r/Blacksmith • • Dec 30 '25

Current Bot Invasion

Post image
33 Upvotes

r/Blacksmith • • 5h ago

I accidentally created Polynesian Tribal Damascus!

Post image
147 Upvotes

This was the billet that I posted last time, but somehow in the prep process ine of the 4 pieces got rotated 90⁰. I ended up using an angle grinder to cut out that quarter, then forging the v left over down to flat, then cut it and stacked it so it mirrored itself.

Bob Ross was right... Happy accidents, friends.


r/Blacksmith • • 12h ago

Picked up an old post vice today for $50

Thumbnail
postimg.cc
9 Upvotes

r/Blacksmith • • 3h ago

Propane forge sputters at less than 12 PSI

1 Upvotes

Hello all, I have been told by numerous smiths that they run their propane forges at around 5-10 PSI for general forging and turn it higher as they need.

My forge seems to sputter and turn itself off at anything less than 11-12 PSI. It is a venturi type burner with the choke about halfway closed.

Is this indicative of needing a better hose/regulator? Or is there something else I can tweak?


r/Blacksmith • • 18h ago

Just curious

Thumbnail
gallery
15 Upvotes

So I posted about this anvil a while back which my neighbour found at the scrapyard and gave it to me. It's an old anvil and it has some symbols on it. I was just curious about what could those symbols mean. There's a U shape and some lines near the top right of the U shape. Btw it's also a stake anvil. Also I live in Central Europe.


r/Blacksmith • • 1d ago

Anvil ID

Post image
15 Upvotes

What have I got here? In Western Australia if that helps.


r/Blacksmith • • 21h ago

Belt sander direction

Thumbnail reddit.com
3 Upvotes

r/Blacksmith • • 1d ago

Is this anvil worth buying, or is it dead?

Thumbnail
gallery
116 Upvotes

I’m new to blacksmithing working on a sledgehammer head right now as my anvil. Looking for something more in my life, and also, a better anvil. Is this anvil usable?


r/Blacksmith • • 2d ago

I built a Cam Hammer

1.2k Upvotes

Please follow and check out my other reels of it forging steel. Look for my upcoming build CAM HAMMER 2.0


r/Blacksmith • • 1d ago

Drawing out tong reins by hand

87 Upvotes

r/Blacksmith • • 13h ago

go check them out, can't be worse than the mods here 👋Welcome to r/RealBlacksmithing - Introduce Yourself and Read First!

Thumbnail reddit.com
0 Upvotes

Hello Blacksmiths and those interested in the craft. The Maine Blacksmith's Guild has started a community to help separate the classically trained from the glorified metal benders. Internet has done a disservice to the craft and it would be great to streamline the divisions of labor once again. Real forges-real blacksmithing. Feel free to share there to encounter other like minded individuals. We are more than just knives

Yours truly,

Sam H. Smith

Guildmaster |Maine Blacksmith's Guild

Forged in Fire's Untested Champion


r/Blacksmith • • 1d ago

Can someone help me out with making a choice on what anvil I should look into checking out at these estate sales

Thumbnail
gallery
15 Upvotes

There’s two anvils I’m looking at. There at two different estate sales and there in opposite directions and I’ll only be able to look at one. The one in the photo here and then there’s one that is a jhm certifier that looks to be acleast 100 pounds


r/Blacksmith • • 1d ago

Success!!!

Post image
13 Upvotes

I made a post a few days ago about fabricating a blade for my chamfer tool.

I used some mild steel from the hardware store and drilled a hole using the old blade to line it up. Then I used my angle grinder with a sanding disk to get an edge and the correct width. Finished the edge with a file, then cut to length with my Dremel. I did not heat treat it so it may get dull quickly but for now it’s much sharper than the old blade. Cuts the PVC (and my thumb) with very little effort.


r/Blacksmith • • 2d ago

Welp, guess that's one way to finish off the day.

395 Upvotes

Been running this hammer just about every day for most of this last year. Got an hour left in the day and the ram breaks.

Future me usually freeloads off all my hard work, so he can deal with this tomorrow. Present me is going home early.


r/Blacksmith • • 17h ago

Could somebody identify this knife? I think it was made back in the Cold War because it says « made in W Germany » but I’m not sure

Thumbnail
gallery
0 Upvotes

I bought it this morning at a flea market


r/Blacksmith • • 1d ago

Can you recommend me a wire?

Post image
1 Upvotes

I need to build up some tabs with weld, and then file them into shape.

This item goes through a piece of tempered steel and is pounded into shape on the other side. This holds the piece tightly in place. The file tells me it's made of some kind of carbon steel. You can see how it's put in the picture

I need a material for my welder that once laid can be heated and forged.


r/Blacksmith • • 2d ago

Made these scroll hooks today

81 Upvotes

r/Blacksmith • • 1d ago

Hey first time blacksmithing need help for metal ideas

1 Upvotes

So for some quick context I’m currently making a forge out of a brake disk and some pipe based off a video I saw for a beginner forge. I’m using a 55lb anvil from harbor freight and a random square head hammer about 2lbs (don’t know what type but it’s similar to the type most smiths use) I found somewhere in my grandfather’s shed.

I’m trying to figure out good metals to start out with for practice. I currently have probably 30lb in rebar chopped up in random sizes and about ten railroad spikes laying around

The rebar is just plain carbon steel with a little rust but I was wondering if it would work for practicing to make stuff like small blades, a grappling hook, or other small things


r/Blacksmith • • 2d ago

Cant hook

Thumbnail
gallery
117 Upvotes

This is a reproduction can't hook I made with some help from a striker and a green woodworker at a demonstration. It's made of mild steel and the handle is white oak finished with boiled linseed oil.


r/Blacksmith • • 2d ago

Mini anvils my wife got me for my bday

Post image
39 Upvotes

r/Blacksmith • • 2d ago

Work in progress Halberd

Thumbnail
gallery
63 Upvotes

One of my most liked though not favorite polearms is the halberd, and I've always thought about a specific design to it, which I gave to life. I made this using a 3mm, mild steel sheet, which I cut and grinded away.

I saw a YouTube video of a gallant doing something similar, which inspired me to do this. I plan on welding a socket that goes all the way up to the hilt of the spearhead.

Thoughts? Criticism is very appreciated


r/Blacksmith • • 2d ago

Texture/Surface Finish Questions

Thumbnail
gallery
27 Upvotes

I made this split cross yesterday. I'm trying to make a bunch for the whole family for Christmas this year. I used a ball peen to texture one side and went over the whole thing with a wire wheel afterwards. The texture is cool but I'm looking for other suggestions. I don't know if it's possible but I think it being shiny and smooth would look good but not sure how to do so without ruining the peened texture. Also is it possible to texture both sides? Maybe put it on wood to peen it? Thanks


r/Blacksmith • • 2d ago

Mokume Lanyard

106 Upvotes

Handforged triple alloy mokume gane lanyard bead with a snake knot lanyard. I went with a brushed finish on this one.


r/Blacksmith • • 3d ago

Made this yesterday

1.0k Upvotes