r/Foxbody • • 36m ago

LMR 31-Spline Differential Kit – Will Yukon Bearings Fit an Eaton Detroit Truetrac?

4 Upvotes

Hey everyone,

I'm working on a 5-lug conversion and rear-end upgrade on my 1990 Mustang GT 5.0 with the Ford 8.8 rear end.

I purchased the 31-spline differential kit from LMR that comes with the Yukon limited-slip differential, but my shop recommended switching to an Eaton Detroit Truetrac 31-spline differential instead, mainly because it doesn't use clutch packs that eventually wear out.

My question is: Can I use the carrier bearings and races included in the LMR/Yukon kit with the Eaton Detroit Truetrac, or would I need to purchase a different set of bearings?

Has anyone made this swap or installed a Truetrac using the bearings supplied with the LMR 31-spline kit?

I'd rather avoid purchasing another set of bearings if the ones I already have are compatible.

Any firsthand experience or advice would be appreciated. Thanks!


r/Foxbody • • 17h ago

85 LX NOTCH

Thumbnail gallery
76 Upvotes

$15,000 or trade for something interesting.
Build sheet in pictures.

Lapeer Michigan 48446


r/Foxbody • • 4h ago

LMR Black Friday Deals on steering wheels?! Help a girl out.

5 Upvotes

Delete if not allowed but my husband wants a new steering wheel for his fox for Christmas and it’s currently $410 on LMR. I was hoping to take advantage of a Black Friday/cyber Monday sale or discount codes but not sure if they run promotions on steering wheels or possibly offer something site wide? Anyone know?

I’ve found the steering wheel on other websites but I assume he needs the hub adapter since the link he sent includes that in the description.

Really just want to see if I should wait for cyber Monday vs Black Friday or if this is something they won’t typically have a deal on and should just buy it now (or if I should look elsewhere)?

Item: 1984-04 MUSTANG FORD PERFORMANCE SPARCO STEERING WHEEL

Thanks in advance!


r/Foxbody • • 14m ago

Buying a foxbody that need and engine and trans.

2 Upvotes

What should I budget for a 302 and t5? Wanting about 400-500 hp but that’s negotiable!


r/Foxbody • • 20h ago

Ask Thinking about buying a foxbody roller with( roll cage and 5k in suspension parts installed. The suspension is adjustable.

5 Upvotes

Is it really as easy as putting another 302 and a new transmission in? Roller is 1500$ and I’d like to build a 302 mated to a manual transmission also how much should I expect to spend. Car has no rust and when it had the engine and transmission in it, it ran something like a 4 second 1/8th mile.
Car is rust free and comes with an aftermarket ecu system or tuning system. It also has the 302 k members and a QA1 suspension.
this is a repost the car also has weld rims and slick tires


r/Foxbody • • 23h ago

Ford C4 transmission (bar?)

Post image
8 Upvotes

r/Foxbody • • 1d ago

ASC McLaren Mustang

Post image
158 Upvotes

r/Foxbody • • 1d ago

Serious Buyer Looking for a Drivable project

0 Upvotes

I am in the Chicago area and I am looking for a 1985 - 1993, 302, 3 pedal, hardtop. My budget for the car itself is up to $10000ish with some room for the right car. Show me what you got. DM me if you are serious about selling. Modifications do not add value for me. I am not against them but am not interested in a car that has been heavily molested. Thanks.


r/Foxbody • • 1d ago

Ask Cylinder head smog holes

Post image
6 Upvotes

What’s the best way to clean these smog hole threads? Purchased the inserts as I’m deleting the smug pump but the carbon buildup is so bad I can only get it like 2/3 threads before they come to a complete stop? *Pic is for attention not of the actual threads on my car*


r/Foxbody • • 2d ago

Prepping my new FR manual rack for install

Thumbnail gallery
26 Upvotes

Took the wheel wells off and see some rust I'm treating and going to paint prior to putting everything back together. Getting the old rack off wasn't bad at all, those wheel wells were more of a pain. The reducing sleeves were a bitch to get out of the k-member and old rack but are in good shape and I'm reusing them and the bolts. Renewed the 15/16 sway bar with fresh paint / new bushings.


r/Foxbody • • 3d ago

Ask Timing issue? 2 videos attached

17 Upvotes

Hey guys so I have a 1989 mustang gt with j303 aluminum heads trick flow streetburner upper and lower intake ford x letter cam with comp cams 1.6 roller rockers and e7ze pistons I have my timing set to about 12 degrees with the spouts connector out and I’m having an issue with it popping out of the intake randomly revving up and wanting to die and then turning over and not starting once the motor is warm I’ve tried running it with maf unplugged and iac unplugged as well as cleaning the maf and iac and the issue persists it doesn’t pop out of the intake with the timing advanced a good amount but still will randomly rev up and won’t start back up once warm unless I retard the timing a bunch I’ve heard maybe it could be the tfi module but also heard that they either work or don’t kind of banging my head against a wall at this point with trying to figure it out😂


r/Foxbody • • 4d ago

New interior parts for the calypso green coupe project.

Thumbnail gallery
282 Upvotes

I have a bunch of interior parts going into the Calypso Green coupe, plus more that have color-matched stitching; I am really looking forward to installing them.


r/Foxbody • • 3d ago

Hot start problems

3 Upvotes

I have an 87 notch back. I’ve owned for 23 years. I lost count of how many motors and transmissions and work. I’ve done this thing. My current motor has lasted me the longest at about 10 years, finally found an engine, builder and knew what he was doing. Also had tuning issues before, finally went to Holly EFI. But ever since the new motor, I’ve had this hot start issue. Car starts fine when it’s cold as soon as it gets up to operating temperature will you go for a small drive? It gets very hard to crank over. built 331 with 10 to one compression. 10 years ago. No one knew what it was or how to fix it so I’ve just dealt with it, wondering if any one has had a problem like this. Obviously, I’ve checked all the normal things getting a bigger cold, cranking amp, battery, checking on the grounds and all the wire connections. And I have a high torque starter.


r/Foxbody • • 4d ago

Officially Ford Licensed 5.0Resto Headlights Are Back!

Thumbnail gallery
298 Upvotes

For those who have been awaiting our 5.0Resto headlights to come back into stock, the time is now!


r/Foxbody • • 3d ago

Off road dream build

Post image
45 Upvotes

Just having fun. 🤙🏼


r/Foxbody • • 3d ago

Ask Why do people carb the 5.0 in the 1990 and later fox body

30 Upvotes

I’ve been watching the Fox Body market specifically the 87 through 93 run of it and I’ve seen people who carb the engine and take out the fuel injection why is that? Is it a sound or power thing?


r/Foxbody • • 4d ago

September of 1988.

Post image
88 Upvotes

r/Foxbody • • 3d ago

Foxbody or C5

4 Upvotes

Fully aware that this will be a biased opinion. But have been in the market for either a fox body or a C5.

Budget is around 16k

Mainly, looking for a weekend car short road trip 2 /3 hours max

Anything to look out for when looking at them?

Also fully aware that all this has been asked 1 million times, but would like to hear it from everyone’s opinion.

I have test driven a few Fox bodies, but I haven’t pulled the trigger. One was carbed and one bone stock but rusted to hell under truck bed liner. Don’t want a full blow rebuild

Have built a few Hondas, so this will be my first V8 car, regardless, semi mechanically inclined.

Live in Nc and went to foxtober fest and really liked the platform. Also open if anything is FS

Have not had a chance to drive a C5


r/Foxbody • • 3d ago

Ask What mods should I do

3 Upvotes

Sorry for the back to back but I’m probably going to be getting a 2.3 lt automatic fox body due to budget restrictions which I don’t mind I’m looking at ones from 87 to 93 what mods would just be fun but not ruin the daily drivability of the car and increase hp I don’t know how to drive manual but if do get one I’d let yall know


r/Foxbody • • 5d ago

B303 cam in stock engine?

Post image
208 Upvotes

Hey I just got an 87 lx that needs a new engine found one close to me and a good deal as well as a b303 cam, new in box for a good price. Can I run this cam in my stock engine? Budget is tight and I love the sound of that cam. In the future I’d like to get new heads and intake to go along with it but other things are needed first.


r/Foxbody • • 5d ago

Saleen Ford Mustang in La Jolla

Post image
252 Upvotes

r/Foxbody • • 5d ago

Does this sound right? 347 aluminum heads with roller rockers.

18 Upvotes

r/Foxbody • • 5d ago

Fuel Leak

6 Upvotes

Hello, I have a fuel leak from the rubber fuel line coming out of my fuel filter.

Can I replace the rubber hose with a matching size high pressure fuel injection hose from autozone and use the appropriate size fuel injection style clamps? Or do I need to buy the specific stock style one off LMR with the factory ends?

I plan on replacing the fuel filter while I’m in there. Thank you for any input or help


r/Foxbody • • 5d ago

Key will not turn

12 Upvotes

Just bought an 87 mustang lx and no matter what we do the key won’t turn. It’s the right key and worked months ago both me and the original owner can’t get the steering wheel to unlock is there some sort of trick or button to push to unlock this wheel?