r/DSP • • 8h ago

Using a dsp on mostly stock settings??

0 Upvotes

With helix next v eight I adjusted the signal management and typed in a few crossovers and I am really enjoying the sound so far… my question is

How much better does it get after using a mic for calibration and is it worth paying 500 bucks to have it professionally done? Looking for real life experience/scenarios and not the “ai” answer please


r/DSP • • 3d ago

Is signal possessing and communications cooked by AI ?

43 Upvotes

I'm considering going into signal processing for my EE masters , especially DSP, radar, and communications. With how quickly AI is advancing, do you think signal processing engineering is at risk of being automated or replaced? Is it still a good field to pursue long-term, or should I be concerned about AI taking over these jobs?


r/DSP • • 2d ago

Need a book. Name = Communication Systems Engineering with GNU Radio: A Hands-on Approach.

Thumbnail reddit.com
2 Upvotes

r/DSP • • 2d ago

Recovering a sentence from a phone accelerometer sampled at 398 Hz by aliasing it on purpose

1 Upvotes

Setup: Android phone, accelerometer at ~398 Hz (Nyquist ~199 Hz). Audio is played through the phone's own speaker, which only shakes the chassis above ~120 Hz (measured with a 20–400 Hz sweep). The sensor has little anti-aliasing, so 285–390 Hz folds cleanly into 10–113 Hz.

Pipeline:

  1. Band-limit speech to 250–1900 Hz
  2. Slow down 16x, to 15.6–119 Hz
  3. Single-sideband shift +269 Hz (Hilbert), to 285–388 Hz
  4. The sensor folds it to 10–113 Hz, mirrored
  5. Receiver: resample the jittery timestamps onto a uniform grid, pick the axis with the best in-band SNR, spectral subtraction using a silent lead-in, conjugate the analytic signal to unmirror, shift back down, speed up 16x

In-band SNR is ~16 dB. Pre-emphasis plus 2:1 companding (the expander driven only by the received envelope) made the pauses silent, but hiss inside the words remains.

Spectrograms, audio and code: https://github.com/pradeeppc/accel-voice-temple-inspired

Question for the sub: how would you push intelligibility further at a ~16 dB in-band SNR? Better noise reduction, or using the direct 120–199 Hz band and the folded band at the same time?


r/DSP • • 3d ago

I’ve open-sourced LiveWDF

12 Upvotes

I've been working on LiveWDF for a while, and I've finally made the repository public.

LiveWDF is a C++ project built around Wave Digital Filters (WDFs), focused on simulating analog audio circuits in real time.

I've been working on the simulation engine, component models, tube models and a lot of the underlying stuff that makes circuit simulation possible.

There's no official release yet. The project is still under development, and there's quite a bit of work to do before it's ready for one.

That's partly why I'm opening it up now. I'd love to get other people involved, whether that's contributing code, testing things, working on circuit models, improving documentation, sharing ideas or just helping figure out where the project should go next.

If you're into C++, electronics, circuit simulation, audio DSP or any of this stuff, come have a look. I'd be happy to have you involved.

GitHub: https://github.com/Yahiake/LiveWDF

Discord: https://discord.gg/8CV9S2zAQ

Let's get this thing to its first release together.


r/DSP • • 5d ago

Is DSP in demand in defense ?

27 Upvotes

Hello,

I want to know if DSP is in demand in defense ? Mostly radar, I’m interested in doing DSP or RF in the future, just want some feedback/ information about the industry in general

I’m a Comp engineering major wanting to get a MS in EE in either DSP or RF


r/DSP • • 6d ago

Built an automated multi-channel HF text network protocol on top of the FT8 engine (up to 384 chars per slot)

Thumbnail reddit.com
1 Upvotes

r/DSP • • 6d ago

PPG 빛으로 읽는 생체신호: 심박수부터 비접촉 측정까지 완전정복 #rPPG #light #biosignal #heartrate ...

Thumbnail
youtube.com
0 Upvotes

r/DSP • • 7d ago

Rebuilding my Signals & Systems & Comms foundation after a 3-year gap for an AI/DSP research path — looking for a non-exam-focused roadmap

Thumbnail reddit.com
11 Upvotes

r/DSP • • 6d ago

ACM Multimedia 2026: TimeCues Studio - a free, open-source tool for annotating music structure [R]

Post image
0 Upvotes

r/DSP • • 8d ago

New guy here, Should i pull the trigger on a DSP and a new Head unit?

Thumbnail reddit.com
0 Upvotes

r/DSP • • 9d ago

Need help with a DSP project

7 Upvotes

Hi, I’m taking a DSP course and I have to do a project worth 15 points. I’ve been searching for ideas and I found this one (Speeding up audio recordings without changing the pitch of the voice). I’m not sure if it’s easy or difficult because I’m really struggling to understand the course. so if you have any advice or resources to help me get started, or even other project ideas. I’d be happy to hear them.

Thank you!


r/DSP • • 9d ago

How will AI affect the industry?

19 Upvotes

I got my undergraduate in EE with a specialization in signal processing in 2024 and have been working outside of engineering for the past two years. I was thinking of returning to signal processing and going to graduate school, but I was wondering if it would be worth it given how much work AI is automating


r/DSP • • 9d ago

Combining Wide-Band Voice Pulse Modeling and Linear Predictive Coding

Thumbnail queuesevenm.wordpress.com
3 Upvotes

r/DSP • • 9d ago

Wavlet verification

6 Upvotes

Are there open source tools which can help verify wavlet arifacts? Analysis is done using wavelib.

Now we must prove by external tool that it works as expected. There are internal checks and verifications all passing; we create signal of various complexities and it works.

Ideas were matlab, scilab, octave but we also have to implement checks.

Customer wants very simple test:

- signal mathematically generated over number of channels - our library must match verification tool within threshold.

Expect some tool with user base so they are sure dumb problems are cleaned up.

So, is there tool which we can utilize to perform the same with minimim user configurable options?

There is good catch, we chose two from wavelib and verify. Other even with small discrepancies will be fixed in support process.


r/DSP • • 9d ago

I implemented the core of JPEG in MATLAB (8×8 DCT + quantization) and built a browser lab to play with Q

5 Upvotes

Individual academic project. Grayscale image, split in 8×8 blocks, DCT per block, divide by a quantization matrix Q and round. Most high-frequency coefficients become zero, and that is where the compression comes from.

Results I measured: with the standard Q, I kept about 41 dB PSNR with about 40% less storage (estimated). Scaling Q from Q/2 to 2Q cut the estimated size by up to 72% while staying above 30 dB PSNR. Note that the size is an estimate based on run-length + Huffman, not a real JPEG file.

The lab re-implements the algorithm in the browser: you can compress your own image, inspect the 64 cosine patterns and see MSE / PSNR change as you move Q.

https://portfolio-iota-gules-ykw61kciwc.vercel.app/projects/jpeg.html

Feedback welcome, especially on how I'm estimating the entropy-coding step.


r/DSP • • 9d ago

Further education for DSP?

9 Upvotes

I have a BS in Applied Math and MS in Statistics and am interested in the field of digital signal processing. Would it be worth it to pursue further engineering qualifications (either a certificate, BS, MS) since I don't have a specific engineering degree? I have the math qualifications down (calculus, linear algebra, complex analysis, diff eqs), but would it be hard to break in/be trusted without specifically anything labeled "engineering"? I know going back to school is not always a popular choice (especially on Reddit), but I will consider if it's something that makes sense and/or gives me more future proof skills against automation/AI. Otherwise, should I just try to get a tangentially related computational role and find a way to get in from there? Thanks in advance.


r/DSP • • 9d ago

Hybrid approach for modeling residual components in audio signals

Thumbnail queuesevenm.wordpress.com
1 Upvotes

r/DSP • • 9d ago

I made a free web tool for Electrical Network Frequency (ENF) audio forensics analysis

0 Upvotes

I don't know if this is even related to this subreddit but I made a cool free tool everybody can use. Whenever you record audio near electrical wiring or plugged-in devices, microphones subtly pick up the 50Hz or 60Hz hum of the local power grid. Because the grid's frequency fluctuates slightly every second, that hum acts like an invisible timestamp and location fingerprint (known as Electrical Network Frequency, or ENF analysis). so typically 50 Hz in Europe/Asia or 60 Hz in North America. here is the web if anyone is interested: https://gridhum-eight.vercel.app


r/DSP • • 9d ago

Advice for Salary Negotiation around a new signal processing role

1 Upvotes

Hiya, not totally sure if this is the right place for this question, so please let me know if I should repost elsewhere.

I am currently working as a junior electronic design engineer, which I went it to as a fresh graduate. My main responsibilities on paper are schematic capture, PCB layouts and testing and I’ve been in it for roughly a year. In this time I’ve volunteered myself for a bunch of both analog and digital signal processing jobs, all of which have been very successful, and management have been very pleased with. For context I’m at an audio tech company, so this has been things like writing and implementing custom reverb, compression etc. algorithms on micros, and also designing different analog circuits for tonal processing (basically just discrete amplifiers that operate just outside of the linear range and have a bunch of filtering baked in). Tests for proving system stability (L1/L2 norm and pole locations etc.) have also been a part of this, along with teaching the other engineers how to do this as it’s a big knowledge gap in the company.

because of this, I’ve been told that they wanna move me into a role that focuses much more heavily on analog and digital signal processing, where I would be the owner of all A/DSP features, and be solely responsible for the design of the algorithms and circuits. Obviously this is a pretty big jump in responsibilities, and will come with a pay rise. However, I do not have any good idea of what to ask for as I can’t find any examples of this online. I’m currently on 32K, and if it helps I’m based in the UK, and only have an undergrad in music tech, so my qualifications don’t really demand a high salary.

Thanks in advance!


r/DSP • • 10d ago

How do I handle the click the right way?

5 Upvotes

If I play a sine wave, I hear a click at the beginning and at the end of the sound.

It seems like the click comes from the sharp start and the end.

I found a fix by resizing the amplitude by sigmoid from 0 amp to the first max value (when sine function hits 1 or -1 for the first time)

Is it a "correct" way of doing that?

I want to be as short as possible, but the first max amp value seems to be the right choice.

I don't know any theory, it just feels right.

I also have a similar problem at the end.

If the wave and at 0 value, I can do the same solution, but what if the value is not 0?

I can trim to the nearest 0 and and do the solution, but it feels like a

crutch and that there is a "right" solution for that.

PS If this is not the right kinda place to ask this type of questions, where should I go?


r/DSP • • 10d ago

How to remove honeycomb pattern present in fiber bundles for imaging in FPGAs?

4 Upvotes

I'm doing a project on endomicroscopes + FPGA and I have a processing core already, but the problem is I built the core with clean images (i.e. postprocessed, this wasn't made by me). Now when I connected the camera + endo system the homeycomb pattern shows up. Are there any standard ways to remove these patterns? Are there any IP that removes these patterns that I don't know? Is there like a mathematical way of doing this that im not smart enough to see?

The preprocessing method already built uses an iterative interpolation process, and if I were to put that into the FPGA's PL side it's going to be too big.


r/DSP • • 11d ago

Commercial Cellular or Defense?

1 Upvotes

I currently work at a national lab as a wireless comms engineering, with a heavy focus on 5G/6G. I enjoy the work, but I’d like to go to a commercial cellular company at some point (e.g., Apple, Qualcomm, etc). However, nothing is guaranteed of course. I’m also not sure about long term prospects in the US, as a lot of commercial RF work can be outsourced to Asia.

I have an offer for a Radar engineering role at a defense startup, but I fear I may be locked out of commercial cellular if I take the role because of how defense focused it is. Radar sounds interesting, and I’m not worried about going back and forth between radar and comms within the defense industry. But transitioning from defense radar to commercial cellular may be tough.

Anybody have any experience in commercial cellular? Is it worth holding out for? Is it worth staying in defense and taking the current offer on the table?

Thanks!

Edit: I wouldn’t mind transitioning to commercial radar as well. Largely just want to transition out of the defense space at some point.