r/Bladesmith • • 3h ago

Commission Request ISO custom swordsmith near Missouri, USA

1 Upvotes

Looking for a custom blade to be made in commemoration of my to be wife and I for our wedding


r/Bladesmith • • 1d ago

Forged Blade 8" 52100 Cleaver

59 Upvotes

Just finished up this 52100 8" (214mm x 85mm) multi purpose cleaver commission. This is meant to be a do it all knife. Profile is a somewhat of a tall Nakiri mixed with a Gyuto.

Was taken to a near zero grind with very slight convexity. Then I put the edge on with stones - Shapton Pro - 120, 1000, 2000, Morehei 4k & 0.5 micron Diamond stop. It is hair popping.

There is some convexity forged into the blade as well to aid in cutting performance and food release (thickest point is about 1/3 the way down from the spine, but then tapers to a more flat profile in the from 1/4 of the blade.

Handle is thuya wood with buffalo horn - taken up to 1000 grit, then treated with 2 coats of Tried and True original finish.

Measurements:

52100 steel

Heat Treated to a 63HRC target, verified with files.

Edge length - 214mm

Height at heel - 85mm

Height at tip -63mm

Full distal taper

Spine thickness:

- @heel - 0.20"

- @tip - 0.048"

12mm behind the edge - taper from 0.040" to 0.031"

3mm behind the edge - 0.012" to 0.010" @ the tip


r/Bladesmith • • 1d ago

Fit & Finish Cable splicer knife in Magnacut and CF

Thumbnail
gallery
52 Upvotes

r/Bladesmith • • 16m ago

Question So how do you guys feel about the ABS going woke?

0 Upvotes

r/Bladesmith • • 1d ago

Forging WIP Quenching 2 Swords.

22 Upvotes

Sword quench day. A 30" rapier and a 30" arming sword. A his and hers for a wedding. There is a new trend I am seeing. My next 5 orders are for weddings. Anyone else seeing this or doing this?


r/Bladesmith • • 2d ago

Damascus / Pattern Weld Chef's knife.

72 Upvotes

r/Bladesmith • • 1d ago

Stock Removal Another wedding another pair finished up

Thumbnail
gallery
32 Upvotes

8.5in chef and 5in petty both in 19c27 with stabilized claro walnut handles


r/Bladesmith • • 1d ago

San Mai / Clad Stainless San mai dagger

Thumbnail gallery
25 Upvotes

r/Bladesmith • • 2d ago

Forged Blade Made some throwing knives for my fiancé - might keep them for myself…

Post image
44 Upvotes

Could not find time during the week to make them, so I made a mad dash for the shed as soon as she left to run some errands this morning. Pretty happy with how they turned out for a 4 hour project!


r/Bladesmith • • 2d ago

Forging WIP Time to Quench

86 Upvotes

quenching this 10" damascus Fighter.


r/Bladesmith • • 3d ago

Forged Blade Finished today

220 Upvotes

r/Bladesmith • • 3d ago

Forged Blade Finished forged assembly.

Thumbnail
gallery
71 Upvotes

It's not AI.

As they said in the other post!


r/Bladesmith • • 2d ago

Stock Removal 220mm Western Chef Knife -High carbon steel and Thuya wood

Thumbnail gallery
12 Upvotes

r/Bladesmith • • 3d ago

Fit & Finish My Crocuta S model in Magnacut, Carbon fiber and MCB Cerakote

11 Upvotes

r/Bladesmith • • 3d ago

Fit & Finish Vice City vibes

Post image
27 Upvotes

r/Bladesmith • • 3d ago

Forged Blade Finished forged assembly.

Post image
19 Upvotes

r/Bladesmith • • 4d ago

Critique Request First finished Damascus! Open to advice and criticism.

Thumbnail
gallery
264 Upvotes

Wish i was able to get the pattern to pop better. What do you all use for abrasives?


r/Bladesmith • • 3d ago

Damascus / Pattern Weld Shuriken - WIP - quick test etch

Post image
66 Upvotes

r/Bladesmith • • 3d ago

Fit & Finish 52100 Steel Elk Antler Hidden Tang

1 Upvotes

This is my recently hand made hunting knife for my son.


r/Bladesmith • • 5d ago

Forged Blade I finally earned my ABS Journeyman Smith rating — at the first official ABS judging ever held outside the United States! 🇧🇷

Thumbnail
gallery
778 Upvotes

After years of dedication, countless hours in the workshop, and continuous learning, I am proud to share that I have officially earned my Journeyman Smith (JS) rating from the American Bladesmith Society.

On November 13, 2026, in São Paulo, Brazil, my five knives were unanimously approved by a panel of seven Master Smiths — five Americans and two Brazilians.

This was particularly meaningful because it marked the first official ABS judging held outside the United States in the Society's 50-year history.

My deepest gratitude to my teacher and mentor, Master Smith Eduardo Berardo, to my wife Ariadne for her unconditional support, and to my sons, who inspire me every day.

I'm incredibly proud to be part of this historic moment for Brazilian bladesmithing.

The journey continues!

Marcelo Lubaczwski — ABS Journeyman Smith.


r/Bladesmith • • 5d ago

Damascus / Pattern Weld One down, one more to go

Thumbnail
gallery
38 Upvotes

This karambit is 1 of 2 projected commissioned by a USMC brother. One of the biggest challenges to date. This is the first Karambit I’ve made and it’s made from 52100/15n20 Damascus, random pattern. Custom handle resin scales, USMC mosaic pin and peened brass pins. This project is the first time I took my time with the design, researching, logistics, materials and manufacturing(same with the Kukuri).


r/Bladesmith • • 5d ago

Forged Blade Noblie folder with a Dragonskin Damascus blade and crystallized titanium handle

59 Upvotes

Hey guys, I found this old clip on my phone and can’t remember if I ever posted it here, so I figured I’d share it.

We made this folder back in the spring. It still looked like winter when I took the video, with snow on the ground. I like how the outdoor light catches the texture of the blade.


r/Bladesmith • • 5d ago

Stock Removal First Rasp Knife

Thumbnail
gallery
117 Upvotes

r/Bladesmith • • 4d ago

Historical Method Fitting the tang of a Naginata

3 Upvotes

I’m trying to wrap my head around how the tang fits into the shaft of a naginata (Apologies for not using the correct words, I do not usually make eastern style blades, and do not want to use a language I’m not familiar enough with to know when I’m using it incorrectly)

I know that the grip of a katana is made by splitting the wood along its length and carving it to fit, but that seems impractical when working with a 6’ long pole. Can anyone confirm or comment on how this might have been done?


r/Bladesmith • • 5d ago

Process Breakdown Etching CuMai and how I make my own Etchant

12 Upvotes

How I make my own etchant to get a nice dark contrast. ⅓ Ferric, ⅓ muriatic, ⅓ distilled water. the distilled is important depending on the water quality where you live. I also have a tank for CuMai and one for Steel. The copper leaches into the acid and give a slight hue to the damascus.