wood glue (it dries yellow so you'll need to be careful to not get any on the model itself). I don't suggest using glue sticks. If you're in a rush, tape can be used.

With tacky/white glue, a very thin layer is sufficient for most glue tabs. I put a pea-sized drop of glue on some scrap cardstock and use a toothpick to apply it. If you need help holding a small glue tab, tweezers can help a lot.


For some advanced tips, check out our subreddit wiki!

Previous refresher post archive:
1, 2, 3, 4, 5


r/papercraft • • 1d ago

Model Made a model of my desk

Thumbnail
gallery
388 Upvotes

r/papercraft • • 3h ago

Request Anyone have a template for Aprilia Tuono 457

3 Upvotes

My friend sent me a reel of affordable gifts and I want to gift him an Aprilia Tuono 457 except that I can't afford it, and I dont want to disappoint him. Anyone has a template?


r/papercraft • • 23h ago

Model Finished my first papercraft. Need some advice

Thumbnail
gallery
36 Upvotes

Just finished my first papercraft project, a StuG III and learned a lot of things that can be improved. The ugly printing streak is the obvious start. I do have questions for people who have more experience in this craft than me.

How do you glue them together without ruining the structure?

I'll say the biggest challenge in this project has been trying to glue all the flimsy paper pieces together neatly. Especially the last parts on a 3D shape where you just about to close the shape and can't really see the adhesive tab anymore. Any other advice on how to improve is also appreciated. (I would also greatly appreciate if you have any good StuG III template to share. I just love the shape of this thing)


r/papercraft • • 1d ago Mindblown

Model Papercraft Pendulum Clock

Thumbnail
gallery
66 Upvotes

r/papercraft • • 1d ago

Model did it from scratch twice and both times he looked fucked up and abused

Thumbnail
gallery
10 Upvotes

biggest issue is that my fingers stick to the paper, when I'm glueing, and rip the colour layer way in the second one I tried painting over the ripped parts but it looks so shit

edit: I accidentally included that fox picture, dont mind him he chilling


r/papercraft • • 16h ago

Build Template 2007 Super Paper Mario Famitsu DS-WII papercraft kit.

2 Upvotes

Original post: Hi, so basically I have managed to get ahold of the 2007 July edition SPM papercraft that came with the magazine, and have scanned it to share with the community. If anyone is good at digital editing and stuff please let me know because you may be able to sort out the small lighting issues I have had with my scans.

https://drive.google.com/drive/folders/1PxHrGMpY6gOPrHzNa48Fw2cxfckulQik

Here is the drive with the scans, it includes measurements as well. Let me know if I forgot anything!

ALSO! If anyone could create versions that are already to scale and ready to be printed or guide me on how best to do it id really appreciate that. I've never tried to preserve a papercraft before so kinda dont know what im doing. thanks in advance.

Edit: I found the second half! the august part of the kit is on its way to me and will be scanned asap, making my scans the complete kit

Note to r/papercraft. Hi, i am posting here to ask for help fixing up my scans to be as good as possible. Thanks in advance for any advice. I really wanna preserve this so anyone can make it


r/papercraft • • 1d ago

Model Love Bug, folded by me

Thumbnail gallery
15 Upvotes

r/papercraft • • 2d ago

Model Hidden object puzzle centered around folding paper

Thumbnail
gallery
50 Upvotes

I've recently been working on a puzzle designed around folding a piece of paper to uncover a hidden item, in this case you're looking for a fish. The paper is pre-folded so the player doesn't need to create folds, just use the folds that are already there. There's a scene on either side of the page that aligns to create the hidden item.

They're pretty fun and thought others might be interested in the idea and could take it even further. I don't know if they're actually something people would find interesting to solve though, so would be interested to hear what others think.


r/papercraft • • 1d ago

Build Template Truncated tetrahedron made from 8 folded paper strips – free templates in any size

Thumbnail
gallery
8 Upvotes

Each "cell" is a single strip of paper, cut and folded into a little ring of vanes that all point to the centre of the ball: 4 hexagon cells and 4 triangle cells, glued face to face. Printed on coloured paper of 120 g/m².

The method is described in Magnus Wenninger's Spherical Models (worth buying if you like polyhedra). The templates themselves are not copied from the book: they are computed from the geometry of each shape.


r/papercraft • • 1d ago

Model The cardboard houses are cut. The corners keep popping apart.

Post image
13 Upvotes

I'm making a little Christmas village for the mantel out of old shipping boxes. I cut the wall and roof panels with my hoto EdgeFlow, but getting the houses to stay together is turning out to be the fiddly part.

The hot glue peels off the angled corrugated edges when the corners flex. The panels are cut, but the joints aren't holding.

Would you reinforce these corners with folded card tabs on the inside before gluing? I'd like to get one house solid before I start decorating the whole village.


r/papercraft • • 2d ago

Model United a320-200 papercraft from Gajet

Post image
16 Upvotes

r/papercraft • • 2d ago

Request Is there a tool I can buy to make these metal fastener "grommets"?

Post image
7 Upvotes

r/papercraft • • 2d ago

Model Completed the build

Thumbnail
gallery
51 Upvotes

It took me quite a while and it's my first model that I ever did. Would love to do more but I gotta take a break. I would like some suggestions as I want to cut the template properly and glue them properly. I have used a normal blade to cut and fevicol to glue things together. I live in India so I want to know what alternatives I can use to cut and glue things properly. Thank you in advance for any suggestions.


r/papercraft • • 2d ago

Model My current origami collection at home

Thumbnail gallery
6 Upvotes

r/papercraft • • 2d ago

Request Need advice as a beginner.

Thumbnail reddit.com
2 Upvotes

r/papercraft • • 3d ago

Model I made it!

Post image
109 Upvotes

I had made a post on the other week asking about how to deal with wrinkled paper, becaus i had used the wrong paper and the model was a mess, I got another paper a made a new model, isento perfect and my printer is with a problem with black ink but is way better. For a first papercraft it isn't horrible, im proud


r/papercraft • • 1d ago

Build Template I put my name on every paper house except the one that needed it

0 Upvotes

I brought twenty little paper houses to the school fair and sold nineteen. I could have sold the last one three times. Every time somebody reached for it my niece said, “That one’s occupied.”

There was no furniture inside. You could see right through the windows to the trestle table. I thought she was saving it for herself, so I slid it underneath my chair. She put it back.

On Friday night I’d printed a little address for each house on the label maker with the two-line preview. Street on top, house number underneath. My niece had sat beside me reading the addresses out loud before I stuck them above the doors. For the last house she’d dictated just a number. Fourteen. No street.

Near closing time her best friend came through with her dad. He had his hands full of raffle tickets and a goldfish drawn on a paper plate. The little girl saw fourteen, knelt on the floor and looked through the front door at table height.

There was writing on the underside of the roof. I’d folded it up without noticing. It said YOU CAN STILL COME OVER.

Her family was moving on Monday. Number fourteen was the house she was leaving. My niece carried it out to the car with both hands.

As an Amazon Associate I earn from qualifying purchases.


r/papercraft • • 2d ago

Request Help finding complete template.

Post image
5 Upvotes

My son loves to build paper plates from printable templates. He's wanting to build this BAe Jetstream 31/32, however, we cannot find the complete template or link to purchase. Does anybody have a link or template they would share? Thanks.


r/papercraft • • 3d ago Heartwarming

Model I made a puzzle card for my partner! "You complete me" 🧩❤️

Thumbnail
gallery
83 Upvotes

r/papercraft • • 2d ago

Request The paper town folds flat until the last house goes on. One cut would let its owner come home.

0 Upvotes

Mina pinches the two ends of the paper street together. Five families wave through five front windows. The sixth house falls forward, hits the bakery, and knocks the whole row flat. Across the table her grandfather says, “Well, we did always have trouble with number six.”

He drew the houses from memory. She cut them as one long strip for his sister's birthday card. It has to travel in an envelope, then stand up by itself when she opens it. The trouble is a paper tab behind the last house. It's the only thing holding the postman upright, and it's glued across the fold.

Granddad fishes the little spring scissors on his keyring out of his pocket and hands them to Mina. The tips fit through the postbox slot. She can cut the tab without pulling the roof off. The delivery route might still need a small amendment.

“Where did he finish his round?” she asks.

Granddad points to number six. The postman was his father. He used to come home through the kitchen so his muddy boots wouldn't touch the front hall.

Now Mina can leave the tab where it is and cut a back door that swings on it. When her great-aunt opens the envelope, the last person on the street gets to go inside.

For a hinge that small, would you score the door before cutting it free or after?


r/papercraft • • 3d ago

Model Cold war soldier i made with paper

Post image
34 Upvotes

r/papercraft • • 3d ago

Request need abstract origami

4 Upvotes

I need abstract origami for my architecture project.It needs to be get inspired by nature like leaves of a flower etc..

do you guys have any tutorial or photos for inspiration?


r/papercraft • • 4d ago

Model Papier-mache mushroom

Post image
54 Upvotes