Hey everyone!
I'm a student , currently working on a custom underwater ROV (Remotely Operated Vehicle)
We've been developing a fairly advanced ROV with a focus on underwater exploration, manoeuvrability, stability and custom electronics. I'm looking to connect with people who have experience in underwater robotics and would love to hear your suggestions, experiences and technical advice.
Here's an overview of our current design.
- Propulsion System
- 8 BLDC thrusters.
- 4 horizontal thrusters and 4 vertical thrusters.
- Vectored thruster configuration for improved manoeuvrability.
- A2212 BLDC motors for propulsion.
- 8 bidirectional BLHeli-compatible ESCs.
- Custom 3D-printed thruster housings, mounts and other mechanical components.
- Independently controlled thrusters for movement in multiple directions.
2. Control System and Electronics
- Raspberry Pi Pico as the main onboard controller.
- Single IMU with an integrated magnetometer for orientation and heading estimation.
- Active PID control for movement and stabilization.
- Independent ESC control channels.
- ESP-based communication and control architecture.
- External computer planned for computationally intensive tasks and AI-based functionality.
3. Mechanical Design and Waterproofing
- Custom PVC structural frame.
- Separate 3-inch electronics enclosure.
- Batteries housed in a separate aluminium enclosure.
- Individual ESC enclosures with aluminium thermal plates for heat dissipation.
- Potting compounds and waterproofing techniques for electrical protection.
- Slight positive buoyancy with provisions for payload capacity and buoyancy compensation.
Our target is approximately 8 kg in-water vehicle weight, with around 250–500 g of positive buoyancy and a payload capacity of approximately 2 kg.
4. Camera and Ground Station
We're also developing a dedicated ground station rather than relying on a basic laptop-and-controller arrangement.
The planned system includes:
- Custom ESP-based controller and communication interface.
- Joystick-based movement controls.
- Dedicated live video display.
- Additional video output for laptop monitoring.
- Real-time telemetry and vehicle status monitoring.
- Depth, heading, orientation and battery-voltage information.
- A graphical interface for controlling and monitoring the ROV.
5. What We're Looking For
I'd particularly appreciate advice on:
- PID tuning and stabilization techniques for an 8-thruster ROV.
- Managing electromagnetic interference between BLDC motors, ESCs and magnetometers.
- Waterproofing individual ESCs while maintaining sufficient thermal dissipation.
- Pressure sensors for accurate underwater depth measurements.
- Tether communication and power-delivery considerations.
- Hydrodynamic improvements and vectored thruster configurations.
- Practical experiences with custom ROV electronics and ground stations.
I'm especially interested in hearing from people who have built their own ROVs rather than just commercially available systems.
Any technical suggestions, criticism or recommendations would be genuinely appreciated!
Thanks!