r/rfelectronics • • 8d ago

SweepGuide – NanoVNA Software Beta Testers Wanted

2 Upvotes

I've been developing SweepGuide, a new application designed to help NanoVNA users better understand their measurements and improve their antennas and RF systems.

Rather than simply displaying graphs, SweepGuide interprets SWR, impedance, reactance, and other measurements, explains what they mean in plain English, and provides practical troubleshooting guidance.

Features include USB connectivity, live sweeps, antenna analysis, coax and choke testing, filter analysis, and saved measurement comparisons.

Currently running on Linux, with Windows support planned.

I'm looking for NanoVNA users interested in beta testing and providing feedback.

Learn more and sign up at https://sweepguide.app

73!


r/rfelectronics • • 9d ago

Earlier first design

Post image
14 Upvotes

r/rfelectronics • • 9d ago

question How do I make a diy filter

4 Upvotes

Hi, I'm making a ADSB reciver from scratch without RTL SDR under 5-6$ i know absolutely zero about the RF things, i want to make a PCB based filter, with center frequency 1090 MHz, 100-200 MHz bandwidth, and some kind of band kill filter for nearby cellular frequencies. I'm using 1.6mm FR4 blanks. Lowest achievable pitch 0.5 mm and trace width 0.25 mm , I use toner transfer. Please help


r/rfelectronics • • 9d ago

Question about spectrum analyzer measurements

Thumbnail reddit.com
1 Upvotes

r/rfelectronics • • 9d ago

question Ansys Question

Post image
0 Upvotes

Is there a realistic reason to follow these parameters for hfss sims or is it just how it's programmed


r/rfelectronics • • 10d ago

Dual-band antenna 868Mhz, 2.4Ghz with CC1352

8 Upvotes

For one of my customer, I'm designing PCB antenna for the CC1352 that has two ports for each frequency. Is it better to use a diplexer/switch and have two PCB antennas or one dual-band antenna with the two resonances ? The PCB will be 4x4cm with 4 or 6 layers and I can dedicate half of the board to the antennas. The grey box is the battery and the other the processor. I've tried some simulations but I'm not sure I go to the right way. A good resonance at 2.4Ghz is difficult to find.

Option A: two separate antennas, a meandered IFA for 868 MHz and a small IFA for 2.4 GHz, one on each port.
Option B: one dual-resonance antenna with a diplexer (or RF switch) between the two ports.

What do you think ?


r/rfelectronics • • 9d ago

Rf test engineer advice, getting some experience with simulating design and tuning on ads and think I enjoy taht more any advice ?

0 Upvotes

Advice please


r/rfelectronics • • 10d ago

Trying to get in to RF in university

1 Upvotes

How is the job market

Is the pay equal with other subfields in europe

Are you guys safe from ai

Is masters enough or do I need doctorate

I am trying to start with low pass filter design and simming it in openEMS.

Most rf roles are in defense industry or telecom in my country but I plan to move to germany or holland at some point. How are my chances against other subfields


r/rfelectronics • • 10d ago

ADS Momentum: changing permitivity crashes simulation

Post image
4 Upvotes

Hello all,

Recently when working with Momentum sims in ADS I encountered the issue that any changes to the permittivity of an arbitrary layer in a substrate would prevent the simulation from initializing with a "Substrate calculation failed" error. Even small changes from the default, like changing FR4's permittivity from 4.6 to 4.7 would cause the issue. It occurred in the ADS demo workspaces as well, so I know its not specific to how I created my workspace/setup. Additionally, it did NOT occur on different ADS installs on other computers, so something in this install might be corrupted.

Feel free to ask for more details; any help or experience with this odd issue would be very appreciated.

Thanks.


r/rfelectronics • • 11d ago

DIY mmWave Radar – How difficult is it to build one, and what does it cost?

Post image
26 Upvotes

Hey everyone!
I recently came across this interesting DIY mmWave radar device from NorthworksLab (see attached picture/video), and I’m really curious about building something similar.
It looks like a small portable radar with a screen displaying detected targets and their positions in real time.
I’d love to learn more about this project, especially:
Technology: What type of mmWave radar sensor is used? 24 GHz, 60 GHz, 77 GHz, or something else?
Components: What hardware is required? Radar module, microcontroller, display, antennas, battery, etc.?
Total cost: How much would it cost to build a similar device from scratch?
Difficulty: Is this a beginner-friendly project, or does it require advanced electronics and programming knowledge?
Software: Is there existing open-source software or code available for this kind of radar visualization?
Detection capabilities: What can it actually detect? Moving objects, people, animals, distance, direction, speed?
Range and accuracy: What is the realistic detection range, and how accurate is the tracking?
Tutorials: Are there any good guides, GitHub projects, or communities to get started?
My goal would be to build a compact, portable radar with a live display, similar to the one in the video.
Any advice, component recommendations, build guides, or personal experiences would be greatly appreciated!
Thanks! 🚀


r/rfelectronics • • 10d ago

Has anyone interviewed for an RF Engineer Internship at i3 (Integration Innovation)?

1 Upvotes

I have an interview coming up with i3 for their Summer 2027 RF Engineer Internship and wanted to see if anyone has interviewed or worked there before.

I've already completed the initial screening, and my next interview is a 30-minute virtual interview with an RF engineer.

I have some hands-on experience with RF equipment, including spectrum analyzers, VNAs, signal measurements, and troubleshooting, but I'm still building my understanding of RF theory.

I was wondering what kind of questions they typically ask, how technical the interview is, and what the internship and work environment are like.

Any advice or insight would be appreciated. Thanks!


r/rfelectronics • • 11d ago

question Are there antennas that can physically change their shape or characteristics to tune into different bands?

24 Upvotes

r/rfelectronics • • 11d ago

question Has anyone reverse-engineered the RF protocol used by Mattel/Hot Wheels RC toys?

9 Upvotes

r/rfelectronics • • 11d ago

Expertise within RF Wireless?

8 Upvotes

As one progresses to mid, senior, lead level and beyond in the RF Engineering field should I have a particular "speciality" that I am an expert at? For example, the RF design group at my current workplace has one guy who's the resident expert on PAs, such as GAN MMICs used in high power transmit chains. Or is it better to take a more broad approach to expand knowledge in various facets?


r/rfelectronics • • 11d ago

Quartus II University Program VWF Error

Post image
1 Upvotes

I was trying to simulate the waveform and this error occured. I've been fixing it for hours but no hopes. I complied without any problems. Have anyone met this problem before?


r/rfelectronics • • 11d ago

CRGO vs CRNGO: What Are the Key Differences in Electrical Steel Applications?

Thumbnail reddit.com
0 Upvotes

r/rfelectronics • • 11d ago

question Should I keep going if i cant make it into grad school?

6 Upvotes

Hello all, apologies for polluting the sub with low quality non-technical stuff but I feel like im a spot of immense despair about my future. Im currently a 3rd year undergrad. I was never quite the best student, and my grades have always suffered from self-inflicted procrastination or my chronic illness. Im currently looking at a low C, and it feels like every semester falls apart because of my poor executive function. Im quite worried I won't be able to meet the minimum to get into a masters program. Its not that I dont care about learning or that im not interested in rf. I have in total over a year of rf-related internships so far with work covering simulation, design, and testing, mostly of antennas. I have at least what I would consider a well-invested home bench and decently complex personal projects.

Alot of people say that a masters is the bare minimum for getting into meaningful RF work. It's hard to find mentorship on this particular issue because it's hard to admit I'm doing poorly in school to people I want to take me seriously.

What can I really do? Trying to take non-rf related courses seriously feels impossible. Is it possible to get into design after graduating without a masters? Is it plausible to try and get a masters later after accumulating more work experience? Im worried that the future will become much more credential gated and I wont be able to find work anywhere. I feel pre-resigned and stressed out and depressed all the time. Should I just give up on any prospects of working in RF?


r/rfelectronics • • 12d ago

question How much of experience do I need to have with Maxwell's equations to understand antenna radiating mechanisms?

15 Upvotes

I have antenna theory this semester and I am very weak in it. All I know is "oscillating dipole radiates EM fields". I suddenly find antennas interesting and cool, so thought I would learn it from basics or even consider it as a career (maybe, IDK for sure). So yeah I have very poor amounts of experience with Maxwells equations, I dont even remember anything of what I learnt in electromagnetic theory. So is just knowing those equations enough or do I need more than that?


r/rfelectronics • • 11d ago

Capacitive Sensor Help

Thumbnail gallery
3 Upvotes

I think I am seeing a typo in the book ‘Pulsed Power Systems‘ by H. Bluhm or I am missing something in my run through of the example equation.

It looks like there’s an extra R variable in equation 9.5 that disappears in the next line when they divide everything by C. Could you guys please either verify my thoughts or help me understand the R term?

Thank you!


r/rfelectronics • • 12d ago

Should I get basser rf certificate if I currently work as an RF Testing Intern?

10 Upvotes

So I feel like potentially I may have a shot with interviewing for Apple. I have gotten an interview with Apple in the past for a SWE role. The works are pretty tied together so I feel like I may be able to get an Wireless RF Systems Validation Engineer. The work that I do right now in the company is so closely aligned with that job description.

I was wondering if I should spend ~1,500 on the basser certificate. Would that certificate give me knowledge that would prepare me for the interview when they ask about RF essentials?

Should spend money and get that certificate or do you know I can search for my own learning materials online?


r/rfelectronics • • 12d ago

question Question on how to connect a resonator to a pcb

2 Upvotes

Hey,

I'm currently designing a pcb for a VCO I designed in ADS. I'm using a resonator and I don't know how I should design the footprint for it/ how to integrate it into my pcb. I need to couple it with a capacity of 3pF to the emitter branch of my VCO but I dont see any connectors.

datasheet: https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/3988/DR12F36Q0892DNB.pdf


r/rfelectronics • • 13d ago

Omnidirectional Antenna Project (Electromagnetic Course)

Thumbnail
gallery
193 Upvotes

I look back into my projects and found this one that I made when I was taking my electromagnetic class last year. From what I remember this is an omnidirectional antenna quarter-wavelength, I think I design it for 2.4GHz but the results showed that it operates between 2.48 to 3.05 GHz, with a deep reflection coefficient of -17.50 dB at 2.56GHz. Now, I know the importance of that VNA measurement.


r/rfelectronics • • 13d ago

Seeking advice on impedance matching and antenna design for fusion applications

3 Upvotes

Hello everyone,
I’m a graduate student in electrical engineering with a research focus on nuclear fusion. I’ve recently started working on impedance matching and antenna design, and I’m currently using Keysight ADS for simulations.
I don’t yet have access to measurement data, and there is limited experience in this area within my lab. I would really appreciate guidance from researchers or engineers with relevant experience, particularly on how to validate my simulation models and what to prioritize before moving on to experimental measurements.
If anyone is available for a more detailed discussion, I’d also be happy to arrange a paid consultation.
Thank you for your time and any advice you can offer!


r/rfelectronics • • 13d ago

question What makes a good RF project for learning?

9 Upvotes

I study mechanical engineering and have a background in PCB design, but have no RF experience. I want to design a small board with an MCU, 1 payment SIM, modem, etc. to call the Spotify API and have hands-free advanced functionality in my car. I'm excited to learn in order to get this project working, but what makes a good RF project? Should I intend to route the full antenna on board, or is the project still useful to my technical learning if I just buy a flex LTE antenna and pigtail to a u.fl? Thanks!