r/CarHelp • • 18h ago

how does my serpentine belt condition look / 2010 Infiniti G37

Thumbnail
gallery
0 Upvotes

I’m assuming it needs changed - if you can tell from these. Sorry the pics aren’t that great i had to angle a small mirror to show the side underneath.


r/CarHelp • • 3h ago

Headlights cutting out while driving, mainly when using turn signals (2014 Kia Soul)

2 Upvotes

2014 Kia Soul, 1.6L engine, about 143k miles.

This started a few years back. While driving with my headlights on, if I activated my turn signal, the headlights would sometimes cut out for a moment. The problem would come and go, sometimes going months without doing it. But it gradually got worse when it did happen. While my turn signal was on, the headlights would flicker on and off, and sometimes turn off for more than a second or two.

It didn't do it for the last year, but now is back and even worse. When driving even without my turn signal on, the lights will sometimes just cut out, mainly when making right-hand turns. Now it's doing it even when I'm stopped at a light with no turn signal on.

After the first year, I took it into a trusted mechanic and they weren't able to duplicate the problem. It went away shortly after so I didn't worry about it, but now it's causing noticeable issues.

I don't have anything extra connected to the car except for a dashcam that powers via the cigarette lighter.

Any suggestions for things to check? Thanks in advance.


r/CarHelp • • 21h ago

Honda CRV 2024 impossible belt loop

Thumbnail
youtube.com
1 Upvotes

This summer we went camping out of our Honda CRV. As I was loading it became clear that we were going to be over packed but I had to figure out how to keep everything safe in the back, so that when opened the back it wouldn't all come tumbling. So I pulled the center mounted belt down across everything and routed it through one of the tie down hooks at the rear. This set up did a good job of holding everything in place, and other than me completely burning the dump cake I'd planned for my wife's bday, we had a great time..

But when we got home I couldn't figure out how to undo this belt setup. And I kept trying now and then figuring at some point a lightbulb would go off. Guess what, it didn't. Now the belt is so locked that I can't unlock it, or get any slack to mess around. I'd love some ideas for how to solve this. Some points:

- the tie down hooks are welded on both sides to the frame, so I can't like slip the belt out that way

- the latch is definitely too wide to pass through the hook.

- the belt is locked tight.

This diagram explains my wife's theory of how I did this. I am not 100% sure if it's correct though.