r/AskALocksmith • • 18h ago

What are my options for this lock?

Thumbnail
gallery
3 Upvotes

So I’m a first time homeowner and I’ve run into my first annoying issue. We want to change out this deadbolt for an electronic Schlage BE365 lock so we don’t have to give people a key or hide a key or anything like that. When I went to put the lock on the casing, overlaps the bottom knob and so will never be flat (face palm). In general, it seems like the deadbolt and knob are really close together.

What are my ways out of this? Replacing the door is silly. I don’t see any other good locks that would work with this spacing. Is it possible to move the hole up and like patch it?


r/AskALocksmith • • 19h ago

Door handle spring

Thumbnail
gallery
1 Upvotes

Anywhere I can find those spring ? Thx


r/AskALocksmith • • 1d ago

DIY help Total noob: smart lock install

Thumbnail
gallery
5 Upvotes

Hey there,

Looking to install a smart lock on my door because:

  1. I need to replace the lock cause it’s really hard to open. 2. It’s gonna be easier for my kids to get in and out while locking/unlocking.
  2. Short term renting.

BUT, the installed hardware make me wonder if it’s feasible.
I have attached pictures of the mechanism.

Can you please advise my sorry ass on a possible install?
Thanks in advance.

Ps: I’m not a native English speaker.


r/AskALocksmith • • 1d ago

New Keyless Bolt install

11 Upvotes

I’m trying to install a new Schlage BE365 CAM 619 but the outer knob spins 360 with no movement of the inside tailpiece. The pin that drives the deadbolt. All other deadbolts I’ve worked with have about a 100 degree rotation to open or close the deadbolt. Any ideas?


r/AskALocksmith • • 2d ago

Key w/ for washed

2 Upvotes

I guess this is better than losing the damn things, which I thought happened. For six months. Anyway, I found them after washing some jeans.

I have the one unit key with a fob head. I have not even tried to use it because it was washed a good two months ago and I’m pretty sure it’s fried out.

I did buy a new key template with a fob, and I’m wondering if that can be programed by a mobile locksmith. One did tell me I could, but I don’t understand how they would cut the key to match my old key.

Also, obviously my car battery is dead and it’s in the garage. There is room, somewhat, for a locksmith to access the actual ignition location and my car battery. Help me Mr. Wizard.

I’m assuming that without the working fob, I won’t be able to shift gears at all even to push it out of the garage. Am I right?


r/AskALocksmith • • 3d ago

Hi! does anyone know what model this door knob is? TY TY!

Thumbnail
gallery
3 Upvotes

Super appreciate your expertise.


r/AskALocksmith • • 7d ago

General Question Corbin Cabinet Lock Key

Post image
12 Upvotes

Hello. Any tips for finding the right key? I looked up Corbin and “CAT 173” on easykeys and got too many possibilities to be helpful, including a result for a Bobrick lock based on the catalog number.


r/AskALocksmith • • 9d ago

General Question ISO of a replacement for this Yale exterior door mortise lock

Thumbnail
gallery
6 Upvotes

Hi all,

I hired a locksmith to repair this lock/knob set on my 1931 front door, and instead he ripped it out and destroyed part of my door frame. I learned a valuable lesson about getting referrals that day.

This lock set isnt salvageable, but I would like to replace it. I've found some similar pieces for sale, but I'm not confident about narrowing down the choices. Does anyone have suggestions about where to look?


r/AskALocksmith • • 8d ago

Hinge Replacement on Western Wire and Iron Chicago Pocket Gate

Thumbnail
gallery
2 Upvotes

I'm wondering if anybody has had to source hinges for one of these old Western Wire & Iron pocket folding security gates? I haven't had the time or clear building to pull the whole gate out yet. So I'm asking to take the easy way out. Any help is appreciated.

They appear to be 5"x3" 3-hole swing-clear hinges. I am not sure how it is attached for sure to the pocket bay.


r/AskALocksmith • • 9d ago

mystery cabinet

Thumbnail
gallery
8 Upvotes

hello internet can you help me get into this cabinet? i recently started a new job and inherited this office that has this giant cabinet inside. there was also a mountain of keys left and every single one i tried did not work. the top drawer is open but none of the others will open. there’s a ton of pants in the one that will open so im curious to find out what other treasures await.


r/AskALocksmith • • 11d ago

General Question How to Tell if CCW or CW Unlocks?

2 Upvotes

Per the title, how can I tell which direction is the unlock direction? If the lock is stiff, I don't want to be applying the force in the wrong direction and maybe break the key.


r/AskALocksmith • • 11d ago

Removing deadbolt plate

Post image
3 Upvotes

Deadbolt plate is stuck to the door after removing the cylinder. Any advice on how to remove? Thanks!


r/AskALocksmith • • 12d ago

Question about Locksmithing Installed wrong?

5 Upvotes

I recently installed a “Commercial lock set” door handle, and the door knob that leads to the outside will not fully rotate, and has to be opened awkwardly. What did I do wrong? Was it the hardware or user error?


r/AskALocksmith • • 13d ago

Help identifying which skeleton key for this lock

Thumbnail
gallery
6 Upvotes

House was built in 1930 in Oklahoma. There is a letter P on the top left of the face plate and a 7 on the top left. All other locks in the house have the P with different numbers on the top left


r/AskALocksmith • • 14d ago

General Question I bought a bunch of used keys, and this Kwikset key was included. Why is it cut like that?

Thumbnail
gallery
27 Upvotes

r/AskALocksmith • • 14d ago

Left handed key?

4 Upvotes

Just found this sub, I’ve always wondered about a building we used to service in Denver

No matter what you did, or how hard you tried, the key would not open up the lock on a utility closet in your right hand. Jiggle, jerk, pliers, didn’t matter. If you put it in your left hand everything would function as normal, immediately. There was probably 20 of us that went through this learning curve.

Edit: I still ask people that can’t open doors to try it with their left hand


r/AskALocksmith • • 15d ago

Hi Mr. Locksmith. This is the third time I am making the same copies of keys. They do not work. What is happening??

2 Upvotes

I need two copies of my key. So I went out to two local businesses.

First two times, I went to Ace Hardware; however there was no luck. The key just did not work

The third, I went to an actual locksmith, and again! The key did not work!

What is going on?? After three times this is ridiculous


r/AskALocksmith • • 16d ago

Will cutting the spindle prevent to lock from engaging?

Thumbnail
gallery
2 Upvotes

We have an internal office door that mistakingly had a handle with a lock installed, and people keep engaging it and forgetting to unlock it. I’ve tried installing a new handle with no lock but it’s on a glass door and the casing that holds is really narrow and I haven’t found another model that will fit it.

Is there a way I can modify the current handle so the lock just doesn’t engage? Could I just snap the spindle short? I’m this close to just sealing the latch with hot glue so it can’t be turned in the first place. Any advice would be appreciated!


r/AskALocksmith • • 20d ago

Locksmiths: what is the most common lock failure you see that the owner could have avoided?

6 Upvotes

Genuinely curious what the pattern is from the shop side.

The ones I have run into as an owner: glue or superglue used to fish out a snapped key, paint and primer sprayed straight into the keyway during a repaint, WD-40 followed by graphite turning into a paste, and a strike plate that no longer lines up because the door sagged a few millimetres over a summer.

All of those looked like "the lock failed" from the outside, and none of them were the lock's fault.

So for the people doing this daily: what is the single most common failure you get called out for that the owner could have avoided with five minutes of care? And what would you tell a first-time homeowner to check once a year so they never meet you?


r/AskALocksmith • • 21d ago

Lock malfunction How do I fix a loose doorknob that won't move the latch buddy?

2 Upvotes

One side doesn't move the latch to open the door guy! But the other side does friend!


r/AskALocksmith • • 21d ago

what is the best magnetic invisible security lock for a cabinet. this is not for child proofing but for a secret space on a cabinet that I am thinking of building.

2 Upvotes

r/AskALocksmith • • 21d ago

Broken key stuck

Thumbnail
gallery
1 Upvotes

I tried a glue gun stick. I tried burnt qtip

The key can turn while inside. And the other side does not seem like it connects

What should I do ?


r/AskALocksmith • • 22d ago

General Question I bought a used 2014 Altima and Key fob is dead. Will a locksmith be able to program a oem fob I buy off the Internet? I prefer not to bring it to Nissan for obvious reasons. Thank you in advance!

2 Upvotes

r/AskALocksmith • • 24d ago

Can you find a photo of this lock?

2 Upvotes

Around 3 months ago , i found in my parent's attic ,a steel lock but I've never seen that kind before.

I brought the lock to my father to ask why do we have that. (Stupid question, i know)

He said that he found that old lock in a River while he was Just going for a walk, for then finding It buried in the sand and partially intact, of course with no Key.

After a while i asked to my dad to see if he could open It , and i forgot about It, for then Remembering that lock and asking to my dad if he was able to open It, but to my Surprise he said "i don't have It anymore , i threw It away in the trash"...

At least i was able to Remember the look of It.

-it could stay up by itself

-really heavy

-oval cylinder shape if viewed from the bottom

-there was something writted at the bottom along side with the date "1975"

-huge shape but smal and long shackle

-oval shape but with Sharp edges

Has anyone from america seen or had this kind of lock?

If you know something about this, write me back.

I Hope :/