r/CNCmachining • u/MeltechPrecision • 3h ago
A plain brass sleeve can keep a screw from crushing a plastic housing
Put a screw through a plastic boss and ask one question: what stops the screw head from squeezing the plastic as you tighten it?
A compression limiter is a metal sleeve that gives the clamp force a path through metal. The threaded insert on the other side gives the screw something to grab. Both parts can be tiny, but they do different jobs.
The dimension I’d check first is sleeve length relative to the actual moulded stack. Too short and the plastic can still take too much load. Too long and the sleeve can bottom out before the housing is held firmly. Check the stack across tolerances before locking in the drawing.
I’m with Meltech Precision, a brass turning supplier. We’re evaluating brass compression limiters as a companion to threaded inserts. If you’ve used these in production, what caused more trouble: holding sleeve length or accounting for variation in the moulded boss?