r/CandyMakers • u/TheLoneComic • 5h ago
Huge candy factory fire in Indonesia
Unbelievable.
r/CandyMakers • u/TheLoneComic • 5h ago
Unbelievable.
r/CandyMakers • u/lordlors • 1d ago
I bought a digital thermometer for cooking. The recipe I found calls for 115-120C and should take about 5-10 minutes. It took me more than that and around 30 minutes mark, the temp is still struggling to reach high temperatures so I finally increased the number of the electric stove by one. It climbed beyond 110C and I was afraid of getting it burnt so I took it off the heat immediately.
Then when mixing it with the egg white, the recipe says to use low heat with no temperature specified and to mix it continuously for 30 minutes. To check if it's finally done, get a piece and put it in a cool water, it should become hard and brittle. That's what I did but around 15-20 minutes mark, the nougat was starting to get hard and sticky which makes it harder to stir even though if I put a piece of it in the cool water, it doesn't get hard and brittle. I saw videos of Spaniards making the candy and the nougat never looks like it's hard and sticky after finally putting it in the mold. So I just gave up and started to mix it with the almonds and put it into the mold. Struggled to level it and it was a chore to clean the utensils after.
I'm wondering if my mistake was that I still needed more time for cooking the honey and sugar where the temperature of beyond 110C should be consistent all around before taking it off the heat or during the mixing with egg white, the heat was too low/weak and so the nougat just started cooling off?
r/CandyMakers • u/TheLoneComic • 1d ago
I have a lot of relatives driving a goo way to my house during the holidays.
I want to make some simple candies containing espresso or coffee that will help them feel alert on the drive back.
What are some good guidelines for how much caffeine to put in a recipe for say a couple dozen candies and what makes for a successful incorporation as an ingredient?
Thanks and Happy Holidays to everyone!
r/CandyMakers • u/NewspaperGrouchy1505 • 1d ago
Anybody experiment with making their own chocolate?
I was going to give it a go and have purchased some raw beans.
However, most examples I found online use a form of tempering to help with texture. Often up to 72 hours.
These machines are quite expensive. Do you think I could get away with just using a stand mixer on a low setting?
Thanks!
r/CandyMakers • u/4-20blackbirds • 1d ago
Hi all. I'm looking for a supply of high maltose syrup (corn or tapioca) for a project. Right now I'm stuck with MOQs of a pallet/tote. Amazon only comes up with barley malt syrup. I'm fine buying a few buckets, but not a pallet because I'm still doing product development. I've reached out to at least a half dozen suppliers and either have zero response or minimum of a tote. Any leads?
r/CandyMakers • u/Blix_P_12 • 3d ago
I’m trying to make M&Ms, but I’m having this problem.
I have the chocolate centers. First, I apply a solution of gum arabic and water as a sealing coat, then I add the white layer, followed by the colored layer.
The problem is that when I apply the white coating, it creates a fine powdery residue (as you can see in the picture). The surface also ends up looking somewhat porous instead of smooth.
I’m using a 70° Brix sugar syrup, which means approximately 70 g of sugar and 30 g of water per 100 g of solution. I bring the mixture to a boil until the sugar dissolves, then check the Brix level and add more water if necessary to adjust it to 70° Brix.
For the white coating, I also add a very small amount of titanium dioxide.(maybe this is the problem, never tried without this)
During the coating process, I tried warm and cold air both same results.
I’m not sure how to get rid of the powdery residue or the porosity, or what I might be doing wrong.
I’m also having trouble with the colored coating afterward. It doesn’t come out smooth either, or anything close to the finish of a real M&M.
I’m including the recipe I’m using for the syrup. Any advice on what I might be doing wrong or how to improve the coating process would be greatly appreciated!
r/CandyMakers • u/dcbluestar • 3d ago
So I made another round of taffy using palm oil and sunflower lecithin instead of butter. Did a few things different this round. The flavor today is watermelon, I tried incorporating corn starch, and I took it off the heat at 245F. I tried the corn starch because it was the only difference between the taffy I’ve been making, and recipes I found specifically called saltwater taffy. (Another redditor asked me on my previous post if I could make it) That being said, I’ve also seen recipes calling for glycerin, so that may be a trial run for another day! One major difference I noticed is that when I set the taffy down after pulling, it would recoil slightly, which it didn’t do before. My wife tried the final product and we agreed that it definitely had a “bouncier” chew. I only did a half batch of what I typically make, just in case it was a fail. I used 1/2 tbsp corn starch, so next I’ll be trying a full batch with a whole tbsp and see what happens! Gotta love these successful trial runs, and I almost enjoy sharing the results even more!
r/CandyMakers • u/dcbluestar • 4d ago
Most regulars on this sub have seen my countless taffy posts, so just know they all contained butter. Which is fine for most people, but we want to make things for everyone! Plus, abiding with cottage law, there’s fewer allergens to list on our packaging. The reason this said second attempt is because the first attempt, using solid coconut oil, was an unmitigated disaster, lol. Everything I read said because it’s a “lauric fat” it can add a soapy flavor so it’s best to add the fat towards the end. I should add that this also requires us to add an emulsifier. Butter has its own emulsifiers, so it’s not necessary when using that. We settled on sunflower lecithin. Well the coconut oil didn’t seem to have enough time to properly assimilate into the mixture and I was left with an oily mess that went straight into the garbage. Not to mention the unmistakable smell of coconut. Then I moved on to palm oil, which has its own set of caveats. Mostly rainforest and orangutan habitat destruction. We found a brand called Spectrum that is both RSPO and fair trade certified and gave it a whirl! Since I could add the fat at the beginning with the lecithin, it mixed in nicely and the final product was pretty good! I did learn that it needs to come off a few degrees sooner than the butter version. This batch of raspberry was a bit stiff for our tastes.
r/CandyMakers • u/lordlors • 4d ago
I used an electric stove which has heat options from 1-7. Since the recipe calls for low heat, I chose 2. When heating the honey and sugar, there were no bubbles but since I can't clearly see the sugar anymore, I thought it was enough so I proceeded to mix it with the stiff peaks egg white. Stirred for just a few minutes before putting in the almonds.
After cooling down, I refrigerated it for more than 12 hours and then after warming it up to room temp, it never became hard and brittle, still soft and sticky.
I used an airtight container during refrigeration and warming up to room temp.
So I think my mistakes were:
Is this correct?
And for my last question, since what I have now isn't brittle and hard and might be undercooked, there's risk of spoilage, so better to throw it and make another attempt?
r/CandyMakers • u/RDTish • 4d ago
I have made caramels a decent number of times. Sometimes they come out amazing but I have had issues with the caramels sticking to the wrappers, being too soft or sticking to teeth. The temperature was always measured by thermometer and all ingredients weighed precisely. I can't seem to find what's wrong.
I really want to make some for Christmas gifts but notice I lost my confidence. Do any of you have tips and tricks for successful caramels?
r/CandyMakers • u/burnedflag • 4d ago
I did peanut butter, powdered sugar, and some sea salt, but it just tastes like a buckeye. I’m thinking I need to add melted butter and something to give it that grainy feel that’s in the cups. Anyone out there got a good recipe?
r/CandyMakers • u/Cold_Law_4243 • 5d ago
r/CandyMakers • u/Intelligent-Milk5672 • 6d ago
Anybody know how to make candy cigarettes at home? I’ve bought some off Amazon, & I just love the slight pepto bismol/wintergreen chalkiness. Just thought it could be fun to try. Thanks!
r/CandyMakers • u/CyberWolfWrites • 6d ago
r/CandyMakers • u/Healthy-Reception243 • 7d ago
Does anyone know how to make a good horehound candy that is soft? My dad has dentures and misses it since he can't chew it anymore. I'd like to try and make some. Thank you
r/CandyMakers • u/dcbluestar • 8d ago
Oddly enough, doing one cheesecake-themed and the other with cake was unintentional and didn’t dawn on us until after we were done. 🤣
r/CandyMakers • u/epidemicsaints • 9d ago
I'm always skeptical of these quick DIY's that overpromise but as soon as I started stirring it released a definitive Butterfinger aroma, which surprised me because whole peanuts chewed up with candy corn is distinctly Payday.
It's funny how things like this are more than the sum of their parts.
This is simply equal parts candy corn and Jif peanut butter by weight melted in the microwave. I made a very small amount with 15 candy corns and 2 tablespoons of peanut butter.
I did it all together at 50% power and stirred every so often, but if you did a large amount use a double boiler maybe.
It was a mess for a moment, but eventually it gets smooth and makes a dough that starts cleaning the side of the bowl. Rolled up in parchment and stuck it in the fridge.
The texture is not like Butterfinger - it's like VERY gritty cookie dough and makes a crunching noise when you slice. Butterfinger is so rock hard since the reformulation with the move from Nestle to Ferrero in 2019, so I actually like this better.
This could be classed up using the fresh ground peanut butter that's gritty, and adding finely crushed corn flakes. Natural pb might be too runny but you could prob use more candy and it would be fine.
Definitely a great use of discount candy corn and creme pumpkins, this is a must-do even if you hate those candies. It's tastier, easier, and cheaper than any no-cook fudge I have ever had.
I made this after seeing emmymade do it last night.
r/CandyMakers • u/Prairiedogdance • 8d ago
First off I want to say, “Hi“ and I’m so happy I think I found my people! Love the posts here! And I’m hoping someone here can maybe help me out.
One of the things I like to make are snappy pecan pralines, not the caramel creamy style.
I’ve been trying to track down a food-safe fold top envelope for packaging. I’d prefer it to be clear (glassine?) or at least a more transparent white parchment that I could seal with little stickers to box them up.
I need something a little sturdier than flimsy plastic baggies since they are a little fragile.
Any pointers to suppliers would be much appreciated!
r/CandyMakers • u/Shot_Dentist_1392 • 8d ago
I make these chocolates around the holidays (this is Valentine’s Day themed) and special occasions.
In the third picture I have a few 2 ounce bags I sell, but I price them at $7. Would you buy these for that price or am I overpricing them?
Thank you so much ✨🍫💖
r/CandyMakers • u/Belligerent_interloc • 9d ago
I make homemade almond roca and what I call “old school” fudge every year starting before thanksgiving and continuing through the holidays. They make excellent gifts for friends & family especially when you get the cute little Christmas boxes and tissue paper from the dollar store! This is my first batch of the season.
r/CandyMakers • u/pinkguy90 • 9d ago
I'm considering grabbing a sous vide basically for tempering chocolate. I adore baking at home but I am consistently stressed amongst other hobbies, so as much as I would love the experimentation and satisfaction of learning to temper chocolate the traditional way - I just want the path of least resistance.
I'm doing some simple chocolate barks, truffles and simple chocolate covered treats this Christmas using higher end grocery store chocolate. I understand the basics of the process of sous vide tempering - place in a sealed, waterproof bag and placed in sous vide water - change the temperature accordingly until chocolate is tempered - cut corner of bag or redistribute into a piping bag and voila!
A family friend has a vacuum sealer and some bags they're happy to lend me - is that the ticket for ease?
I'm asking home makers as the majority of results I'm finding are for cheffy types or patissiers.
I appreciate the help and insight and if you think this is a good or bad idea I'd be happy to listen, too! I just think a relatively inexpensive sous vide machine has a small footprint in my kitchen and will help make my life easier with better results than my standard non-tempered double boiler melting methods. Thank you!
r/CandyMakers • u/TOYMoose • 9d ago
Has anyone tried to use the Soda Stream in hard candy?