This Kubota Slugger KSG-L7 came in after an abandoned DIY repair attempt. The glove was partially disassembled, the pocket was distorted, and most of the original laces were badly stretched and damaged.
During disassembly, I found that the internal pinky felt stay was completely broken. This was more than just a cosmetic issue, as the felt stay provides important structural support to the pinky side of the glove.
Here are the main parts of the restoration:
- Pinky Felt Stay: Removed the fractured felt core and installed a new, denser replacement.
- Trap Web Relacing: Rebuilt the complex trap-style web using custom-skived leather lace.
- Custom Lace Preparation: Reduced the lace thickness to 1.65 mm (approximately 4.4 mm wide) to fit the narrow web openings without excessive friction.
- Palm Repair: Reapplied glove grease compound between the palm lining and outer shell to restore adhesion.
- Complete Relacing: Replaced the damaged laces throughout the glove and adjusted the tension to restore its shape and balance.
The trap web was particularly challenging. Unlike a standard I-web or H-web, its overlapping lace structure requires careful tension control. Too much tension can pull the side frames inward and distort the entire web.
This glove also required approximately six 1.8-meter lace strands for the complete relacing.
The final result is a structurally restored KSG-L7 with a new pinky support, a properly aligned trap web, and a much more balanced pocket.
More photos and details of the restoration process:
Full Restoration Log – Kubota Slugger KSG-L7