r/Autopot • • 2h ago

Troubleshooting Plant Growth Problems Magnesium Deficiency or CalMag Issue? Looking for Advice!

Thumbnail
gallery
4 Upvotes

Hallo zusammen!

Meine beiden Pflanzen zeigen seit etwa ein bis zwei Wochen eine Vergilbung zwischen den Blattadern. Ich vermute einen Magnesiummangel oder ein Problem mit CalMag, da ich 100 % Osmosewasser verwende.

Beide Pflanzen erhalten die gleiche Nährlösung, aber eine ist deutlich heller als die andere.

Mein Setup:

  • Alter: 26 Tage nach der Keimung
  • Sorten: Tropical Banana (Barney’s Farm, links) & One Love Sativa (Humboldt, rechts)
  • Substrat: Plagron Coco/Perlit 70/30
  • Töpfe: 11-Liter-AutoPots (derzeit noch manuelle Bewässerung)
  • Wasser: 100 % Osmosewasser
  • Nährstoffe: Athena Grow A/B, zunächst mit niedrigeren Dosen, dann schrittweise auf die volle Dosierung (jeweils 2,9 ml/l) für die letzten beiden Bewässerungen erhöht
  • pH-Wert: 5,8–6,0 (seit Kurzem verwende ich bei Bedarf Athena Balance)
  • EC-Wert: 2,0 mS/cm
  • Beleuchtung: 435 PPFD / DLI 28,5 / 50 cm Abstand

Eine Sache finde ich seltsam: Obwohl Ich dünge mit einem EC-Wert von 2,0, aber mein Abfluss hat konstant nur 1,0–1,2. Ist das normal beim Anbau in Kokossubstrat?

Was meinst du? Sollte ich Athena CaMg zusetzen, wenn ich 100 % Osmosewasser verwende (ich habe es bereits bestellt), oder wäre es sinnvoller, einen möglichen Magnesiummangel gezielt mit Bittersalz zu beheben?

Oder vermutest du etwas ganz anderes? Ich würde mich sehr über deine Gedanken, Erfahrungen und Ratschläge freuen!


r/Autopot • • 3h ago

Grow Journal First autopot grow

Post image
2 Upvotes

Starting week two since flip


r/Autopot • • 1h ago

Troubleshooting Plant Growth Problems Day 16 veg what's going on? Read description for more info

Post image
1 Upvotes

Hello guys!

Day 16 veg. I was top watering until yday thet I decided to put some water in autovalve system to see if they are ready for bottom feeding with auto pot and this happend

Tap water 5.5-5.6 ph 1.5ec . Plants were looking ok before bottom feeding. Any ideas ?


r/Autopot • • 3h ago

Product Review Heisenbeans… just popped some Grape Banger and Bangkok Runtz. Has anyone ran this breeder?

0 Upvotes

r/Autopot • • 22h ago

Community Gettin' fired back up

Post image
28 Upvotes

r/Autopot • • 16h ago

Troubleshooting Plant Growth Problems Struggling Kush Mints Flush Attempt.

Thumbnail
gallery
5 Upvotes

I have a kush mints that is struggling and I’m not sure why. Three weeks into veg and it looks awful, some sort of lockout.

I amusing:

2.2g pots

Jacks 321 5.8ph in the res

Coco/perlite approx 50/50 Canna Coco bricks

Airbase with wicking holes filled lightly with coco.

no airdome.

I know you aren’t supposed to flush but I’ve tried multiple things, foliar sprays, targeted feedings to increase mag and iron etc. What I’ve settled on is flushing my pot with 3 gallons of Jacks 321, and extracting the water into a bucket with this tiny transfer pump.

I’ll update on how this goes.


r/Autopot • • 1d ago

Grow Journal Solo Cup Autopot Day 46

2 Upvotes

Day 46 for this Pineapple Treat inside the revised solo cup Autopot growing in 100% coco coir. Using Canna A/B and Big Bud. She isn’t a big as my normal solo cup Autopot grows, she has received some pollen from Terpsneeze as a little experiment.


r/Autopot • • 2d ago

Grow Journal Day 42 from sprout

Thumbnail
gallery
9 Upvotes

Old school mango haze, crème de la chem, sour crinkle x grape crinkle all from mephisto and gmo 8 by atlas seeds in the autopots.

GMO 8 atlas seeds in fabric/soil pot. Receiving recharge every other watering in fox farm soil and grow dots. Otherwise plain water every other day.

Autopots are getting canna a/b nutrients ph to 5.8-5.9. Total ec 2.4 (tap 0.4). They’re in 70/30 coco/perlite with airbases and air domes.

Vpd at 1.3 currently. PPFD 900-1000

The soil plant has been flowering since 11-9.

The others are all showing some pistols but a bit behind the soil plant.

I’ve had to defoliate them quite a few times as they’re all pretty dense/bushy. The old school mango have is exceptionally dense and “limby”. I have been doing some light LST throughout. I’ve been running them 24 hrs.

Any thoughts? I was thinking I may try to push the ec up a bit more on the autopots. And on the soil plant I used a light dose of grow dots so I was also thinking about a little fertilizer boost for it as well. What do you all think about a light dose of the canna a/b? I’m not sure if there’s enough nutrients left in the soil to finish it out…


r/Autopot • • 2d ago

New Setup & Installation First-time grower, turned on AutoPot today, is this set up correctly?

12 Upvotes

Two questions:

- I've seen AirDome guides say that there shouldn't be bubbles, but is this a good strength for the air pump?

- Is there supposed to be substrate around the AQUAvalve? ChatGPT says no but I had to use soil to fill the holes in the AirBase to create the capillary effect so naturally soil got into there.

I'm very excited to have this auto-watering system but as a first-timer, it does feel overwhelming lol so trying to make sure I have things set up properly. If not, lay it on me so I'm not flooding my apartment here soon!


r/Autopot • • 2d ago

Nutrients & Feeding (PH/EC) Had a question on nutrient strength with autopot

2 Upvotes

I'm using Bonnie and Clyde and I heard you use half strength with a autopot because it's constantly getting nutrients is this true? What do you guys run your ec at in mid flower?


r/Autopot • • 3d ago

Grow Journal Purpz and BananaCane

Thumbnail
gallery
13 Upvotes

r/Autopot • • 2d ago

General AutoPot & Gardening Advice Rain Science bags in XL trays

0 Upvotes

I am looking for guidance on using Rain Science bags. I am finishing my first run in Autopot XL with Root Pouch 5 gal bags in a 5X5, but next will be a sealed room with CO2 and such. I suspect Rain Science bags will provide exceptional air pruning, and I would like to have massive roots for this new environment. But the closest fit diameter is either 10 or 12 inches. Does anyone have experience making these work and did it appear to be worth it?


r/Autopot • • 3d ago

Grow Journal Grow Nr 2 of 2026

Thumbnail
gallery
3 Upvotes

3× Black Orchard – Wizard Trees (front center, center, and rear center)

1× Jackfroot – Nine Weeks Harvest (front left)

1× StickyBoof – Anesia Seeds (front right)

1× RS11-DEO – Wizard Cut (rear left)

Grow setup:

Tent: 120 × 120 × 200 cm

Main LED: 650 W

Under-canopy lighting (UC): 100 W

UC currently running at 10% power as an experiment to see whether starting UC during veg week 3–4 changes the growth pattern of lower branches.


r/Autopot • • 3d ago

System Maintenance Friendly reminder to keep ya shit clean

Post image
44 Upvotes

r/Autopot • • 3d ago

Grow Journal First time in autopots,yayagogo

Post image
24 Upvotes

Day 3 since flipped
Ready for takeoff


r/Autopot • • 3d ago

Equipment Issues Wrong root stoping disc

1 Upvotes

I'm at the beginning, the roots look already out of the pot.

I have two different "fabrics" discs, I used the one that I found first. It's completely black,... Now when I think about the other one was gold on the other side. Shit.. what do I do now?

And if the roots hit already the outside, should I turn the system on? Airpots?

I'm put the around 10/12 days ago inside the pot, 8,5 l. Normally my plan is to turn the system on after this watering I did today is soaked. I guess around 5/6 days.


r/Autopot • • 3d ago

Troubleshooting Plant Growth Problems Plant issues, any help is appreciated!

Thumbnail
gallery
4 Upvotes

I’m on Day 10 of Flower. Running 6 autopots.

1.9 EC / 6.1 ph at the base, 1.8 EC / 5.6 ph at the rez.

450 PPFD

General hydroponics flora trio nutrients, dosed at week 1 flower light feeding recommendations as well as an additional 3ml/gallon of calimag.

Strain is White Widow.

No clue what’s going on. Started with 6 plants. This one and the other on the end of the autopot line daisy chain have been struggling hard. Finally pulled the other because the growth of its friends had it completely covered.

They say to fix nutrient issues at the reservoir with autopots but I’m not seeing how I have nutrient issues or ph issues…I’ve thoroughly inspected for insects as well but haven’t found any.

Has anyone ever had any trouble with their last plants in the chain getting nutrients? I’m just confused as to why the front two are growing incredibly well while of the back two one has died and this is the other. Last pic is a pre-wilted picture of the issues I had with the plant I already had to pull.

Feels like I’m doing everything right and still fucking it up. Any help is appreciated.

Thank you!

Edit: photoperiods, sourced from Dutch Passion…6Pot system with airdomes and bases pushing 1 liter per minute of air to each pot while lights are on.

Average temp is 76, average humidity 55%, average VPD 1.12.


r/Autopot • • 3d ago

Troubleshooting Plant Growth Problems Looking for hydroponic growers to share their experiences with crop disease management

0 Upvotes

Hi everyone!

I'm a university student from South Korea studying plant pathology.

I'm currently conducting a survey to better understand the real challenges hydroponic growers face, especially regarding crop diseases, management costs, labor, and existing solutions.

My goal is to learn from actual growers' experiences and explore ways to address problems that matter to farmers.

The survey takes approximately 15–20 minutes, depending on your answers. Participation is completely voluntary, and this is not a sales promotion.

**Survey link:**

https://forms.gle/jfhczzUeYTKVDMiy7

I would really appreciate hearing from anyone with practical hydroponic farming experience.

Thank you for your time and help!


r/Autopot • • 4d ago

Grow Journal What's the max number of plants for Tray2Grow 25-gal soil bed?

Post image
6 Upvotes

I've got 6 autos in the 25 gal bed and I think their roots are competing with one another. I've grown much larger plants in there when I only put 2 in.

Curious to get any feedback on how many autoflowers folks have put in the bed at once (I'm thinking 3-4 is probably the max before there's resource contention)


r/Autopot • • 4d ago

Grow Journal Transplanted Autos Day 12

2 Upvotes

Just to clarify, I have no idea how old these autos are. I’m calling this day 12 since transplanting as the only reference that I know for certain. I didn’t track their germination dates as I normally do, only that they were well past my normal transplant window. Rather than toss them, I decided to keep them, see how they perform, and share the process. I’m turning on the Autopots today and one thing that I like to do is let the pots dry out a bit before turning things on since I’m using 100% coco coir, this helps prevent them from having too much water too soon. So far, the transplanted seedlings have received my go to nutrient formula, which I call the “Cheat Code.” It’s a variation of techniques and information I learned from Autopotamus plus the scientific research backed nutrient analysis Ben from Speedrun Seeds has discussed here, plus a slight tweak I added. I’ve been using this approach for a while now and it’s proven and has produced great results. I’m starting with filtered water at 0.33 EC using my DIY water filtration system. All in 100% coco coir, Canna Professional Plus. The biggest game changer to my setup has been the Autopot XL that I use with all my runs that I have connected to a 32 gallon reservoir so I can go on vacations, cruises, or long fishing trips without having to worry about the garden.

Canna A/B @ 12-14 mL/gallon

Botanicare CalMag @ 2.5 mL/gallon every other week/feeding

Advanced Nutrients Big Bud @ 4 mL/gallon

Botanicare
Hydroguard @ 3 mL/gallon

Strains are:

Bishops Lemon Cherry LSD (Front Left)

Bishops Lemon Cherry Gorilla Cookies lol(Front Right)

Cat Dad Rayne Conan Kush F2 (Back Right)

Laughing Hyena Skunk 99 (Back Left)

Light: EVO8, PPFD 418

There are so many ways to achieve a successful grow, and there’s no single right way to do things. The way this run started may not be the optimal approach, but it’s a real example of what’s possible under these circumstances. It’s a blessing to grow these plants and share the experience with others. Hopefully, sharing my experiences can help someone else just as others have helped me. Have fun, do your own thing, and grow your own! This run is simply a test to see how these girls perform under stress and les than ideal conditions. I’m collecting data along the way, and although the plants’ exact ages are the one missing detail, it’s been great watching their progress. More to come!


r/Autopot • • 5d ago

General AutoPot & Gardening Advice Feeding

1 Upvotes

Stupid question probably what feeding chart should I follow only see ones for photoperiods and I’m running Autoflowers any help appreciated


r/Autopot • • 5d ago

Nutrients & Feeding (PH/EC) Anyone turn on the autopot system without hand watering?

0 Upvotes

Curious if anyone has had success from dropping a clone in an autopot 3.9 gallon pot and skipping the recommended hand watering stage and turning on the system right away?


r/Autopot • • 7d ago

Grow Journal Transplant day

Post image
39 Upvotes

r/Autopot • • 7d ago

New Setup & Installation Tray2grow: Should I use my Nutrient Water to soak the Root control and Capillary matting??

Post image
12 Upvotes

Just got the Tray2Grow. It says to soak the mats before installing. Should soak them in my Nutrient solution since the mats will be sucking up that water which should go to my Pots??


r/Autopot • • 8d ago

General AutoPot & Gardening Advice Switching from hand watering coco to Tray2Grow right before flip?

3 Upvotes

Hey all. Currently hand watering 4 - 1gal plants in 70/30 coco feeding GH Trio and CaliMagic. They are around days 32-35 from sprout and am planning to flip soon.

I thought I’d be set doing this through the entire grow, but had a couple unexpected things came up where I will have to be out of town for up to 4 nights in December and January so I need to figure out an automatic watering system.

I originally had planned to just set the plants in a flood tray with an inch or two of nutrient solution when I’m out of town, but looking at the T2G’s that seem like it might be more ideal and could potentially just run that way the rest of the grow freeing up some significant time.

I know ideally you’d probably turn them on earlier, but does anyone see an issue switching from top feeding to bottom feeding with a T2G and rez at this point?