r/Irrigation • • 19h ago

1960’s Rain Bird Rotor: not an impact, gear, ball, or cam drive

30 Upvotes

r/Irrigation • • 2h ago

Seeking Pro Advice Hunter rain sensor always set

Thumbnail
gallery
1 Upvotes

I moved into a new house and noticed the rain sensor is always active. Originally it looks like the sensor wires were incorrectly installed with blue to SEN and white to SEN2. I moved the white to COM, but still can't get the sensor to be inactive. It's not raining over here so I'm very confused.


r/Irrigation • • 11h ago

Master Valve install w/o wire to Rainbird

4 Upvotes

I have an irrigation system connected to a Rain Bird system. I saw a stream of water in the back driveway and a very wet area in the front yard. I figure there was a leak and turned off the valve to the irrigation system. Apparently I don't have a master valve and there's no wire to the "MV" on the Rain Bird.

I assume running a wire from the front sidewalk to the garage in the back of the house will be $$$. Appreciate alternative options that will give me the benefits of a MV. Is there a valve system that I can locally program or WiFi/App to match the Rain Bird schedule(s)?

TIA.


r/Irrigation • • 10h ago

Seeking Pro Advice MP rotator alternatives

2 Upvotes

Sorry if this is a re-occurring topic.

I currently have a system with a bunch of Hunter MP rotators and personally I can’t stand them. They’re continuously clogging up, stop rotating and have terrible spread (especially close to the sprinkler itself)

What’s the alternative? Ideally something I can just unscrew and screw in the replacement rather than having to dig them all up (if that’s even possible) happy to try any brand.

For context, I’m on bore water which is practically just river water it’s that shallow. So I’m not concerned about water usage, I also have a solar system so not worried about run times. The area that I use these types of sprinkler heads is about 2.5-3m across in terms of throwing distance.

Actually also while I’m going. I wouldn’t mind lifting these sprinklers a little. What’s the best way to do that? Is there some kind of adapter for this?

Thanks!


r/Irrigation • • 15h ago

Seeking Pro Advice Need to know

Post image
4 Upvotes

Am I doing too much or is this just right?


r/Irrigation • • 1d ago

What Were They Thinking?! I got the cops called on me

56 Upvotes

I was very ahead and showed up to my 4 o'clock at around 1:30 to winterize their system. I didn't expect them to be home, but you never know with so many people working from home. We haven't winterized their system before, but have serviced it plenty of times. All I can say in one word is that this house has more fittings than poly due to the poly going brittle.

So I show up, wait about 15 minutes because I'm so early. Get out of my van and go look for his backflow. Idk how other states are, but usually backflows are on the opposite side of the garage. This clients house was a rectangle with the garage in the back. So, I walk down the right side, dont see anything. Walk down the left side and check behind the A/C just in case and don't see anything. Finally, I spot the sneaky little febco behind some plants on the front right corner. So, I bring out my hose, turn on the first test port and go ring the doorbell. No answer. Knock on the door, dog starts barking, but no answer. So I return to my van.

I play some games on my phone for about 20 minutes because, once again, I'm super early and dont want to call him and make him rush home. Whilst on my phone I see a cop coming down and dont think much about it until he pulls right beside me, so I roll down my window. He's asks if I have a Hispanic working with me and I tell him no. He said a Hispanic walking around in his lawn and caught him on camera . I told him I walk around his lawn . No issue at all with the cop. It matched my description perfectly, black hat, black sweatshirt, but I'm white. He asked if I'm supposed to be here and I said I was, he schedule it.

10 minutes pass and the cop flying down the street and stops closer to my car. He said he talked to the resident and said I was looking in his windows. I told him I was looking for his backflow, which he said he doesnt know what that is. I told him it's where my hose is attached to behind those plants. The cop told me he doesn't know much about that, made small talk about how busy we must be this time of year, asked for ID so he'd have a name to give when he talks to me next and said the resident is 30 minutes away.

I then get a call from my boss saying thay the resident called into the shop saying that basically I was looking into his windows, extremely angry. My boss had no knowledge of anything and I told him he called the cops on me. My boss said he told him i was trying to find the backflow and the resident told my boss thats a pathetic excuse and that he doesn't ever want me on his property ever again because he doesn't feel safe.


r/Irrigation • • 23h ago

Is this for Draining (winterization)?

Thumbnail gallery
1 Upvotes

r/Irrigation • • 1d ago

Seeking Pro Advice Home irrigation controller recommendations?

1 Upvotes

I'm setting up 4 raised beds that will use automated drip irrigation. I want to set up each bed as a separate zone so I can tune how much water I'm putting into each bed. I think that the water line coming from the house is 1" PVC (will confirm before buying anything).

I've previously used an Orbit 56545 4 port hose timer, but it only lasted a year or so and I'm looking for something more permanent.

I plan to extend the PVC line out to the garden and hope to have the controller and valves in a ground box near the garden.

Features I'm looking for:

  • Battery powered (preferably with a small solar panel to keep it charged since I don't have power out in the garden)
  • Straightforward to program
  • NOT Internet connected
  • Inline with the PVC pipes, so I don't need to work with threading hoses.

When I look online, there's WAAAY TOO MANY choices and too many of them are a 'smart' system that needs a network connection and a web interface or is AI enhanced or whatever. I just want a straightforward solution that I can expect to last a few years.

Thanks for your help and advice!


r/Irrigation • • 1d ago

Seeking Pro Advice PVC pipe.

1 Upvotes

I’m laying 700 ft of 1” pvc for planting trees. I’m using class 200 and wanted to use snap fit tees. Goor or bad idea? I’m laying pipe first then planting trees.


r/Irrigation • • 2d ago

Connecting water butts and other rain water storage

Thumbnail reddit.com
1 Upvotes

r/Irrigation • • 2d ago

Seeking Pro Advice Idea for an Automated Sprinkler Winterization System - Looking for Feedback

Thumbnail reddit.com
0 Upvotes

r/Irrigation • • 2d ago

Warm Climate Trying to make a raised bed/rain harvesting combo. Need as much advice as I can get!

Thumbnail
gallery
1 Upvotes

Hey folks! So i have this overhang on my (well, my parents) patio, the pavers extend beyond the concrete patio and I want to

1. stop the pavers from getting worn down by the rain (they are already getting impact dips and lifting, theyve only been there for a few years)

2. Harvest the rain so it can actually be used for the garden, and work with the crazy deluges we get here

3. make it look presentable

The images attached are my current idea. An L-shaped bed around the corner of my patio roof with an inner, elevated rain barrel of sorts. I could make it a full square as well, ive got some irrigation lines in that area already that might as well be put to use, if i have need of them.

I was thinking I could make the "barrel" L-shaped too, hold more water that way, look nice, more even watering into the bed as well. but im in the desert (zone 9a) and i think that having an open top on it (with mesh) might cause too much evaporation. Maybe i can put in sort of a funnel-shape in the areas where rain comes over the roof the most and put mesh over that instead of making it an open top with mesh all over? I could probably find some terracotta shapes to do that fairly easily, and that way it still looks nice... (pic 3)

I have already turned my backyard into a rain garden, i love the work that comes with it and i mean i LOVE. the work. im actually putting in a proposal at work to allow us to establish a rain garden there. Im not really sure where to get started with this, though, and id like to get started soon before i put in seedlings for the year and prep for winter when our next rainy season occurs.

what materials do i need? How do i make sure that the inner barrel is waterproofed and can properly do a slow drip into the bed? When we get rain its usually massive storms that roll over us and then disappear.


r/Irrigation • • 2d ago

Okay, which one?

Post image
1 Upvotes

Of yalls apprentices decided they were gonna moonloght and thought they knew it all?

How long did it take for your best guy's head to get to big?


r/Irrigation • • 3d ago

Seeking Pro Advice I too am here for first time blowout advice, apologies in advance for another newbie ask!

Thumbnail
gallery
3 Upvotes

I’ve looked at the other posts but was looking for clarification. Connect compressor south of the back flow preventer, at this connection point correct?


r/Irrigation • • 3d ago

Seeking Pro Advice I (gardener) fucked up

Thumbnail
gallery
10 Upvotes

I am a gardner and used a sod cutter to remove a section of grass yesterday. The client marked the irrigation heads with flags but did not mark this one unfortunately and I didn’t see it. The water still comes out but obviously it’s missing the head. Before I talk about this with the client I’d love to know what y’all think the protocol is to fixing this. Please tell me it will be an easy fix for their irrigation people.


r/Irrigation • • 3d ago

Where would you put shutoff valve and drain?

Thumbnail
gallery
5 Upvotes

Point A is where my irrigation splits off the main water supply and heads toward the back flow preventer. Point B is where it transitions from PVC to copper. Where would you put the shut off valve? Where would you put a drain valve?


r/Irrigation • • 3d ago

Replacement for lawn genie Jartop diaphragm?

4 Upvotes

Anyone have a source or know of equivalent to replace Lawn Genie jar top sprinkler valve diaphragm?

I found out Lawn Genie no longer exists when I tried to buy one, and have not been able to find a compatible part. Not off-brand, not from Toro, which apparently acquired Lawn Genie, or anything else!

old part number was L13100, if that helps it shows up in searches, but all sources say Unavailable

I’d rather not have to replace the valve unit for lack of a diaphragm to stop a leak!


r/Irrigation • • 3d ago

Seeking Pro Advice Sprinkler setup check for first time blowout

Post image
2 Upvotes

Hi,
First time doing a blow out- just want to make sure I got it right.
The red valve is the water supply. Was shut off right before I take the picture.
The air should be connected to the grey pipe right? Believe was garden hose size.
The green valve in the middle should be the backflow valve? , which means it should be shut during the blow out but be opened after.
Thank you!


r/Irrigation • • 3d ago

How far away from the well can you install a shallow well pump?

Thumbnail
gallery
3 Upvotes

I'm working out where to put a shallow well pump for a few sprinkler zones. The spot I'd prefer for the equipment isn't right beside the well, so there would be a horizontal run of suction pipe between them.

I know vertical lift matters, but I'm less clear on how much that horizontal run changes things. Is keeping the pump close to the well worth rearranging the equipment area for?

Before choosing a spot, what should I measure besides the horizontal distance and vertical lift? I'd include the planned suction pipe size too, but I'm not sure what else someone would need to judge the layout.


r/Irrigation • • 4d ago

Seeking Pro Advice Is $835 a fair price to replace irrigation supply line and backflow preventer?

Post image
14 Upvotes

I'm looking to hire an irrigation company to replace the main supply line coming out of my house with copper and replace my existing 15 year-old backflow preventer.

I received the attached quote for $835 ($475 for the copper supply line and $360 for a new Wilkins PVB backflow preventer). Includes labor, materials, and a 2-year warranty.

Does this seem like a reasonable price for the work? Would you replace both components or just repair/reconnect the existing setup?

Located in Northeast Ohio. Appreciate any input!

And yes, I realize half of Reddit will tell me this is a $10 DIY job that takes 15 minutes. 😂


r/Irrigation • • 4d ago

What was this fitting?

Thumbnail
gallery
2 Upvotes

What is this rusted fitting? It’s before my backflow preventer.


r/Irrigation • • 4d ago

Need help

Post image
2 Upvotes

I tried to turn my irrigation system off and thought I had it, but then this morning I woke up to a soaking wet driveway. I noticed this irrigation shutoff valve coming out of a riser pipe was filled with water. I tried vacuuming it out, but it refills slowly. Can anybody help me identify the issue? Did I turn it off all the way? Sorry, it is dark outside. This was as clear a photo as I could get


r/Irrigation • • 5d ago

Check before reaching

Post image
34 Upvotes