Hi everyone,
I've been trying to install Windows on my PC for hours, but I'm completely stuck. I would really appreciate some help.
Current PC specifications:
\- Motherboard: ASRock A520M-ITX/ac
\- CPU: AMD Ryzen 7 5700G (using integrated graphics)
\- GPU: No dedicated GPU installed
\- RAM: 16GB Corsair Vengeance DDR4
\- SSD: SP CCM.2 PCIe NVMe SSD, 1TB
The problem:
The BIOS detects my NVMe SSD correctly and displays it as "SP CCM.2 PCIe SSD" with a capacity of 1024GB.
However, after installing Windows, the motherboard does not show Windows Boot Manager in the boot options. The only boot option I can see is my Kingston USB installer.
Windows Setup starts normally and installs Windows up to around 80%. The PC then restarts, but it never boots into Windows. Instead, it either returns to the Windows installation USB or displays "Reboot and Select Proper Boot Device" when I remove the USB.
What I've already tried:
\- Completely wiped the SSD using DiskPart ("clean").
\- Tried converting the disk to GPT ("convert gpt").
\- Reinstalled Windows multiple times using the USB installer.
\- Disabled CSM in the BIOS to force UEFI mode.
\- Checked that the NVMe SSD is detected in BIOS.
\- Checked the boot priority: only the Kingston USB appears. Windows Boot Manager is missing.
\- Checked the partitions using DiskPart. Windows Setup showed a 200MB FAT32 EFI/System partition, a 16MB Reserved partition and a large primary partition.
\- "mbr2gpt /validate /disk:1" returned: "Disk layout validation failed for disk 1".
One strange detail:
When I run "detail disk" in DiskPart, the SSD is identified as:
"Microsoft Storage Space Device"
It also shows the disk as dynamic. In "list disk", the Dyn column has an asterisk, while the GPT column does not.
I don't know why Windows identifies my NVMe SSD as a Microsoft Storage Space Device.
My questions:
- Why does the BIOS detect the NVMe SSD but never show Windows Boot Manager?
- Could the "Microsoft Storage Space Device" identification or dynamic disk status be causing this?
- Is this a known issue with the ASRock A520M-ITX/ac?
- Is there a way to fix the UEFI bootloader without reinstalling Windows again?
I'm getting really frustrated after multiple installation attempts, so I'd appreciate any suggestions before I try wiping or reinstalling anything else.
Thanks in advance!