r/Bowyer • • Jan 12 '21 This

Community Post How to post a tiller check

Thumbnail
gallery
507 Upvotes

r/Bowyer • • Aug 16 '22

AMA Ask me anything - Correy Hawk

Thumbnail
gallery
275 Upvotes

r/Bowyer • • 2h ago

My Qing bow instructor back in China šŸ‡ØšŸ‡³

10 Upvotes

110 lbs Qing bow (manchu bow)| 150 g armor-piercing arrowhead | 40 m precision shooting.

Power meets precision. šŸ¹

#QingBow #ManchuArchery #TraditionalArchery #HeavyBow #ChineseArchery #Archery


r/Bowyer • • 34m ago

Bowyers Paradox: folly or fluke?

Post image
3 Upvotes

So Im about to Flax back this - my first grown up bow. Before I proceed, I want to make sure its all sitting right alignment wise. Its a snaky shape so presently, when I run the string tip to tip, the string meets the edge of bow just above the handle and crosses the centre mid limb. The kids bow i made from the corresponding other half of the original log was the same and shot exceptionally straight Im guessing due to archers paradox and the string bringing the arrow straight past the bow rather than towards its imaginary centre…however I am concerned that perhaps this level of offset might present problems scaled up at high power. Should i attempt to steam and straighten her out a bit or is she already good? Thanks for your generous consideration…


r/Bowyer • • 7h ago

Can I use this?

Post image
8 Upvotes

I've been given this. White oak offcut from a joiner. It's 45mm wide by 25mm thick and looks pretty straight grain. Could I make a small bow from it??


r/Bowyer • • 12h ago

Questions/Advise Christmas for my Bowyer

6 Upvotes

My husband has been a bowyer for about 40 years. He used to hunt but now his real joy is to just make bows. He has a great shop that has all he needs from what he tells me. When I ask what he wants for Christmas he says he doesn't need anything. Months ago He talked about how he used to have a bow that had real snake skin as a backing. That bow was sold long ago. Is snake skin something I can buy without much knowledge of bow making? Is there certain kinds? Would that make a good gift? Is there anything a bowyer would love to have that is not usually part of of his craft? He is a good man who works so hard to give me an amazing life. I try to show him I am grateful anyway I can.


r/Bowyer • • 14h ago

Help identifying this wood

Post image
4 Upvotes

This tree had been dead since we bought a property in May. I thought it was too close to the power lines so I called the electric company and they dropped the tree and left the log. We thought it would be nice to slice it in half and make a bench out of it but the wood is so pretty on the inside I thought if it’s a good wood for it, to have a bow made out of it. This wood is incredibly dense. This log was about 8 feet long but even cut in half it was far too heavy to carry by myself. This would have been no problem with an oak log or maple.

Can anyone here identify it with this picture?


r/Bowyer • • 10h ago

Questions/Advise Kirschen vs Ochsenkopf

Thumbnail
gallery
1 Upvotes

I've been thinking about buying a drawknife, and I would have liked to get something vintage, as I did with my Record planes. However, while I can find plenty of planes, there seems to be absolutely nothing available on eBay.it when it comes to drawknives.

After watching a YouTube video by Dan, I've narrowed my choice down to either Ochsenkopf or Kirschen.

I was thinking of getting both: the curved Ochsenkopf for shaping work and the straight Kirschen for debarking. Do you think this is a good combination, or would I be better off doing everything with just one of them?

In the video, he mentions that the flat Kirschen blade flexes a little too much, which is why I was thinking of using it only for debarking, so as not to risk damaging the edge of the curved one.


r/Bowyer • • 15h ago

Shipping staves to Europe from the US. Is it possible?

2 Upvotes

I'm not sure if this is the proper subreddit to post this in, so if the mods delete this I won't be offended.

I'm moving to France next year. I have five nice staves I've harvested myself that I won't be able to work on before I leave (2 yew, 2 ash, and 1 hazel; I live the PNW). From what I can find googling, it doesn't seem like it's possible to send them to Europe. Am I (I hope) incorrect?


r/Bowyer • • 1d ago

Trees, Boards, and Staves Cracks origin? Forced take down or drying?

Thumbnail
gallery
3 Upvotes

4 days since tree cut, ends were sieled with wood glue, I shortend the end making it flat and noticed theese cracks. I asume their origin is tree cut issue and not driyng, my friend pushed the tree few times to fall (although I screamed - NO! šŸ˜€)

What you think?


r/Bowyer • • 1d ago

Snake in the grass

Thumbnail
gallery
75 Upvotes

First bow in a while. 62ā€ Osage with slight flipped tips - 60lbs at 27ā€. Backed with prairie rattlesnake. Deer antler for the tip overlays and arrow shelf. Stave had a natural gullwing shape which came through in the finished bow. Has taken about an inch of set after shooting it in.


r/Bowyer • • 1d ago

HEAT TREAT small FAILURE

Thumbnail
gallery
8 Upvotes

65inch Hazel bow was 28lb at 28inch draw, now after retillering it's 25lb; weak spot seems to look slightly more like a hinge and, as the cherry on top, string follow somehow got worse.

Those pesky knots have been fighting me non-stop, don't think I'll heat treat again for fear of either snapping or losing even more weight


r/Bowyer • • 2d ago

An unusual bow wood.

Post image
20 Upvotes

Hi, I’m from southeastern Mexico, and we’ll never find woods like elm or hickory here. I’d like to make bows out of local woods, but people always say to use American walnut, elm, Osage orange, etc. There’s a wood called JabĆ­n that’s very abundant in this area. Here are its mechanical properties—does it look promising?

We also have red cedar, mahogany, tzalam, etc.


r/Bowyer • • 2d ago

Trees, Boards, and Staves Narrow elm staves. Splicing & Design suggestions

Thumbnail
gallery
3 Upvotes

I’ve split a short elm stave and am left with two narrow staves. One is just under 2ā€ at the wide end, the other just over 1.5. The narrower of the two remains at 1.5ā€ for the first 12ā€ of the limb then naturally tapers. There’s also some twist etc.

My idea was to join them with a sleeve as my only attempt at a splice was awful.

I understand a typical sleeve fits over both ends, one slotting into the other, but has anyone done this with just one sleeve? A fence post, for example…

Also, given the narrowness, any suggestions for a design? The bow will be max 30 pounds.


r/Bowyer • • 2d ago

HOW LONG SHOULD I LEAVE MY BOW TO REHYDRATE AFTER A LIGHT HEAT TREAT?

Post image
3 Upvotes

Hazel bow, 28lb at 28inch, 65inch full length


r/Bowyer • • 2d ago

just to explain my last post I was trying to imagine a birch bow capable of talking prey between the caribou and bison class anything thoughts

0 Upvotes

r/Bowyer • • 2d ago

Splitting after bending (help!)

Post image
9 Upvotes

So as can be seen, after attempting my first steam bending recurve, the grain lifted and split. Any advice?


r/Bowyer • • 2d ago

Fixable?

Post image
7 Upvotes

Tip overlay is cracking. Apparently there was an attempted apoxy fix. I would imagine it wouldn't be advised to shoot like this, but It's such a fun bow to shoot! (TEXAS RECURVES-Comanche-64#@27)

Thoughts or experience with this?


r/Bowyer • • 2d ago

hElp! I went a ring too far didn’t I….

Thumbnail
gallery
4 Upvotes

Hickory board, think I chased a ring too low on the right side, am I wrong or taking half the bow down a layer?


r/Bowyer • • 3d ago

HEAT TREATING HELP

Thumbnail
gallery
10 Upvotes

The bow is common hazel, 28lbs at 28inch, 65inch overall length.

I have started heat treating, but the speed at which the "toasting" has occurred has made me wary.

Am I actually just scorching it instead of properly toasting it?

The following picture is the result of 40 minutes of work:


r/Bowyer • • 3d ago

Violated rings and Bowyer tears - advice?

Post image
2 Upvotes

So i went though two growth rings while scraping away the bark, hacking at that raised knot with my draw knife like a mad idiot (rushing to finish so i could make dinner for the children) Can I fill it with glue or am I gonna have to back it? ( no ring chasing please - bows already where it needs to be thickness wise). cheers all.


r/Bowyer • • 4d ago

Bows I Got Two Manchu Horn Bows Today

47 Upvotes

51@34ā€
All natural horn sinew fish glue birch bark traditional wrapping


r/Bowyer • • 3d ago

Peering through the bow to find its purpose!

12 Upvotes