r/BeginnerWoodWorking • • Jan 27 '26

MOD POST: NO AI IMAGES, PLANS, ETC -

329 Upvotes

I can't believe I have to make this type of post.

This is not a place for AI Images, AI Plans, responses, etc.

AI Images: AI Images give false impressions of work. If you are posting AI Images and trying to pass it off as your own work. You will be banned under Rule 3 - Original Content and Rule 7: No Karma Whoring

AI Plans: While AI is good at something, you should never TRUST AI to properly create woodworking plans. There are MANY TRUSTED Sites that have free or low cost woodworking plans. Posting of AI Plans will get your post/comment removed, and a possible ban. Under Rule 3, and 9.

Thank you for your attention to this matter!


r/BeginnerWoodWorking • • Mar 31 '26

STOP POSTING YOUR "VIBE" CODING APPS HERE!!!

420 Upvotes

If you post, they will be removed! Full Stop! No discussion! If you keep trying to post, you will be banned! Read the Rules of the sub you are posting to!

We don't want your AI SLOP/Vibe Coded app. You aren't the first person to create that type of app.


r/BeginnerWoodWorking • • 3h ago

Finished Project Built a Wardrobe

Thumbnail
gallery
142 Upvotes

I live in a small space and I had no room for clothes since my fiancée takes up the majority of the closet, so I made a wardrobe.

I didn’t finish the inside since I’m the only one that will see it on a daily basis


r/BeginnerWoodWorking • • 3h ago

Finished Project Joiner’s Mallet

Thumbnail
gallery
45 Upvotes

Another project complete! Ash head, Walnut handle, and Paduak wedges, and enough glue to hold a house down in a tornado. I’m so proud of this ugly little thing!


r/BeginnerWoodWorking • • 11h ago

Finished Project Saw horses

Post image
100 Upvotes

At 45 years young this is the only time I really built anything myself…was never my thing or interest…but after many years of working retail and getting into a different career it was time to invest in some actual tools and learn…they wobble slightly but not sure how level the ground is…but looking to dive in and improve…im realizing how much information is available that if you put in the effort and time truly anything js possible…Any advice to improve these and make them actually useful is appreciated…didn’t have time to paint them I have to leave them outside but with some rain coming this week I’ll tarp them…thank you for letting me ramble


r/BeginnerWoodWorking • • 18h ago

Equipment New Mallet!

Post image
128 Upvotes

I got a new mallet! Would it be good for timber framing?


r/BeginnerWoodWorking • • 10h ago

Finished Project Eclipse carpenters vise

Thumbnail
gallery
28 Upvotes

Hello!! I picked up an eclipse 9” carpenters vise used (was in box still) for a very good price. Just wanted to say how wildly nice it is! I mainly got it to add weight to the bench as it weighs like 45 lbs and counterbalances the leg vise nicely. Also it’s jest nice to have another vise option. I can lock an 8’ board in it with no issue! The quick adjust is smooth and simple, it’s very strong and the tolerances are fantastic

Id recommend one! Honestly easier and cheaper than my leg vise… and as much as i hate to admit it.. just as useful


r/BeginnerWoodWorking • • 18h ago

When your wife wants an 8ft sit and stand craft table

Thumbnail
gallery
69 Upvotes

r/BeginnerWoodWorking • • 22h ago

Finished Project Proper chuffed with this

Thumbnail
gallery
131 Upvotes

Made up my own a plan* in 20 mins or so this morning, bought enough material, took 3 hours total, didn't mess up once. And made it with my dad. He also surprised me with these vices - large and little - the latter which just clamps to the bench which is amazing! Nice English Record number. Tested it sawing a 2x4 - absolute game changer.

*probably a simplified amalgam of many Rex Krueger videos but still...

My first bench - wish I'd done this a year ago** 🤣 No more clamping things to the table saw. Utilitarian design I'd say - matches my stool. Pretty sturdy - I'm gonna add some ply to the back to prevent racking, maybe the sides too, do some dog holes, and mount this big vice (I've laminated some more 2x4s inside the frame to take the not inconsiderable weight). I am over the moon.

**to be honest I did buy some timber about 3 months ago and started planing it flat when I was going to do a laminated butcher block type top originally, but I abandoned the whole thing immediately due to only owning a jack plane...I finally picked up some ply today and changed my design and sent it.

You know they say there's the project you planned, they one you actually made and the one you should have made? I really think this is all 3, though time will tell. Can't believe how easy it was, my favourite project to date. I'll take suggestions for improvements of course.

I can finally stop watching YouTube videos about workbenches.

Also, a reminder to go build something!


r/BeginnerWoodWorking • • 8h ago

Discussion/Question ⁉️ Is the Bosch GET75-6N worth $249 as an upgrade from my DeWalt 5" orbital sander?

Post image
8 Upvotes

On my last project (a board game table), I spent around 10 hours sanding, and that was without the tabletop leaves, which would have taken even longer. I did everything with my DeWalt 5" orbital sander.

Now that I'm starting the next table, I'd like to cut that time down. Do you think the Bosch GET75-6N is worth upgrading to?


r/BeginnerWoodWorking • • 19h ago

Finished Project New scroll saw

Thumbnail
gallery
48 Upvotes

I’ve been wanting a scroll saw. This is my first project using it for my daughter’s first birthday. The lowest Daisy matches her height at birth. Numbers are wood burned.


r/BeginnerWoodWorking • • 8h ago

Discussion/Question ⁉️ Bed Frame Attachment

Thumbnail
gallery
5 Upvotes

These are the legs for my bed frame I'm building. The rails will sit inside and rest on the ledge. For attaching the rails to the legs, I was thinking of doing pocket holes, but I'm unsure if it will be strong enough for a king size. Any suggestions for joining it?


r/BeginnerWoodWorking • • 6h ago

Discussion/Question ⁉️ Had my handplane blade sharpened in a shop and now it's rounded

3 Upvotes

Got a Stanley no.4 and I dented the plane iron by a couple of mm. Had it sharpened in a shop because my gear is good for only small resharpening. They gave me the plane iron back sharp enough, but I noticed it's rounding enough that 1-3mm are missing at the corners of the blade. My question is - is it still going to work and is there a way to fix it (I don't think anyone shop in town can do this)? The problem I see is the alignment with a cap iron.


r/BeginnerWoodWorking • • 42m ago

Discussion/Question ⁉️ Dados and tenons-best tool

1 Upvotes

I want to do a project of built ins for my living room. Have done this in my old house so have some experience. The thing I struggled with was cutting dados for drawers and doors on a basic table saw with no dado blade and I do not want to do it again. I have the budget for new equipment.

My question is what is the better choice? Do I get a new table saw that accepts a dado blade or a router with table and get dado and tenon bits? Priced out the two and prices at what I am looking at are both within budget.


r/BeginnerWoodWorking • • 18h ago

Difficulty in neatly carving a bas-relief

Post image
21 Upvotes

Hello! This is my first time working with wood. I bought a cheap gouge and knife set from Lidl to do some sculpture. I'm not doing very well; my new tools are tearing the wood rather than making clean cuts. Is it my technique, my tools, or the wood itself? It seems very soft; I salvaged some wood I found on a construction site. I am open to any sugestion :)

Thank you !


r/BeginnerWoodWorking • • 1d ago Mindblown

I've achieved FLATNESS!

Thumbnail
gallery
750 Upvotes

I mean, not perfect centers on everything.. and this is really ugly..

But it's stable and mostly flat!

And I've learned stuff in the building.


r/BeginnerWoodWorking • • 1d ago

Kitchen counter shelf (hand tools, glue)

Thumbnail
gallery
75 Upvotes

Made my first piece of furniture. Built it on my balcony with hand saws, clamps and sandpaper. Glued together and coated with lacquer.


r/BeginnerWoodWorking • • 3h ago

Discussion/Question ⁉️ I'm making a royal game of ur board out of olive wood, and as a complete beginner I don't know how to continue regarding painting and oiling.

1 Upvotes

I've made the dice, the board and the chips you play with all from the same wood.

Now I want to continue with painting and oiling but I have no idea on what to do first, what types of oil and color to use.


r/BeginnerWoodWorking • • 21h ago

Discussion/Question ⁉️ Difficulty to drill into birch plywood with 8mm bit

Thumbnail
gallery
28 Upvotes

I have the dowelmaster jig from Wolfcraft and I was using it for the first time. The bit I use is an 8mm brand new bit. The drill is set to the correct mode and I had to put all my body weight onto the drill to be able to actually drill into birch plywood. I don’t think this is normal, but I am not sure what I am doing wrong or what the problem is. That’s a 12V drill. The battery was charged. But it’s from 2018, could it be that the battery is somehow dead?

Note: First photo shows the reverse direction set on the drill. That was not the issue.


r/BeginnerWoodWorking • • 4h ago

Discussion/Question ⁉️ Cuting small planks lenghwise with circular saw

0 Upvotes

Hey everyone! I have what might be a dumb question, but I can't find any good way to do it safelly.

I want to cut plans in hald lenghtwise (its pallet planks, don't judge) with a circular saw. There a tons of diy sleds bit from what I've seen theh are for cutting wide sheets, so you just need to place them on top of what you want to cut, which in this case is too thin.

How would you go about cutting these with the circular saw, in thr safest way possible?


r/BeginnerWoodWorking • • 13h ago

Equipment I have a band saw and I want to add the riser block.

Thumbnail
gallery
4 Upvotes

This is the bandsaw that I have and want to add a riser block to it. Do you all know if I would be able to buy a kit or, would I have to make a block and extender rod for guard preferably that dose not cost $300.


r/BeginnerWoodWorking • • 1d ago

Finished Project Some finished projects!

Thumbnail
gallery
188 Upvotes

I’m a stay at home mom and newly found hobbyist woodworker. Built the first couple projects while pregnant and the rest during my babies nap times haha. The only one I used a plan for is the work bench. The rest I came up with on my own. Currently working on a “mud room” build, the last photo is the shoe cubby I recently built for that space.


r/BeginnerWoodWorking • • 18h ago

Discussion/Question ⁉️ Ideas for red oak thread cutoffs

Post image
5 Upvotes

I have about 30 11x11 cutoffs and not sure what to do with them.


r/BeginnerWoodWorking • • 17h ago

Stabilizing large cracks

Post image
4 Upvotes

36” oak cookie that I’ve been drying under shavings with pentacryl for about 6 months. At this size I knew that cracks would be almost unavoidable so I’m not surprised. What are ya’lls thoughts about stabilizing them though? I’m not a big fan of epoxy but I’m unsure that bowties would be strong enough to support such large gaps. Or is it just too far gone and I should give up on trying to save that chunk?