r/Autobody • • 6h ago

HELP! I have a question. Replacing entire tailgate?

Thumbnail
gallery
3 Upvotes

Hi! I was involved in a hit-and-run accident a few days ago with my 10-month old baby in the back (we are all OK right now). Fortunately, the driver was caught.

Went to a shop and they said because of the dents that go through the bottom of the door and door itself is pushed in (see photos), need to replace the entire tailgate.

It’s a Honda CRV Sport Touring 2026. It closes fine, everything seems OK besides the visible damage.

And yes, I know I can go to another shop for another opinion… But I wanted to know if anyone has experienced something similar and ya’lls opinion on whether the tailgate needs to be replaced or is it fixable.

Input would be greatly appreciated 😄

EDIT: Thank you to everyone for their thoughts!!! I will get the entire tailgate replaced.


r/Autobody • • 19h ago

Is there a process to repair this? Hit a concrete pillar at gas station

Post image
3 Upvotes

I tried to pull out the sunken in part of the door but those cracks were there and decided to stop. Would it be better to sand it down and put body filler there? It’s quite sunken in…I also did a half assed quick repair on section next to the door but I was planning on going back and retry. Im not looking for pro results, just ok.


r/Autobody • • 2h ago

HELP! I have a question. Leave as is or repair

Thumbnail gallery
1 Upvotes

r/Autobody • • 4h ago

HELP! I have a question. Best way to fix the cab near 3rd brake light?

Post image
1 Upvotes

Unfortunately, just found this. It was hidden by a truck cap.


r/Autobody • • 6h ago

HELP! I have a question. Surface rust - non negotiable?

Post image
1 Upvotes

Had a small collision, and you can see some rust on the area,

Can I leave this, or will it become a big problem?


r/Autobody • • 6h ago

HELP! I have a question. How screwed am I? New to bodywork help

1 Upvotes

If someone theoretically bought a fender from a junkyard and sanded it not down to bare metal yesterday, then theoretically put acid etch primer on the whole entire panel how much work would it be to get the project back on track, and not looking horrible? I’m completely new to this and someone said that primer would be fine but after researching it sounds like exactly what not to do can anyone just give me some guidance before I waste any more money on top of crashing my car? Thanks.


r/Autobody • • 7h ago

HELP! I have a question. Mystery scratch

Post image
1 Upvotes

Would anyone know what could have caused a scratch like this? It’s a weird pattern.


r/Autobody • • 8h ago

HELP! I have a question. Audi mirror hit help

Thumbnail
gallery
1 Upvotes

I was backing up super close to curb and hit a mailbox box 🥲 my mirror went the complete opposite way. Do we think it’s a goner? Or can it be turned back to normal position? When I lock my car they normally fold in and I can hear it still try to do that despite the hit it took. Wondering if can be manually pushed back into place or if it can be salvaged by taking the door apart and removing it then putting it back once turned—feels like it’s getting caught on the chrome outline part of the window.


r/Autobody • • 12h ago

Acceptable quality? Paint peeling off the bumper. 10 month old Kia Seltos. What can I do next?

Post image
1 Upvotes

r/Autobody • • 14h ago

HELP! I have a question. Dent Repair

Thumbnail
gallery
1 Upvotes

Some ungrateful prick crashed their shopping trolley into my car. Noticed it when I got home.

Any idea how I can fix it without breaking bank? Possibly at home if anyone has done it themselves.

Thank you!


r/Autobody • • 17h ago

HELP! I have a question. Looking for advice to manage a muddy Undercarriage & Lower Front Bumper damage on 2011 Toyota Hybrid Prius

Thumbnail
gallery
1 Upvotes

My under-car splash shield had to be ripped out months ago. At the time, a trusted mechanic told me I didn't need to replace it. Since then, the right side of my front bumper (passenger side) has started to hang a bit.

Tonight, I mistakenly drove into this huge muddy hole on an unpaved, county road. For about 30 seconds, my car was stuck and I had to reverse- fortunately, I got out.

Now, my bumper is fully sagging and the hood of my car is raised. I tried to take the best photos I could since I just arrived home.

I plan to take my car to the mechanic, but I’m wondering what to expect. The exposed undercarriage of the front end of my car is drenched in mud. What can I do to avoid any problems w/my car? Should I expect really bad news?

Also, please don't leave any mean comments. I got lost driving and followed google maps- which landed me in this worsened predicament. I appreciate any advice to help fix my issue.


r/Autobody • • 22h ago

HELP! I have a question. HELP!!! Any suggestions FRNT BADGE RADAR cover

Post image
1 Upvotes

r/Autobody • • 23h ago

HELP! I have a question. Backed into a parking spot and damaged my shark-fin roof antenna. Could I fix myself?

Post image
1 Upvotes

I accidentally backed into a parking spot and damaged the shark-fin antenna on the roof of my car. From the picture, it looks like the antenna has partially come loose from its base. I’m not sure if the antenna itself is broken, if the mounting mechanism has been damaged, or if there’s damage to the roof underneath it.

I’m hoping to get a rough idea of whether this looks like a simple antenna replacement or a more involved bodywork repair.

Thanks so much!


r/Autobody • • 8h ago

Is there a process to repair this? Hyundai Atlas White tricky to match on the front bumper?

Thumbnail
gallery
0 Upvotes

Edit: Added TLDR - How do painters repaint a bumper, if the paint matches better on either left or the right side and both fenders are OEM?

I got my front bumper replaced and repainted under insurance. I made the ASC do it 3 times but I don’t think they are capable of matching the colour. The axalta paints guy was also called but he also couldn’t enable a match. I’ve given up and chose to live with it because service centre trips eat into my time.

What I am curious to understand from the sub is - The left matches better than the right. In their previous attempt it was the exact opposite. How do good painters handle this without touching the fender’s OEM paint? My car’s right side has seen more sun than the left. Could that be a factor?

I am sharing some photos. The rear bumper is OEM finish and almost matches the rear fender but the repainted front looks pretty bad.


r/Autobody • • 17h ago

RUST Body work in winter?

0 Upvotes

So I made the mistake of thinking I could sand down the rust spots over my wheel wells and seal it with some rust inhibitor and then paint it. But after I got in there the rest was worse than I thought and now I've got some large holes I need to filled now I know that the best way to do it is probably to weld a piece in there but I don't have a welder or know how to weld and I feel like it's going to cost me to pay for that. So also because I didn't get it done right away winter is set in and I don't have garage so I'm wondering is the fiberglass patch get from like Bondo does that work here and is that something you can do in around zero temperatures say hi is around 34 but dropping overnight or do I need to find a garage to park it in overnight while it dries