Stained pine made from old stud cutoffs.
I started with ripping stud cutoffs down to 3/8" planks, then planed down to 1/4" and sanded. Strips were cut from the planks to width, then stained on all sides. This allows me to use both sides when cutting out pieces.
From there, I cut pieces to shape. Most done with a miter saw, anything less than 1/2" was cut by hand. Pieces were then moved to the sander for final shaping. Grain direction and overall appearance were considered for every individual piece to enhance the flow of this project
Next, each piece received a final staining. I used dozens of Qtips to apply anywhere from 3 to 6 different colors to the sides and edges of each white piece, and black to the edges of the vine, leaves, grapes, and trellis.
The leaves, trellis, and grapes were assembled before final glue up. The rest was cut and assembled piece by piece, starting with the vine. Glued together on 2 layers of 1/4" birch plywood for reinforcement and to help prevent warping.
The frame was glued and nailed with 2" coated sinkers on all corners and centers. The entire piece is coated in several layers of hand-rubbed, water-based polyurethane to preserve the wood and protect the colors.
Approximately 100 hours went into designing and building this original piece of art.