r/CosplayHelp • • 19h ago

Wig How can I style my real hair like this?

Thumbnail
gallery
152 Upvotes

I found pictures of a wig done of Schneider from Reverse: 1999 and I really want to cosplay her but also I just love her hairstyle and want it in my everyday life!

I know I have to layer my hair, I have pretty thick hair so I usually get it layered anyways. The issue I’m having is that I don’t really know how to get the wave/swooping motion of the layers? I would assume rollers but I think my hair would be too short to properly roll and I don’t have time every morning to break out hair gel. I don’t mind if it isn’t like, 100% accurate in that regard I just don’t want beach curls (scrunch and go). So I am looking for maybe something i can do overnight? The artwork is more vague in that detail too so I think I can get away with it cosplay wise.


r/CosplayHelp • • 14h ago

Accessory Help finding this type of glove

Post image
69 Upvotes

Hello! I'm trying to find a glove like what we've mocked up here. The white is the hand itself, the dark is the glove. It's akin to a fingerless or hooked finger glove but the entire finger is covered.

Any help would be lovely!


r/CosplayHelp • • 6h ago

Are people still making their costumes from scratch ?

24 Upvotes

I know that sounds like an obvious question but hear me out. I dipped my toes into the cosplay community about 12-13 years ago and really enjoyed the online community and the building of costumes and recently I’ve been curious about getting back into the community and doing a few builds and maybe my algorithm is just off but I haven’t really been able to find many clips or videos or profiles of people who still build a majority of their costumes now. I know there are some companies now who do full suits and 3-d printed helmets and masks and weapons but I’m just curious if there are still people out there that hand build and if so what are some good YouTube channels to follow for random costume builds, etc.


r/CosplayHelp • • 18h ago

Sewing My knees are already feeling awful and I haven't even cut out the entire pattern. As of posting this I'm halfway done. Is there a better position I could be in for this?

Post image
13 Upvotes

r/CosplayHelp • • 10h ago

Need help figuring out how to make satyr hooves that work for me.

Post image
4 Upvotes

Hello everyone! I was wondering if you all could help me out with a hoof design. You see I would like to be a satyr for next year's Ren faire. That being said I know the typical design for hoof shoes is basically a hoof block on the toe part of a heel shoe minus the heel. Or just a hoof piece you can strap on to your regular shoe. Here is the catch. I have joint issues that probably wouldn't mesh well with me wearing heels, especially ones without the actual heel. But I'm also a big animal nerd and it would bother me a lot if my costume based on a digitigrade animal didn't look digitigrade. I was thinking for the actual hoof piece I could do the strap on type hoofs, but have them be bigger so that they encompass more of the shoe. Where I need more help us figuring out how I can make what would be the ankle of the goat. I figured the upper leg could be achieved with padding but the bottom half has me perplexed. Thank you all in advance 😊.


r/CosplayHelp • • 11h ago

Prop Great Sword Cosplay Material Question? (3D Print, HD or EVA foam, etc.) (Monster Hunter Cosplay)

Thumbnail
gallery
4 Upvotes

Hey all!! With Black Friday sales having already started, I've been looking into ways I would like to go about making a prop great sword I've been working up to for a while (I have ref pics, model file, etc.) and I wanted to know what those who have done this before, or more generally just have experience with cosplay or cosplay props would think on how to go about making this. In particular, the two main methods I've been looking at for this project are either 3D printing, or HD foam (or EVA foam, I've just heard HD foam is better if I want it to look as high quality as possible or whatever?). I don't have a 3D printer, but my partner and I have been wanting to get one for a long time, and feel that this project plus Black Friday sales would be a good excuse to finally get one, and as a result, if you also have 3D printer recs, that would be greatly appreciated!! Any notes on how you might go about this, which approach would be best, and any and all resources or help or anything else you can give would be greatly appreciated! And thank you so much in advance!!


r/CosplayHelp • • 13h ago

Spitting "a few" eva foam dust particles even though wearing respirator?

4 Upvotes

I wore a half mask respirator with A2 filters and P3 pre filters. I did the positive and negative tests multiple times while stopping to take a break (inhale slowly while covering filters, mask collapses on the inside i feel like i cant breathe, push air out, mask returns to normal, try again mask collapses again. Then for the other test i cover the exhaust port and breathe out slowly, mask expands and i stop. Breathe again in and then out, same thing. I feel like i could break the seal if a breathe out harder/with more force, but i wont be doing that while just sanding foam)

I sand outside. Dust myself off as best as i can while wearing mask. Then come in, take the mask off, using a lint roller to collect as much dust as possible, take off my clothes and having a full bath to clear my hair too.

I cleaned my face with a baby wipe. blew my nose into a clean piece of paper and found 2-4 dust particles. Then I freak out cause of course, and starting intentionally coughing and a "big" particle comes out, alongside another 2-4 particles. Then i spit some more and i keep seeing 1-2 particles each time.

Now is this normal or am I being paranoid? I know that no filter is 100% effective, in fact P3 or N95 say they protect against 95% of the particles, and this amount of dust specks is significantly small in comparison to all the dust I m generating while sanding.

I just want to figure out if I m doing something wrong before it's too late. This is my second time sanding and I also used contact glue which if i m correct, is filtered by the A2 filters, and the p3 ones should protect against the dust.

(I have severe health anxiety but ling cancer is no joke so I m taking this extremely seriously)


r/CosplayHelp • • 1h ago

Sewing Help finding non transparent white fabric

Thumbnail
gallery
3 Upvotes

I plan on making this cosplay, I'm trying out sewing and i did kinda manage to make the top part but i didn't like the fabric i used.

Any recommendations on white/off white fabric that is absolutely not transparent? I didn't want to make a double layer or something because I'm not experienced enough with sewing and I'm just not sure it would work :/

Also any tips on sewing this outfit would be appreciated!! I wanted to make it a single piece but feel like thats still way out of my abilities so I'll probably make it a two piece (shirt & pants) and somehow sew them together lol. My main issue is with cutting the fabric so advice on that would be nice! Thank you in advance!


r/CosplayHelp • • 5h ago

Dyeing/ Staining Synthetic Wigs?

Post image
3 Upvotes

Hi! I'm currently working on a cosplay for a tiger tabaxi character and I'm having trouble constructing the wig. My current plan is to get an orange wig and dye or paint the stripes like you would when you dye hair but I'm not sure what sort of pigment I should get. I have experience dyeing hair so something with a similar consistency and staining process to hair dye would be preferred. I'm planning on using a tipping technique with foil so something incredibly watery might not work. I'm also planning on adding white to the sideburn/ front hairline so I can get fuzzy cheek tufts without sfx makeup but I'm not sure if adding wefts individually or if cutting apart a separate wig and sewing them together is the better option? Thank you! :)


r/CosplayHelp • • 13h ago

Armor What paint should blue paint should I use to get a metallic blue like the Avengers Age of Ultron Iron Legion helmet?

Post image
3 Upvotes

Like the title says I'm trying to make an iron legion helmet and I can't find a good metallic blue or a blue that will look good. I'm mainly trying to find a spray paint blue that will work. Any and all suggestions on what paint to use and how to get it metallic looking are greatly appreciated!


r/CosplayHelp • • 16h ago

Makeup astigmatism friendly lenses?

Post image
3 Upvotes

hello everyone :3 i’m not sure where to get toric lenses that are specifically all black like the photo, i’ve tried looking online, but can’t find SPECIFICALLY black toric ones. the closest i can find are partial rings around the outside, or literally any other colour. would love some help, thanks! :D


r/CosplayHelp • • 20h ago

Bendable tentacle arm

Post image
3 Upvotes

How can I make theae pool noodle octopus arms flexible but firm in the position I want them to be in? I want them to come out if my back and wrap around my front torso, similar to doc oc but on a smaller range. I have 18 gauge aluminum wire in there and made incisions where you see the black sharpie lines for flexibility but the won't loop around the way I won't and they revert back to their form after a couple minutes :(


r/CosplayHelp • • 2h ago

help with detailing

2 Upvotes

hello, im currently planning for my cosplay for the herta
however im stuck on planning how i want to do the detailing on her overskirt, especially since its pretty long.
ive seen people use htv, fabric with heat n bond or fabric paint. the fabric im planning to use is satin lux. which would be the best way to do these on that fabric?

thanks in advance!


r/CosplayHelp • • 10h ago

Wig How to Style Toji's Wig (JJK)

Post image
2 Upvotes

I am looking to style a wig by myself for the very first time and decided on doing Toji from JJK.

I know that you need a wig stand, hair spray and etc.

I'm just a little confused on stuff like crimping, steamer, and if I should use a curling iron (which I already have) and thinning shears. How do I also replicate his sharp bangs? What stuff should I actually buy and need?

Thank you!


r/CosplayHelp • • 17h ago

Double Kimono, Robe, or Just Outerwear?

Thumbnail
gallery
2 Upvotes

I wanted to cosplay Ryōshū from limbus company, I have her base outfit purchased already, however I wanna do/make her base E.G.O. look.

I’m curious, is she wearing two kimonos? I don’t know the formal name for the outerwear if it has one. As for the kimono itself I was thinking of buying a second hand one near or to match the colour of the one she wears. Also I am in need of any suggestions for lining cause I think I’d be pretty cool for practical use. This as well as an actual pattern for said outerwear. If anyone has tips or suggestions they would be greatly appreciated as I am new to cosplay. If I need to ask somewhere else L.M.K. Thank you friends.


r/CosplayHelp • • 21h ago

Sewing Looking for an (elven) leather jerkin pattern

2 Upvotes

Hi folks, I intend to go to a LARP as an elven ranger, and so I'd love to make a light leather jerkin, akin to the one that Legolas wears in the films.

I've taken a look around, but unfortunately the few concrete examples of a fitting pattern that I could find led to dead links or out-of-print magazines.

Does anybody perhaps have a suitable pattern, or knows where to find one?

Thanks for your help!


r/CosplayHelp • • 22m ago

Wig Making my first cosplay ever, need wig help.

1 Upvotes

I'm going to cosplay licorice cookie from crk. He has short dark purple hair. Questions here:
Do i NEED a steamer?
What glue can I use for making and applying wefts?
How can i make my wig stand the shape of my head?
How easily do wigs melt? (My only straightener's temperature can not be adjusted)
Will any hairspray work?
Does my wig have to be fully one style (helmet or the other thing) or can I mix elements of both?

EDIT: I'm from europe so some brands might not be available for me


r/CosplayHelp • • 3h ago

Cosplay Competition How do you come up with ideas for a performance ?

Post image
1 Upvotes

Hi !

I'm preparing for a contest next year and I (like always) struggle to figure the performance out. I know the steps in order to make a good perfomance but I can't find actual ideas.

I'm doing MaoMao, I tried to look up what other cosplayer did and found out it's in majority dance. Despite the fact their performance are beautiful I don't think dance is what I want to go for. I'm currently brainstorming but I feel like it's not going anywhere.

I'm completly stuck and it's like this every time I'm doing a performance.

Any idea, tips or recommendation would be very appreciated !


r/CosplayHelp • • 6h ago

How do I make my wig like theirs?

Thumbnail
gallery
1 Upvotes

I don't know how but their wig has more roundness that I want to achieve on my wig. Any other tips would be great too


r/CosplayHelp • • 6h ago

how can i achieve this hair on my own hair ?

Post image
1 Upvotes

I thought of hair clips and flocking/stuffing for the ice/snow, but there has to be a better way.


r/CosplayHelp • • 8h ago

Sewing Widening Tights?

Thumbnail
gallery
1 Upvotes

Got a pair of stockings for my Lupusregina cosplay, but...the stockings are way too small. I think I'll need to widen them. Any advice for a sewing newbie? Or is it possible to stretch the fabric enough to make it fit? 😅


r/CosplayHelp • • 14h ago

Wig How can I glue the hairs from my wig?

Thumbnail
gallery
1 Upvotes

Hello everyone, I have this helmet wig that I recently wore at a party and let's say it went too far and didn't go very well, some hairs started to come off and since I don't have much experience with wigs and don't want to make a mistake, I was wondering how I could reattach them to the wig? Any help is appreciated :)


r/CosplayHelp • • 16h ago

Armor Possible to Paper-Mache Foam?

1 Upvotes

Hi, I am planning to make a cosplay in the future, and I am wondering if there is a good way to paper-mache foam? In the past, I have had rigid parts bend on me, ruining the metallic finish. Is there a way to harden the foam so it will not bend? All I can think of at the moment is paper-mache. Thank you!


r/CosplayHelp • • 16h ago

Accessory Aiuto per la calotta del Ghost Rider Cosmico

Post image
1 Upvotes

Buonasera, sto controllando ovunque ma non trovo nulla per ricreare il casco del Ghost Rider cosmico...

Frega che le misure devono essere 30/35 in altezza e 25 in larghezza.

Avete consigli su come fare? Grazie


r/CosplayHelp • • 22h ago

Prop I have a plan for making a Caine (The Amazing Digital Circus) helmet with a cardboard box. However, I don't know how I can keep the mouth upright without it becoming flimsy due to the opening. Does anyone have any ideas?

Thumbnail
gallery
1 Upvotes

I thought about putting cardboard strips on the corners to keep the structure, due to an opening for the mouth being cut, but I don't know whether this will work. This might sound stupid but it's actually the first time I've tried to make a costume this complex. But I'm going all out because a few digital circus voice actors are gonna be at the convention I'm going to so since they may never turn up again (digital circus has finished) I'm seeing this as a once in a lifetime event. People have told me I've bitten off more than I can chew but quite frankly I've dumbed this down a lot, there are A LOT of Caine costumes that are more complex than the one I'm trying to build. The people who do this seem to have a lot of experience and time on their hands.

The eyes in options 2 and 3 are meant to be paper eyes in case there's not enough room to attach balls to the helmet. I plan to stick these on the inside of the helmet. The paper or fabric wrap around at the bottom of the helmet is so the rim will be comfortable on my neck.