r/AUG • u/ARID_DEV • 13h ago
r/AUG • • Dec 21 '25
Oops Safety Announcement: Do not use the SSAUGv2 with the Heresy 9mm BCG
A tester noticed using the SSAUGv2 with the Heresy had bad timing and resulted it premature detonation. Nobody was hurt and nothing was damaged, but nonetheless the SSAUGv2 trip is designed around the OEM BCG. Please wait till we make one specific for the Heresy 9mm.
r/AUG • u/the__grim__sleeper • Dec 04 '25
PSA: Using A3M1 Rails/Optics on A3M2–QD Optic Adapter
galleryIn case you didn’t know, it is possible to run A3M1 style rails and optics on an A3M2 receiver without leaving an ugly gap or losing the forward QD sling mount that the AUG is known for. However, the part(s) necessary for this aren’t sold on Steyr’s website. You will need to email or call Steyr and ask for parts US1264020040 ($58.27), 3900073 ($3.50), 3860019H ($1.00). Those are the M2 QD sling swivel, screw, and roll pin, respectively. The QD sling mount is rotation limited. Also works with Clawgear handguard.
r/AUG • u/tobiasorieper • 11h ago
Photo AUG Para 9mm
galleryI inherited this from my grandfather, who was a lifelong collector of firearms. He acquired this from the gentleman named in the letter in the 90’s. He kept it in the original shipping box, unfired until 2021 when he gave it to me. I managed to convince him to put the first shots through it with me on my birthday that year. I’m grateful that I did as he would come to pass within the next few years.
It usually stays put up but I have been doing some inventory recently and came across it. I figured this would be a suitable place to share, as there may be a few of you around here who would appreciate it.
Hope someone may find it interesting 🙂
Question Silencer recommendations
What’s the best silencers to use on the Aug? Have a waffle A3zl, trying to get one before January and laws may change back .
r/AUG • u/Bigshit67 • 8h ago
NYLAUG accuracy?
reddit.comNYLAUG accuracy?
What kind of groupings are you guys getting with your builds? One of my coworkers gave me a kit, 16” barrel and everything, just because I mentioned I was into the platform and had a 3d printer lol. I’m not expecting precision rifle accuracy of course, but if the guns hold pretty decent groupings at 100 yards I’d be very much willing to build it.
I know someone on here made a post on theirs and mentioned they got 1.3-1.5 MOA groups, but after all, that is only one example of the bunch that have been built. And I know KAK barrels have had a spotty reputation overall, so that’s why I’ve been curious as to how these hold up.
r/AUG • u/Desmo_AUT • 1d ago
News In Austria you can Buy a AUG A4
waffengebraucht.atLooks like a Thales F90
r/AUG • u/Tango-November • 2d ago
New A4 Variant?!
galleryWas just scrolling and found this, is this real?
I kinda like the advanced warfare sci-fi look
https://www.waffen.shopping/steyr-aug-a4-223-rem-qcblrdpicmiisal-pure9017-417mm
r/AUG • u/basichelmet • 1d ago
Ridge/lip on A3M2 charging handle
galleryIs this ridge/lip normal to have in the charging handle channel? The charging handle seems to get stuck there sometimes and I have to tap it once more for it to slam home. Granted this is brand new and maybe just hasn’t been racked enough, but seems strange. Note: it’s the ridge on the bottom part of the charging handle area, I understand the one on the top is so the bolt can lock back.
r/AUG • u/Unable_Divide_6664 • 1d ago
How to get in touch with Steyr?
I’m trying to order a part that’s not listed on their website (the front swivel adapter for M1 rails on M2 Augs) and a lady answers but always transfers me to someone who never picks up the phone. Is there a more reliable way to get someone who can help out?
r/AUG • u/Ohh_Yeah • 2d ago
Photo Do I get to join the club now? Steyr USR, stamp date August 1997
Does a Holosun Iris 3 or 4, or other LAM, fit and function on the stock side-rail of an A3M2?
r/AUG • u/Accomplished-Meat525 • 2d ago
News New HUB mounted Modular Reflex System for the AUG!
galleryHi All!
I've been sitting on this design idea for some time. But now, it's with much pleasure I introduce the first and only (Patent pending) Modular Reflex system for the AUG rifle.
The meat and potatoes and what it achieves;
This is a three piece Modular Reflex System (MRS) that allows you to attach any HUB capable suppressor, silencer, blast diverter or linier compensator to your host rifle without the use of a proprietary muzzle device.
The rear of the modular reflex system (MRS) uses the bayonet lug threads to attach to the rifle barrel. This seals the system and allows the internal volume of the suppressors blast chamber to be essentially doubled.
The middle section is, as the name implies modular. When removed, the attached muzzle device is allowed to telescope over the barrel, allowing the muzzle to protrude into the suppressor.
This allows for different length configurations and a choice of the rifles overall length and suppressor efficiency. Additional length middle sections (eg. 1/2") would be available for custom desired configurations. (shown in the phots is the 1" or 25.4mm middle section)
The front section of the MRS uses a ported bypass collar to hold the device in place around the barrel, while still allowing the end user to add a muzzle device like a brake. (The muzzle threads are NOT used to secure the MRS) This gives the device a second point of contact to ensure proper alignment during mounting and shooting, while also allowing gas to enter the expansion chamber. This front section also has the HUB threads that interface directly with the suppressor/muzzle device.
What all this means for the end user;
If you have a HUB mounted muzzle device/suppressor, you can now make that item a reflex design! Since the addition of extra internal volume helps a suppressor efficiency, you will now experience lower back pressure and better suppressor performance.
With this same design, you may also remove the middle section of the MRS and essentially replicate a K can, but while keeping the benefits of the added volume of a reflex design.
This system gives both the benefits of reflex suppressor and the ability to choose the overall length of your platform.
Summary;
Before this option, you had to pick either a reflex suppressor, a K can or a device such as the OCL OPS/AE/OC HUB Reflex Adapter.
However, with the OCL/B&T design you are still limited to one length and the need for a proprietary muzzle device for mounting.
This ultimately results in diminishing returns, as internal volume is now decreased using an additional threaded and collared muzzle device.
With the MRS, you achieve all the benefits, without those mentioned drawbacks.
r/AUG • u/im09monaco • 2d ago
Finally
galleryA3M2 arrived this Monday and Corvus rails and other stuff next day.
Gotta find some mags soon.
r/AUG • u/Bahaadur73 • 3d ago
Gear & Kit How come we still don't have companies making the AUG A3 CQC Rail kit in times of 3D printing etc.?
r/AUG • u/lemons4sail • 4d ago
Question Awful horrendous downright evil Steyr customer service
Guyz pls help I just traded my entire Funko pop collection for an MSAR STG 556 and when I looked at the pic rail there was a scuff mark on the metal. UNACCEPTABLE!!! I contacted steyr directly and after an entire 8 hours of waiting they told me that they can't warranty this rifle because they don't make them anymore. How can I sue Steyr generally and Herbert specifically for one gorillion dollars?!
r/AUG • u/Spam_Goose_XIX • 4d ago
Where to get deals on an AUG?
I've been wanted one ever since I was a kid and decided now is a good time to try to get one, any recommendations on where to get one for a good deal online? I dont mind between M1 or M2 I'd just rather not pay full retail on an M2, cant get one local because nobody stocks them, eventually would like to get HBAR barrel as well
r/AUG • u/vagusbaby • 4d ago
Question Aug A3 SF 60mm tube fits in A1 housing
Hello all! I have an A1 with the classic 1.5x donut optic, and looking to replace it with the A3 SF 60mm 3x tube. To be clear, I am thinking of removing the actual optic tube from the A3 mount and replacing just the A1 optic tube, as I know that the A1 optic is integral to the receiver. I've seen a YT video by someone who has done this, and wondering if the A3 SF 60mm will fit. I appreciate any other info y'all have to share!
https://www.youtube.com/watch?v=2VIrc9nnduI&list=WL&index=1&t=196s
r/AUG • u/PeakViewRange • 6d ago
Photo Update: we got the line throwing dildo 😂😂😂 enjoy this Australia masterpiece
r/AUG • u/elvincino • 5d ago
Question New NATO AUG owner question
Hello,
I recently purchased an AUG and was reviewing my rifle for some of the issues I’ve seen crop up for people. The only one I may have is if I try loading a mag while the bolt is back and hit the bolt release it will snag on the mag if I’m pushing up on it, but will free itself when pulled down and seem to load normally. Only tested this on a lancer mag so far. Curious if this is cause for concern or fixable. Referencing this video, the “magazine catch malfunctions” section.
