r/CarAV • • 18h ago

Recommendations Best apps for android ai box?

1 Upvotes

I recently added an ATOTO CB6 android ai box to my car, and purchased a sim card for it from my phone carrier (tmobile). I currently have Plex, Amazon Music, and Youtube, loaded on the CB6. Any other suggestions for video, audio, or car related apps you like that I should try?


r/CarAV • • 22h ago

Tech Support Fish smell?

Thumbnail
gallery
2 Upvotes

Had my subwoofer/amp installed around Halloween by a friend. We didn’t have time to mount the amp and make the wires all neat, and ever since then my car has been smelling like fish every time I bump some music. Wondering if something is overheating or I should place my amp somewhere to breathe?
And does anybody have any suggestions on where I should place the amp? And also how to stop the box from sliding anywhere in the trunk?


r/CarAV • • 15h ago

Tech Support How to get this out

Thumbnail
gallery
0 Upvotes

How do I get this aftermarket stereo out of my 2008 suzuki swift? I have tried shoving butter knives down the side but cant feel any click. How else am I supposed to get it out?


r/CarAV • • 15h ago

General Does anyone run carpcs anymore?

Post image
114 Upvotes

Mp3car.com has been shut down for a long time now but I'm sure there's still some people out there putting computers in their cars

..right? Or is that just me lol? Test fitting my dual monitor beelink minipc tonight before I get evertthing situated. My mp3 collection is over 100k songs so I couldn't exactly just store it all on my phone so I figured why not throw a minipc in there. Got 3tb of storage available right now and I'm working on building some apps to manage my system (leds, spectrogram, obd data, and more). Anyways if you've got a carpc feel free to share your setup!


r/CarAV • • 20h ago

Recommendations Are these Hertz Mille Legends 6.5s trash?

Thumbnail
gallery
8 Upvotes

The surrounds on these Hertz Mille Legends 1650.3 woofers have 3-4 little tears in the surrounds (about 1/2 inch each). Are they ready for the trash? Or would some E6000 fix them up? Not sure how easy would it be to replace the surrounds, if necessary.

Surprisingly, they sounded great in the car. I was not thrilled to see them in this shape. Unfortunately the inner part of the door cover was pressing on them causing these little tears.


r/CarAV • • 17h ago

Recommendations Does this defeat the purpose pf having tweeters pointing towards you?

Thumbnail
gallery
9 Upvotes

So I got a quoter for $1900 from sojnd in reach and then found someone one ebay for half that and of course trying to be cheap. I went with a guy on ebay.

It took 3 months with me badgering him and he had someone supposedly handling the communication while I guess he was in Vegas. And they straight up and said it was shipped despite it wasn't.

I felt like it was a scam so I told them I wanted my money back. And then Using my skills. I found his address and send is this your address? Then he said I has someone else handling this and they'll be clipped for this as I was away in Vegas. I didn't trust that he was telling the truth but he shipped it.

I ordered these August 28th and got them on Nov 19th.

So fast forward a I received while they looked ok I feel they were rushed and not the greatest and that the cut out was way too big and kind of wasted space. A 4" mid could probably fit instead of what I made clear was for a 2" mid a Audiofrog GB25.

While I could make this work there is fitting issues in the actual a-piller. And then I will have to ask a friend to 3d print something that will work for my 2" mids. But then as you can see in this picture the tweeter is blocked and then the fact I have an air bag in the a pillers.

So what should I do? Should I use these a-pillers and try to make them work or have new ones built. I spent around $837 after taxes on these. And if I go to sound in reach that means I will have to spend $1900 which in the end I've would have spent $3k a-pillers alone and then wait another month before he can start on them.

I am kind of burned out on this project and originally took my vehicle to JML Audio and they insisted I had to buy all new audio equipment speakers, sub, dsp, and amps because they weren't an authorize dealer which would turn a 3k install to 7k-12k install. They even refused jusy making a-pillers. So I said find I'll do everything myself and this happened. With me getting in arguement with someone on the phone at JML because he said mids don't work well in some cars which I thought was BS.

I am just thinking of giving up and just giving a audio shop a blink check book and saying do what I want as I jusy want it done. I mean ran the wiring put deadening in the doors and installed my gb60's as well as putting resonix on the roof.


r/CarAV • • 18h ago

Recommendations Amp Board Wiring - Can You Improve this?

Post image
2 Upvotes

Yellow tape = two 4-ch RCA cables

Green tape = two 4-ch speed wires, speaker wire

Pink highlighter = 4 awg to Rockford 600W amp…8 awg to Sony 320W amp

Green highlighter = gnd wires from amps run parallel to power wires..

Amp orientation is pretty much stuck due to 24x14 back of seat board space. (rear 60% seat back facing hatch in Subaru Impreza)

Struggling!!! I can find a way to keep the signal wires and power wires ideally separated so I’m attempting to cross them at 90-degrees… any advice is super appreciated..

Note: the angled fuse block is due to not wanting to put a 90-degree elbow turn in the 2 awg welding wire… so I have it coming in at à gradual angle.


r/CarAV • • 18h ago

Recommendations Recommendations For Metal Music

2 Upvotes

* **What are your goals for your car audio system - as loud as possible (SPL)? Sound quality (SQ)? Some combination of both? Describe to us how you want your system to sound.**

Looking for good sound quality and punchy bass for double bass in metal music

---
* **What vehicle? - year, make, model, type (coupe, sedan, SUV, truck, etc.)**

2018 Honda Civic EX Sedan

---
* **What is your maximum budget?**

$1,000 - looking for black Friday deals

---
* **Will you be installing the gear or are you going to a shop? If a shop is doing the work, does your budget include the cost of labor?**

Hoping to do it myself, happy to go to a shop if needed, budget does not include cost of labor

---
* **What gear is in your existing system? (Is it stock? List any aftermarket gear.)**

Fully stock

---
* **What is your country of purchase? Leave any finishing thoughts here.**

United States - hoping to find some good black Friday deals that will allow for high sound quality and punchy bass for double bass drums. I listen to metal almost exclusively and want a sound system that makes that style of music come to life


r/CarAV • • 18h ago

Tech Support What do i use to burn CDs for car players?

1 Upvotes

I know my Car player is old and doesnt accept wav or mp3 or flac or any of that, how do i burn music onto the cd to play in my car. I have all the album I want saved as mp3 and flac, so now how do i convert it to whatever cars use and burn it?


r/CarAV • • 16m ago

Discussion Identify this sub?

Thumbnail
gallery
3 Upvotes

A friend gave me this sub but we aren't sure what it is. It's a 15". I was thinking Massive Audio but can't find an exact match.


r/CarAV • • 23h ago

Discussion Car stereo cd vs no cd

4 Upvotes

What do you prefer. In my opinion originals cds sound way better than any streaming services. And I need a car stereo with a cd. What bout you?


r/CarAV • • 6h ago

Music/Video Sony WX-C88REC 2 Din CD/MD Receiver, Old School Japan

3 Upvotes

r/CarAV • • 8h ago

Tech Support Audi a3 2013

0 Upvotes

U006500
- Vehicle Communication Bus E
- Performance
- Permanent
Not long had my car back from inspection after a crash and my radio is showing no signs of life I suspect that the inspection people have unplugged my control module


r/CarAV • • 13h ago

Tech Support Need help and or advice looking to buy a head unit

2 Upvotes

I was almost sold on a good quality Alpine Alpine Halo9 iLX-F509 head unit
But it just dawned on me. It doesn’t have a turn dial for the volume…my stock head unit for my Subaru Cross trek it’s got one and I absolutely love it! I’m a really big fan of this. Has anybody been in this position? You think I should look for another company that has turned knobs, built into the screen or do you think I would just get used to it?