r/meshtastic • • 6h ago

Hostility towards the other mesh

24 Upvotes

What is going on with the other mesh? Why the hostility?


r/meshtastic • • 21h ago

self-promotion I built a free browser tool for planning mesh links on real terrain (Fresnel zones, coverage maps, peak finder)

19 Upvotes

Hey all. I've been working on a side project called Airendil (https://tools.airendil.com) and figured this crowd might get some use out of it.

You drop nodes on a map and it pulls real elevation data to tell you whether each link will actually work. No install, and you don't need an account to use it.

What it does (all free):
Terrain profiles for every link, with line of sight, the first Fresnel zone and earth curvature drawn in, so you can see exactly which ridge is in the way

CLEAR / PARTIAL / BLOCKED grading per link, plus a full link budget (TX power, antenna gain, cable loss, RX sensitivity) with margin in both directions

Coverage heat maps for each node, shadowed by terrain
Propagation models from plain free-space to terrain diffraction (ITU-R P.526) and Okumura–Hata

A peak finder that searches around a point for prominent summits, handy for scouting repeater spots
KML/KMZ/CSV import and export, plus PDF reports
Defaults suit LoRa (900 MHz band, 2 m antennas), but you can set any frequency.

There's an optional premium tier for the heavier stuff: buildings and trees on the link profiles, vegetation loss, finer coverage maps, a few extra models and share links. The core planning tools are free with no trial limits.
The docs (https://docs.airendil.com) also have tutorials on Fresnel zones and diffraction, including an interactive knife-edge diffraction demo where you can watch the wave bend over an obstacle.

I'd really like feedback from people planning real meshes: what's confusing, what's missing, what's wrong. There's a bug report button in the app, or just reply here.


r/meshtastic • • 1d ago

build Node on the local VFW.

Thumbnail
gallery
175 Upvotes

Just finished installing a t096 based solar node on the roof of my VFW Post. Designed, printed, and built the whole thing more less myself. Install needed to be non permanent to the building, so I went with 20+ feet of stainless steel hose clamp 😂. It needed a relatively narrow lip on top to avoid the hump of the concrete plug that seals the original top, but most of the work keeping it in place is being done by the hose clamps and rubber pads on the back. Admittedly it remains to be seen how this holds up, but it felt pretty solid in the moment.

The node is built around a T096, 2w solar panel from voltaic systems, and adafruit charge controller, and a 5000mah battery pack. The 3d printed enclosure was coated in brownells alumihyde paint followed by a coating of gorilla glue waterproofing spray coating. The panel is epoxied in place with JB marine weld, and there's a breathing valve on the backside with a desiccant pack on the inside.

Now we see how it holds up over the winter.

For those looking for locations to set up infrastructure nodes I'd encourage y'all to check out your local veterans organizations. Many have buildings, most have a public/community service mission. If their buildings are in advantageous locations, try and reach out to them. Granted I'm the chaplain for my post so I already had an in, but it took basically no effort to talk the posts leadership into approving the node.


r/meshtastic • • 23h ago

build ESP32 Round Plastic Case

5 Upvotes

Have any of you used the clear round plastic case that comes with Seeed ESP32 boards to make a node?


r/meshtastic • • 19h ago

build Just wondering about the state of people attempting to create large area repeaters.

1 Upvotes

As many have said on Reddit, this is probably the wrong place for this question.

I have looked at the maps and the two areas I most wish to be able to contact across just don't have coverage. Elevation changes and a lack of communities in the in between of the cities leaves me without a reasonable mesh.

It keeps me thinking about ideas like trying to find school programs that could be used as a part of creating more users or offering a place to install a repeater for community use.

I'm also wondering if there's any chance of calling up the Lamar sign company to find out if we could attach some of the solar powered ones onto the roadside signs.

Larger scale repeaters would be fantastic in these big empty areas.

I talked to a few people in a couple of schools around here and could probably convince somebody to at least let me put one on the rooftop but I don't know if meshtastic is actually a good thing to push for students. Maybe at the college level but probably not at the high school level. I think it would just open up an even more private method for bad performers on the network. I'm just thinking back to the '90s and how the dude with the pager was usually the guy that was selling weed in high school and then I think about the idea of a whole bunch of students having cheap mesh devices where they can vary privately communicate sales.

I got a little off topic there. The point is that while all the mesh devices are awesome and I hope that we continue to get better and better pre-built options, I'm also hoping that we can find some easier ways to put up repeater nodes. I would be perfectly happy to put one on my house but I've done the math and checked the map and putting it on my own house doesn't really add to a mesh that already seems to be pretty concentrated in my area.

I thought about trying to put something together with a tall magnetic antenna on my van's rooftop just so I had a better signal from wherever I happen to be working on a 10-ft antenna is probably the most I could do and isn't that much of an improvement, at least not when I'm driving around to my different job sites and the mesh maps show big clusters in each area but nothing in between.

I might be missing something but I also haven't seen much in the way of online conversion. I know the whole point is to be offline and off the tower but while we spread the mesh it would be nice if I could have a handful of devices that are just attached to The internet and if one of them receives a message it can do the burst on all the other ones at the same time. Maybe it exists or maybe I'm thinking incorrectly about how the whole program works. it's just that even within a single county I have four or five separate pockets of mesh coverage according to the maps I've seen but almost nothing in between


r/meshtastic • • 1d ago

build 😂 my balcony

Post image
63 Upvotes

My


r/meshtastic • • 1d ago

Is this okay??

2 Upvotes

r/meshtastic • • 1d ago

Disappointed with signal - roof node not great - user error?

11 Upvotes

I'm in a suburb of NYC, 3 miles away from Manhattan. If I walk up the road 200ft I can reach the top of a hill and see the skyline. I have a T-deck and a few other devices that receive plenty of messages from NYC, Brooklyn, Jersey City, and more. The problem is that when I transmit on my devices, I typically can't reach the mesh.

I purchased an 8dbi antenna from Rokland and put it in my attic to try and help things along. I added a heltec4 and set it for client_base. I then set favorites in both the Heltec and tdeck. EDIT: Tdeck is set to client_mute.

If I log into the Heltec (with tdeck turned off) and send messages, I can typically hit the mesh 95% of the time. When I turn the tdeck on, I sometimes receive messages on the tdeck but not on the Heltec, or vice versa.

My disappointment is that the roof node is still missing messages that the tdeck receives. I'm also frustrated that when the roof node receives a message that the TDeck doesn't get, it's not re-transmitting to the tdeck. I thought the whole point of client_base and favorites is that they're supposed to retransmit with no hop losses to devices on the favorites list.

What am I doing wrong here?

Edit:
I have the node connected directly to the antenna with an IPEX to N 4" pigtail.


r/meshtastic • • 1d ago

Sales

6 Upvotes

Anyone seeing any good sales this holiday season on hardware? Kinda new to this and want to set up a few repeaters as there are none in my area.


r/meshtastic • • 1d ago

Multi-Channel Nodes?

2 Upvotes

I‘m very new to Meshtastic so please feel free to correct me.

Do/why don’t nodes exist that can run multi-channel comms, like how LoRaWAN Concentrators work? Meshtastic could stay single-band, but the node could also handle LoRaWAN sensors for environmental data gathering.

Asking as a LoRaWAN enthusiast trying to get into Meshtastic with some hardware & sensors lying around!


r/meshtastic • • 2d ago

Is this safe for my board?

Post image
4 Upvotes

r/meshtastic • • 2d ago

vendor Heltec MeshPocket V2: Pocket a Node. Pack the Power.

Thumbnail
youtu.be
53 Upvotes

Heltec MeshPocket V2 combines LoRa mesh communication with a 10,000mAh Qi2 magnetic wireless power bank, bringing portable connectivity and everyday charging into one compact device.

Compared with the previous generation, V2 features a stronger magnetic attachment, USB-C firmware flashing and data access, built-in GNSS, a foldable LoRa antenna, and an upgraded color TFT display with four-button controls. The new design is also slimmer at just 13.9mm and weighs approximately 193g.

Key Specifications:

- LoRa: SX1262

- Bluetooth: nRF52840

- Battery: 10,000mAh (3.85V)

- Wireless Charging: Qi2, up to 15W

- Dimensions: 104.5 × 74 × 13.9mm

- Weight: Approx. 193g

Designed for portable mesh networking, outdoor exploration, and off-grid communication, MeshPocket V2 brings power and connectivity together in a single device.

Pre-order & Early-Bird Pricing

The first batch of MeshPocket V2 is currently being shipped from China to our warehouses in the United States and Europe. Regular sales will begin once the inventory arrives at our regional warehouses.

In the meantime, we're offering an early-bird discount during the pre-sale period.

Early Bird Discount Code: MESHPOCKETV2ISHERE

To redeem your code, go to My Account → Redemption Code on our website.

Learn more about MeshPocket V2 and secure your early-bird offer!

Heltec MeshPocket V2 – More Than a Power Bank.


r/meshtastic • • 2d ago

build Can someone please help me

Post image
30 Upvotes

I purchased this and I flashed it like I was told to do to update it and after I flashed it the screen doesn't show anymore it's just illuminated black. I literally just got it 30 minutes ago and I'm kind of at a loss at the moment and don't know what to do


r/meshtastic • • 2d ago

Meshtastic Isn’t Limited to 7 Hops (Here’s the Trick)

Thumbnail
youtu.be
30 Upvotes

r/meshtastic • • 1d ago

Nrf52840

Post image
0 Upvotes

Has anyone tried these


r/meshtastic • • 2d ago

Messaging morse?

0 Upvotes

Why isn't there an option to message via morse code? It would be extremely useful for small devices if you had an extra button you could use to encode message. Something like the Lilygo T Deck would remain an attractive option towards casual users who would like a keyboard while smaller nodes can be used as a standalone device during emergencies. I am aware canned messages may be configured to be used incase your phone is out of commission but would it be that difficult to add a morse texting option?


r/meshtastic • • 3d ago

self-promotion My 1000th mesh node

Post image
989 Upvotes

This might sound crazy, but I just made my 1000th Zyn mesh node.

Let me talk for a second about this design and why I settled on it. I have a lot of friends who think the idea of an off gird, encrypted texting radio in an empty Zyn can neat, but few who know how to solder, 3D print, flash Meshtastic firmware, etc. One could say that they should learn how, but we all have our interests and our strengths. For this reason, the core principle I designed around was ease of use and assembly.

Because I designed around ease of use and assembly, I quickly got broad appeal amongst my friends who use Zyn and on my Instagram account where I posted about my project, and that is what led to making 1,000 of these nodes.

I've learned that few non-tinkerers are willing to create a bill of materials from scratch or design inserts and enclosures, but those of us who do enjoy such things have an opportunity to guide people towards neat technology like Meshtastic by lowering barriers to entry and increasing intrigue.

Full disclosure - I do sell these. It took me two years to get to a point where I could make a living (barely) off of doing something "creative", but the journey has been incredible. Now, I'm not here to try to convince you to buy one of these, but rather I want to use these nodes as an illustration of what is possible based on design choices.

-Sam


r/meshtastic • • 2d ago

Best meshtastic device for my daughter

8 Upvotes

I'm using a uConsole which is overkill. Just got a Heltec V3, which is... fine I guess. i understand it; it's connected to my phone and it works. Battery charging is weird. My laptop won't charge it for some reason and the USB C port is tiny so I had to shave a mm off the connector housing to get it to plug in. Anyway, I want something super simple for my daughter to be able to use. Just set it up with a private channel and have it work for her. Would the LilyGo device that looks like an old BlackBerry do the job do you think?


r/meshtastic • • 2d ago

Questions about meshtastic app

6 Upvotes

If this is the wrong group lmk

I’m new but learning more everyday. Please be kind ✌🏼

  1. What does the identification of locked and unlocked for? Green or yellow padlock
  2. What does tracker mean? Vs client etc
  3. How does the key work if I want to message someone directly?
  4. How do I connect with the QR code to be invited to a channel?

I successfully sent and received a message. Now I need to learn more specific settings and what not in order to be secure.

Thanks


r/meshtastic • • 2d ago

Range issues

7 Upvotes

I’m very new to this and still trying to figure out how it all works but I recently purchased two Heltec V3’s, upgraded the antennas on both (Muzi Works) but can’t seem to get much range.
I placed mine in a second story window at the front of our house, my partner drove to a supermarket approximately 1 mile away and stood in the parking lot but none of our messages would go through on our private channel.
No huge buildings or anything like that in the way.
I know it’s set up correctly because I’ve walked to the end of our block and our messages have gone through just fine.
Is it unreasonable to expect this to work over a one mile range?

One more question while I’m here. I’m in northern Illinois but on the Meshtastic app I can see nodes in Alabama and Pennsylvania, without seeing a trail of nodes in between. What’s that about? I thought this was a short range thing that you can extend only by using other nodes to get distance?


r/meshtastic • • 3d ago

One Year Milestone

Thumbnail
gallery
87 Upvotes

Cools to see my first solar node has been up for over a year.

With today's technology blackout and technical issues, glad we have the ability to use other means of communication, not reliant on corporate giants.

Stay safe out there guys!


r/meshtastic • • 3d ago

build Swim meet event number display

Thumbnail
gallery
152 Upvotes

Built this for away meets where our team is waiting in a room not by the pool deck- parent or coach on the pool deck sends updates to the display to show what event is current so kids can line up. Works incredibly well indoors, through metal doors and around several corners. These are both v1 and I’m changing a lot for v2.


r/meshtastic • • 2d ago

Canadians: the ham Basic licence is easier than it looks, and here's a free way to study

0 Upvotes

r/meshtastic • • 3d ago

build Handheld meshtastic+++

8 Upvotes

Hey guys, I’m building a Meshtastic handheld device and I’m looking for an ESP32-based board with a built-in display, 16 MB of RAM and 8 MB of PSRAM. Do you have any recommendations?