r/Axecraft • • 27d ago

Bastionhead Woodworks is your one stop shop for ax handle blanks

Thumbnail
tiktok.com
0 Upvotes

r/Axecraft • • Jul 27 '25

Axe Head Soup? Refurbish rusty tools by converting rust to a stable black patina

Thumbnail
gallery
124 Upvotes

I just made a YouTube video (https://youtu.be/5go-o8TCg94 ) on using a tannin solution to convert the rust on vintage axes to refurbish and protect them while retaining as much patina as possible. I’ve found myself explaining it a few times lately so I thought it was better to make a video.

The most convenient version uses just tea and (ion free) water and is not too much more trouble than boiling pasta. I did a bark tannin brew in the video.

The method works by converting active red rusts (various ferric oxy-hydroxides) to stable, black ferric tannate. Different ways of inducing this chemical process are used to preserve iron and steel artefacts for museums, in some commercial rust converters like Rustoleum Rust Reformer, and by trappers who use a 'trap dyeing' process to refinish rusty traps before setting them. I am using a version of the trap dyeing procedure that can be done in a home kitchen by boiling the rusty object in a tannin solution. Artefact conservators apply commercial or specially prepared tannin rust converters but may still add a water boiling step because it leaches away rust causing ions like chloride (from salt in soil, sweat, dust or sea spray).

From my reading, I am under the impression that it is better to have an acidic pH in rust converting solutions but I have not experimented with this for the boiling tannin bath so I don’t know if you could get away with your tap water. I use rainwater because it doesn't have alkaline minerals, unlike my very hard well water. Rainwater also doesn't have rust-promoting chloride ions like many residential water. Other ion-free (or close enough) water includes deionized water, reverse osmosis filtered water, and distilled water.

There's many potential tannin sources that can potentially be used. Tea (black, not herbal) works very well and is quite fast because the extraction is quick. You can get powdered tannin online or in home wine making shops. I used bark from Common Buckthorn as my tannin source because it's readily available for me. Many other trees will also work, and there's a fair amount of information available on bark tannins because they are used in hide tanning. Spruces, oaks, Tamarack and other larches, Scotts Pine, Willow, Hemlock, and others can be used to tan hides and would no doubt work for converting rust. Late season sumac leaves are used by trappers for trap dyeing and other leaves like maple and willow have tannins and would be worth a try. 'Logwood trap dye' for dyeing traps is commercially available and it's apparently not very expensive so that could be convenient. Green banana peels and other esoteric vegetable matter also have tannin and might work if enough could be extracted.


r/Axecraft • • 2h ago

Little hickory I cleaned up for a Boy Scout

Thumbnail
gallery
16 Upvotes

“HICKORY” Kelly How Thompson Co. Duluth, Mn.

“40” on the opposite side

Handle stripped lacquered, the Wood by Wright soft wax

His mom requested it for his birthday.


r/Axecraft • • 17h ago

Plumb Tasmanian

Thumbnail
gallery
50 Upvotes

I have this brand new Plumb Tasmanian my Dad bought but never used. Sat in the garage for 30 years at least I LOVE the handle, but the axe head needs restoring It's not uncommon, but it's hard to find unused. Cut the head off, restore it? If so? What kind of wood is that? Thanks yall!


r/Axecraft • • 1d ago

Forging an axe in one heat

Enable HLS to view with audio, or disable this notification

551 Upvotes

r/Axecraft • • 21h ago

I am a handles worst nightmare lately

Thumbnail
gallery
47 Upvotes

r/Axecraft • • 17h ago

Great Grandfather’s Axe

Thumbnail
gallery
22 Upvotes

I finally revived my Great Grandfather’s axe, passed down four generations it’s now in my care, and I know I’ll be taking my time and care to make sure it can last another few generations


r/Axecraft • • 21h ago

My latest project

Thumbnail
gallery
18 Upvotes

Falls City beveled Dayton, stamped 3-2 on the poll, 3lbs 6oz on my scale. Hung moderately closed on a 28" yellow birch New England style handle, #1 grade from TD Handles. Used a wedge they included, I believe it's cherry but it looks good whatever it is. I still need to fix the bit and sharpen but it's well balanced and swings nicely.


r/Axecraft • • 1d ago

Old hurds razorblade midd 1800ish fallers axe birthday build and the plumb after some oil.

Thumbnail
gallery
37 Upvotes

r/Axecraft • • 13h ago

Helloooo- Axe Reccomendations

3 Upvotes

Hey guys! New to this, ive been shopping around for an axe and am wondering what to get. I am doing bushcraft, and I have a heavy duty fixed blade for finer batoning tasks, so the axe can be a bit more specialized. Im thinking a 24-28 inch handle, 2.5-3.5 lb head, i like 5160, I would most prefer something made of cpm 3v, my knife is that and its tougher than Nokia. I like the Scandinavian head sales and ths German styles. The slab of steel that american style ones tend to be doesnt interest me. Any recomendations would be greatly appreciated, or even if you want to sell a used one thats like I want, or tell me how my preferences need to change. Thanks guys!


r/Axecraft • • 17h ago

advice needed First axe recommendation

2 Upvotes

As the title says, looking for my first axe and am hoping for some recommendations based on my use case.

Axe type/style and/or brands would be greatly appreciated.

I have a maul for splitting rounds but am looking for a dual use axe or hatchet to solve for:

  1. Processing that wood into smaller chunks for my wood stove.

  2. General winter camping duties. Felling small trees, processing branches, processing wood into extremely small chunks for my backpacking wood stove.

Is there an axe type that’s going to serve all of those duties well? Thanks.


r/Axecraft • • 1d ago

Flying fox on 24" handle

Thumbnail
gallery
16 Upvotes

Recently someone asked about why I put a flying fox on a 24" handle. It basically give you a bit more leverage and power in the cut and will throw some pretty decent chips for the weight of the axe. But, the longer handle doesn't take away from one handed use in this case since the WR 25pack handle is kind of designed to be a one or two handed use handle.

Also honorable mention to my 2nd flying fox that I hung on a CT 19" premium pack axe handle. I refer to it as "We got GFB small forest axe at home"


r/Axecraft • • 1d ago

Additions for the wall..

Thumbnail
gallery
23 Upvotes

Long time projects finally completed


r/Axecraft • • 1d ago

What do you think of my axe?

Thumbnail
gallery
44 Upvotes

Curious about this axe. I absolutely love it, but I don’t know much about axes really, my experience being mostly this one and the rusty old choppers everyone has at there cottage or camp. Don't recall anything about it I bought it so long ago. Nice and light and chops most wood around here really pretty easily. Aside from refinished the handle a couple times and cleaning up the edge now and then I’ve don’t nothing to it.


r/Axecraft • • 2d ago

You nerds seemed to like my Norlund Canadiene. Here is the Tomahawk Hudson Bay in action

Thumbnail
gallery
147 Upvotes

Don't focus too much on the name. It's obviously not what most of us would call a tomahawk.

Also this thin handle is absolutely fantastic.


r/Axecraft • • 2d ago

Do I hang this Norlund Hudson Bay axe on a wall or use it?

Thumbnail
gallery
94 Upvotes

I recently bought a tool box and this was inside. It has never seen a piece of wood.
It seems like the perfect hatchet for kindling at camp. Excellent head shape and weight.
But from my google searches it could be worthwhile to just admire it.
What do you think?


r/Axecraft • • 2d ago

Been seeing hella norlund post. Here’s mine carving a knife handle

Thumbnail
gallery
38 Upvotes

r/Axecraft • • 1d ago

My $25 marketplace score

Post image
33 Upvotes

Was on marketplace last night and I just couldn’t pass it up. None of them are super sought after brands, but that Pulaski is in great shape so why not. I’m going to do my first handle install on that and the double will get one when they are in stock again, local store only had one.


r/Axecraft • • 1d ago

I bought a thing Restoration Project

Thumbnail
gallery
12 Upvotes

Got this bad boy for $20 to practice restoration stuff on. Whatcha think?


r/Axecraft • • 2d ago

I bought a thing First Axe Purchase

Thumbnail
gallery
64 Upvotes

Picked this up for $50. I have some experience with a double bit and thought this was a good piece to practice on. Any and all comments, opinions etc. are welcome!


r/Axecraft • • 2d ago

Identification Request Axe ID Help

Thumbnail
gallery
6 Upvotes

EDIT: Answered by Matt. TY!

Hello, folks. I have a hewing axe head with a very faint makers mark I could use help identifying. I can make out a W, but that’s about it. It measures about 6” long x 4.5” at the bit & 1.5” eye. Thanks in advance.


r/Axecraft • • 2d ago

Father left me this, anyone know anything about it?

Post image
62 Upvotes

Any information would be very much appreciated


r/Axecraft • • 2d ago

4 ridge slasher jersey

Thumbnail
gallery
44 Upvotes

Firts try at octangonal handle, 36" long, figured maple and walnut swell. Pretty cool.


r/Axecraft • • 3d ago

Love using my Norlund Canadiene

Thumbnail
gallery
64 Upvotes

Probably my favorite axe.

Small Segway, I grain orientation may be a bit overhyped


r/Axecraft • • 2d ago

Boys Plumb Pack

Thumbnail
gallery
25 Upvotes

Finally getting around to posting this hang. I acquired a couple new vintage pack axe handles 24” last year and was searching over the summer for just the right head. Picked up this sweet plumb boys axe at an antique store. It was the perfect match. Hung it with a nice walnut wedge. Hope you enjoy and happy swinging.