r/classicmustangs • • Aug 22 '22

What year of Mustang do you currently own? (POLL)

62 Upvotes

Thought it would be interesting to get an indication of what years of classic Mustang are the most popular on the subreddit!


r/classicmustangs • • 13h ago

Drove past the Top Gun house again.

Thumbnail gallery
119 Upvotes

r/classicmustangs • • 18h ago

Wow putting in the rear windshield is a nightmare

Thumbnail
gallery
21 Upvotes

The front one went in just fine. The back with a brand new gasket simply doesn’t go in. If I can get the lip to cling on in on spot I look over and it’s almost an inch away from the surface in another corner. I’m getting sealant everywhere and no progesss

Original glass too….

And yes I did do the trick with the rope inside the gasket


r/classicmustangs • • 21h ago

69 coupe, need help with speakers in the rear deck

3 Upvotes

Hey everyone. Need some help on what exactly the rear deck/tray on a 69 coupe has with speaker compatibility.

I am confused on a couple things, and do not have my car nearby to look, but wanted to finish some Black Friday shopping since the wife said, get it now while it's on sale. :-)

So on Google searches, it says the rear tray does not have 2 standard openings, only 1, and fits 4/10 or 5x7. I see a YouTube video where they are installing two 6x9's, and he said the cutouts were already there.

Soooo, does anyone have a 69 coupe and can help answer what your rear deck/tray looks like and can support speaker size wise, please?

TIA!!!

Reason I can't go check, Vintage AC system in progress at a local friends shop!


r/classicmustangs • • 1d ago

1966 Mustang / Trying to figure out what I have motor wise.

5 Upvotes

I’m working on my 1966 Mustang. I was rebuilding a 302 SBF that’s been bored .30 over however I got impatient and found a deal on a 302 sbf/T5 swap complete for a deal on market place. So I picked it up. So I’ve been slowly identifying what’s been done to the motor without tearing it apart. I’m hoping some of you who know these older small-block Fords can give me some insight into the combination, what kind of power it might make, and anything worth checking or changing. I’ll post some pictures and videos of the motor running. Previous owner of the engine had a machine shop and seemed pretty legit and a respectable old school guy.

Here’s what I’ve confirmed so far (I think)
Block: Ford 302 SBF, .030 over
Pistons: Speed-Pro/TRW L2482 forged flat-top pistons, .030 over confirmed by looking down chamber with borescope and getting part number.
Heads: Older 1965 289 small-chamber cast iron heads, believed to be C5AE castings
Head work: Previous owner stated the heads were ported and fitted with Chevy valves/guides
Rockers: Comp Cams 1.6 roller rockers (in photos)
Camshaft: Flat-tappet cam, but I haven’t identified the specs yet
Intake: Edelbrock Torker single-plane intake (possibly Torker II)
Carburetor: Holley 600 CFM four-barrel
Ignition: Mallory Unilite distributor with MSD Blaster 2 coil
Headers: Long-tube headers unknown brand/ we’re told they were “old school and can’t get them anymore”

Other: Head studs and 7-quart front-sump oil pan / car has head studs, was told rod bolts were ARP but I never popped the oil pan to confirm as me and my son just wanted to get cruising in our car again.

A few things I’m trying to figure out:

With the forged flat-top pistons and early 289 small-chamber heads, what kind of compression ratio could this engine be running?

I know I’d need to verify chamber volume, deck height, and gasket thickness.
Has anyone run ported early 289 heads with Chevy valves on a 302?

I’m curious how well these heads can actually flow and whether they’re worth keeping.

Assuming it has a reasonably aggressive cam, what kind of horsepower would you expect from this combination? I’m not looking for an exact number, just a realistic ballpark.

Is the single-plane Torker intake a decent match for this setup with the T5 and 3.55 gears, or would a dual-plane be better for street driving?

Is there a good way to identify the camshaft or get an idea of its specs while the engine is still in the car?

What else would you inspect to learn more about the internals without completely tearing down the engine?

Any input, especially from anyone who’s built older 289/302 combinations with these heads and pistons, would be appreciated.


r/classicmustangs • • 1d ago

Trunk rust?

Post image
7 Upvotes

I was looking at a 73 Grande the other day that is about 3 hours away from where i live, so i snapped some pics for reference . I was very short on time and didn't give it as close a look as I should've. My question is, does this look like the trunk is rusted out? I looked in the inside, and it appeared it was coated in some type of bed liner and very sloppily done. Unfortunately, I didn't get pics of the inside of the trunk.


r/classicmustangs • • 1d ago

Vapor Trapper

Post image
4 Upvotes

Anyone use one of these before? Are there any other options on the market?


r/classicmustangs • • 2d ago

Black Friday shopping, got me some new stuff!

14 Upvotes

I've wanted to get better headlights, and contemplated the spoiler for a while, and after another post I made, ordered one.

Monday I ordered the spoiler, Holley Retrobright LED low/high beam headlights (outers only) and 5 leaf rear leaf springs. I wanted a rake, so went with 5 vs 4 leafs.

I already have the front coils, saddle perch, rubber bushings and 4 shocks in the garage, slowly building up my pile.

Now the wait to get it all installed!

I love Ky Mustang, I have spent a small fortune there, lol.


r/classicmustangs • • 3d ago

I know one of the holes in blue circle are for the horn, but what are the other holes by this radiator support?

Post image
11 Upvotes

r/classicmustangs • • 4d ago

Cow Rot Replacement

Thumbnail
gallery
69 Upvotes

Finally got round to buying a new lower cowl! (Absolute ball ache to get in the UK without being financially destroyed)

Give it a nice coat of rust Encapsulator, seam sealed and sprayed with bed liner. Hopefully to last another 60 years

Areas of weld were taped off prior to painting so no issues


r/classicmustangs • • 3d ago

Well, that sucks

Thumbnail
gallery
11 Upvotes

I bought the cobra automotive quick release steering wheel hub, and this 6 bolt steering wheel that doesn’t fit.

They’re both 6 bolts, but the listing didn’t list the PCD aka the dimensions of the bolts on the steering wheel.

And how off they are make it so I can’t just modify to fit


r/classicmustangs • • 3d ago

Gas mileage with 351w

7 Upvotes

Just general curiosity, but what kind of gas mileage are people getting out of a 351w? Mine has a mild cam and is in a 66 coupe with a Tremec T5 and an open diff 8 inch with 2.79s.

I know it's not a Prius but I still feel like my mileage is pretty low. I'd like to get a reference for what "normal" should be so I can either investigate further or stop worrying about it.


r/classicmustangs • • 3d ago

Would this bother you guys as well or am I being a perfectionist? I bought a new dash pad and the passenger side is slightly cock eyed.

Thumbnail
gallery
7 Upvotes

I pushed it down a bit bending the sheet metal that it clings onto and it helped a little.

I don’t have the trim on yet but I can tell by applying pressure where the trim goes that by itself it won’t fix it.

It was about $200 from Summit, I didn’t think the $380 “original ford tooling” from NPD was worth it.


r/classicmustangs • • 5d ago

Got her home

Post image
885 Upvotes

I posted a while back about acquiring my dads 67 289 after his passing. Got it back after some time in the shop and wow. I’m really excited to have a classic up and running again (67 Austin healey will be next) and to be apart of a car community again.


r/classicmustangs • • 4d ago

Help with wiring on 67 mustang

Thumbnail gallery
181 Upvotes

r/classicmustangs • • 4d ago

Few pics from today

Thumbnail
gallery
30 Upvotes

Cruised the beach after work today and then drove by the Top Gun house after the gym before heading home. Put 100 miles on the car today too!


r/classicmustangs • • 4d ago

1967 mustang serious steering problem. Any help is appreciated!

Post image
93 Upvotes

So I recently purchased my 1967 Mustang and I love the car but I haven’t even been able to drive it yet. The problem is it’s all over the road so much to the point where it’s dangerous. I can’t go above 10mph without the car trying to pull me in every which way. I do the majority of my own work on everything because I enjoy it but I don’t have the equipment or know how to do an alignment. I took it to a shop hoping it was just in desperate need of an alignment but as I suspected it needs more than an alignment. The shop told me that the power steering control valve ball stud has lots of side to side play and it’s not supposed to move. After getting it home and crawling under it and investigating I see what the shop is referring to but after further research it sounds like this is normal? My question is what is a normal amount of play and If that’s not the cause of this problem what else could it be? Also I’d like to note the power steering is not hooked up one of the lines is completely disconnected could that be contributing? I feel like and idiot for not being able to figure this out any help is appreciated thank you!


r/classicmustangs • • 4d ago

Exhaust setup for '66 GT

7 Upvotes

Hi ya'll, my '66 GT Fastback is absurdly quiet, with a bone stock exhaust setup. When compared to friends or relative's cars it is always the quietest, when I know for a fact the little 289 can be a noise maker.

Any recommendations for a balanced exhaust? I don't want it to be obnoxious, just a bit more noticeable. I'd like to keep the trumpet exhaust tips jutting through the rear valence, though I have seen replicas made for wider pipe diameters

Have a good one


r/classicmustangs • • 5d ago

1967 Mustang POV Ride, Exhaust Sound

Thumbnail
youtu.be
27 Upvotes

r/classicmustangs • • 5d ago

Do Kelsey Hayes 4-piston calipers engage sequentially?

Post image
7 Upvotes

When you press the pedal, do the inner pistons engage first and the outer pistons engage the further you press? Or do all 4 pistons engage at the same time?


r/classicmustangs • • 4d ago

C4 builder choice

2 Upvotes

Good morning,

I am wanting to get a beefier C4 to throw in my 68 as I am building a new engine. I am currently looking at either going with Dynamic Racing Transmissions or there is a Performance Automatic Super Comp for sale near me (used). So I guess I am weighing the price of Dynamic being worth the price. And I cannot find a whole lot of info about Performance Automatic. As in I want to find a spec sheet but everything I find is an AOD or just not the correct company. If anyone has an opinion it would be greatly appreciated.


r/classicmustangs • • 5d ago

65 mustang v8 swap

7 Upvotes

Does anyone know what I’ll need to swap my 200 i6 mustang to a 260 engine. And what should I look for when buying the engine because I found one for 100 bucks but idk what to look for. Thanks


r/classicmustangs • • 6d ago

Fuck me

Post image
21 Upvotes

Battery died and when I tried to jump it the starter relay melted. Hopefully my city is nice with the street sweeper today 🥲


r/classicmustangs • • 6d ago

How much space do you have between the ground and the lowest point of your exhaust, when on level ground?

5 Upvotes

I set up a temporary exhaust system with those flexible pipes to eventually get them professionally done. But the way I did it, the lowest point is only like 3 inches from the ground.

I could spend the time to redo it better, but I don't want to do that since I'm going to pay someone to do them later.


r/classicmustangs • • 6d ago

Distributor Questions

Post image
20 Upvotes

Ive got this distributor, that is hooked up with vaccuum advance. Ive installed a pertronix ignightor2 and flamethrower2 coil.

This distributor has a little oil port, and I was wondering if there was something that was identical that didn't need to be oiled like that on some super regular interval. (Maybe something with ball bearings or something?)

Also, I assume the vacuum advance is totally separate from ignightor2 right? I was told to recurve it to hipo specs... Would that just be installing diff weights and springs?

Finally more of a timing question, if am trying to set base timing, I pull the vaccuum advance from carb, and plug the port on carb... Do I need to actually plug hose to vaccuuum advance as well?

Thanks for any pointers