r/DIYUK • • Apr 30 '23

Asbestos Identification The “Is this asbestos?” Megathread

195 Upvotes

Welcome to the Asbestos Megathread! Here we will try to answer all your questions related to asbestos. Please include images if possible and be aware that most answers will probably be: “buy a test kit and get it tested”.

DIY test kits: Here

HSE Asbestos information

Health and Safety Executive information on asbestos: Here

What is asbestos?

Asbestos is a naturally occurring mineral that was commonly used in construction materials. It is made up of tiny fibers that can be inhaled and cause serious health problems. Asbestos was used until the late 1990s in the UK, when it was finally banned. Asbestos may be found in any building constructed before circa 2000.

What are some common products that contain asbestos?

Asbestos was commonly used in a variety of construction materials, including insulation, roofing materials, and flooring tiles. It was also used in automotive brake pads and other industrial products.

How can I tell if a product contains asbestos?

It is impossible to tell whether a product contains asbestos just by looking at it (unless it has been tested and has a warning sign). If you suspect that a product may contain asbestos, it is best to have it tested by a professional.

How can I prevent asbestos exposure?

The best way to prevent asbestos exposure is to avoid materials that contain asbestos. If you are working with materials that may contain asbestos, be sure to wear protective clothing and a respirator.

What should I do if I find asbestos in my home?

If you find asbestos in your home, it is best to leave it alone and have it assessed by a professional. The best course of action may be to leave it undisturbed. Do not attempt to remove asbestos yourself, as this can release dangerous fibres in to the air.

The most significant risks to homeowners is asbestos insulation. This should never be tackled by a DIYer and needs specialist removal and cleaning. Fortunately it is rarely found in a domestic setting.


r/DIYUK • • Apr 23 '26 This Bravo

Advice If you're looking for a tradesman, check here

155 Upvotes

One thing that comes up on this sub regularly is people either struggling to find a tradesman or coming for advice after a checkatrade (or equivalent) cowboy has ripped them off. Having seen it happen a few times and replying each time with the same advice, someone suggested making a post that could be pinned to the top of the sub, so here it is.

The first thing to consider is that checkatrade/MyJobQuote etc.... are advertising platforms. They market themselves as consumer focused but they are not. If someone pays them to be on there they will be listed regardless of the quality of their work, and reviews will be curated in order to keep a paying tradesman on the platform.

So, if you can't trust those sites what are the alternatives. Word of mouth recommendation is always the best and is often trotted out here as if it's the easiest thing in the world to find, but for a variety of reasons many folk simply don't have that available.

It's not perfect (nothing is) but if you are struggling to find someone to do a job for you and you don't have a recommendation Trading Standards have a directory of approved businesses here:

https://www.buywithconfidence.gov.uk/

For Scotland use:

https://www.trustedtrader.scot/

There are various hoops that each business has to jump through to get listed here, and approved businesses are regularly audited to keep their listing. It's not a silver bullet, but if a business is willing to do the hard work to get listed and consistent enough to pass regular audit then you're likely to get a decent level of service overall.

It always grates on me to see good people get taken advantage of, and it can really affect someone's trust in others when they let someone into their home only to be let down, so hopefully this will help some of you avoid that happening and leave your faith in humanity intact. 🙂


r/DIYUK • • 48m ago

Project Before and after - daughter's first bedroom

Thumbnail
gallery
114 Upvotes

Finally came the time for our youngest to leave our bedroom and into her own. She got the smallest room which was being used as an office / dumping ground.

I'm a software developer by trade but always DIY what I can. I'm self taught and learned it all by watching YouTube. I put my existing painting and decorating and joinery/carpentry skills to use and also learned some plumbing for the new radiator. Hopefully it can inspire some people that it's possible to do this yourself!

Breakdown of everything I did DIY:

- Prepped and painted the walls with a two tone finish along with scallop stencil

- Paste the wall rainbow mural

- Removed carpet and installed laminate flooring

- New skirting

- Installed solid oak door and ironmongery

- Plumbed in new radiator

- New usb plug sockets and light switch

- New light fixture

- New curtain pole

- IKEA pax wardrobe

Just need to put the blinds back and fit some shelves but it's pretty much done. Took me ages as I was snatching an hour here and there while working full-time and the usual kids clubs.


r/DIYUK • • 5h ago

Renovating ground floor - remove wall or not?

Thumbnail
gallery
62 Upvotes

Currently renovating ground floor and looking for opinions on the layout.

It looks like there was a partition wall separating the entrance from the lounge, and the previous owner removed most of it but left this section sticking out.

Would you remove the wall sticking out next to the front door or keep it?

There's a step down to the front door.


r/DIYUK • • 3h ago

How many tape measures?

15 Upvotes

I have at least 3 tape measures I've bought and many more that have turned up free from elsewhere. But the question for all DIYers is how many tape measures does a DIYer need before he never finds himself standing saying "where the %%%k is my my tape measure" !


r/DIYUK • • 20h ago

Advice Update: Managed to get rid of the staining on my new porch, thank you!

Thumbnail
gallery
313 Upvotes

I posted on here a few days ago about my new oak frame staining the stone wall after heavy rain: https://www.reddit.com/r/DIYUK/comments/1xyp9e4/best_way_to_clean_stone_stain_caused_by_tannin/

Thank you to all the helpful comments and kind words. I managed to get rid of the staining today and just wanted to share some info and more pics:

  • The stain was caused by oak tannins (a natural acid)
  • I bought this spray, which is suitable for limestone https://www.amazon.co.uk/dp/B000IU3VT4
  • Washed down the stone with water and scrubbed lightly with a brush to get rid of the worst parts, then dried and sprayed with the stone cleaner, waited 30 mins, sponged it off
  • I'm prepared for more stains to happen again with future rain, but I just wanted to get rid of the worst of it for now

Also had a few people ask about the cost of the porch in the last post, so in case anyone's wanting something similar (I'm based in Stroud):

  • £2.4k for builder to take down old porch (shown in pics), do foundations, build stone wall
  • £2.9k for the carpenter to install the oak frame and fit roof
  • £2.8k for the oak frame from https://www.oakporchesonline.co.uk/ (would highly recommend them)
  • £800 for wall stones
  • £300 for coping stones

I'm really happy with how it's turned out in the end (still a few little bits left to do, like sorting the ridge tiles when it's not raining). It cost more than initially planned, as these things often do, but it'll likely outlive me, so money well spent.

Thank you again for the advice, it really helped! I hope this info helps someone else.


r/DIYUK • • 4h ago

Advice ADT refusing to give me the engineer code for an alarm system I own. Anyone managed to get away from them? (UK)

15 Upvotes

I moved into a house with an existing ADT alarm system covering both fire and security, and I'm having a nightmare trying to get away from ADT.

I own the house and the alarm equipment, but ADT won't give me the engineer code, which means no other alarm company can take over the system. So I'm effectively stuck with them.

I really don't want to sign up to a long-term ADT contract, particularly given their poor customer service, lack of responses to emails and complaints, and seemingly endless price increases. I'd happily pay another company to monitor and maintain the system if they actually provided decent service.

I've spoken to a few independent alarm companies and even had one come out to see if they could take over the system. Without the engineer code, though, I've been quoted around £2,500 to replace parts of a perfectly functioning alarm system. All just to get away from ADT!

Surely this can't be right? If I own the equipment, how can ADT effectively prevent me from using anyone else to maintain it? It feels like they're holding the system hostage, and I can't see why they'd ever bother improving their service when customers have so little choice.

Has anyone managed to get an existing ADT system taken over by another company without spending thousands replacing equipment? Would love to know who you used and how you managed it.

Also, does anyone know whether ADT can legally refuse to provide the engineer code? Has anyone challenged them on this or complained to Trading Standards, an ombudsman or another regulator?

I'm not trying to get free monitoring or maintenance. I just want to be able to choose who I pay to look after an alarm system that I own.

Any advice or experiences would be much appreciated.


r/DIYUK • • 18h ago

Tiling Somewhat regretting hexagons for my first ever tiling project

Thumbnail
gallery
180 Upvotes

I'm pretty pleased with how today has gone, but oh my days have I made it hard for myself, I've either got to construct a guide or I'm free hand cutting half the tiles!

They're merciless on the spacing too, because any variation in the cut half tiles on the starter course and it throws off the lateral spacing, so I had to rip them all down and start again after lunch.

Hexagonal tiles also means I get to do rather difficult cuts around sockets 🙃


r/DIYUK • • 5h ago

Advice Best way to fill this gap ready for plasterer?

Post image
17 Upvotes

Knocked the wall down separating the toilet from the bathroom, what would be the best way to fill the gap in the wall ready for skimming?


r/DIYUK • • 21h ago

Advice Sat in my loft rn trying to figure this out

Thumbnail
gallery
212 Upvotes

So I’m attempting to board my loft (after the trauma of stripping and re-insulating) and need some advice from more knowledgeable folk!

I’m using 300mm x 1220mm loft boards and 200mm loft legs to leave 30mm gap above my 170mm top up insulation. My joist gaps (centre to centre) seem to vary from about 40-43cm.

Will this joist variation be an issue?

The centre of my loft legs are 300mm apart along the joist, so each board corner is supported, but all other guidance and photos I’ve seen have the legs further apart, usually 500mm.

Is this just that I have small boards and 300mm apart is correct?

This means each board is supported by 8 legs. Does each board need this many?

I also have an 8-9cm gap at the back of the loft between the last joist and the wall. I’d like to cover this preferably, but if I pull the boards right up to the wall, the other end of the board doesn’t reach the loft legs. I wouldn’t mind but it’s only on half the loft, so one half would be up to the wall and one side would have a 3 inch gap. Not sure what I’m asking here but any advice welcome and appreciated.

Thank you in advance (I am fighting for my life up here)


r/DIYUK • • 4h ago

Advice Victorian coal cellar — what to do?

Thumbnail
gallery
8 Upvotes

I live in a Victorian terrace in London and we have an old coal cellar. It’s damp and has a low ceiling and concrete floor and is really dusty.

I’d like to make more of the space for storage, including the crawl space under the floor on the right of the pictures.

The surface under the floor is dirt and very dusty, so really looking for a solution to somehow cover the dirty so I can store things in plastic containers that can be slid in and out of the crawl space.

Has anyone done similar or got any advice.

Not looking to tank or fully decorate, just make it into a more usable space.


r/DIYUK • • 2h ago

Advice Parliament hinge installation??

Thumbnail
gallery
5 Upvotes

How am I meant to install this door hinge? When the hinge faces outside the frame the plates don't fold enough to 90o so won't close but if I flip it so the hinge is on the inside there's a huge gap.

Am I meant to recess the hinge into the frame the level of gap there is ~8mm? Seems excessive so I must be doing somthing wrong?


r/DIYUK • • 19m ago

Floor board lumps coming through new LVT

Post image
3 Upvotes

I recently had a company out to put a new LVT floor down and notice in the sunlight you can really see the uneven floor boards below. they put a layer of ply down below this LVT so I’m surprised you can see how uneven it is. I’ve asked them if this is normal and for them to rectify but wouldn’t mind others opinions. cheers!


r/DIYUK • • 36m ago

Advice Is this a big problem? Any advice appreciated!

Thumbnail
gallery
3 Upvotes

We moved into our house 9ish months ago. On the survey it mentioned damp on the chimney breast due to the house requiring a new roof. We had the roof replaced six months ago last month I noticed this which has gradually got worse. It doesn’t feel damp but is chalky to touch. Anyone any idea if this just from the previous damp drying out or if this is a bigger issue?


r/DIYUK • • 2h ago

What to do?

Post image
4 Upvotes

Hi all,

Looking for some ideas of how to tidy this area up. Not sure I need an electrician to look at the setup or just look to somehow hide it all away?

Any ideas appreciated.


r/DIYUK • • 1h ago

Electrical WiFi extension to garage

Post image
3 Upvotes

I’ve just moved into my mum and dad’s garage, and it’s too far away from the house for the internet from the router to be decent. I am connected to the house by a cat 5 data cable underground to an access point in the garage. I have bought one of these WiFi extenders, and my plan was to plug this mesh WiFi extender into the wall, and connect it to the access point with an Ethernet cable. This, however, hasn’t worked. Instead, it pings off of the router and tries to boost the WiFi (which I know is its job lol), but it’s too far away for it to properly work and give me decent internet. There is no appropriate mid point for me to plug this in closer.

My questions are:

Why didn’t this work (connecting the booster to the access point)

What do I need instead? A router?

EDIT: please please please answer like you’re explaining this to a 5 year old! I do not understand any of this lol. I just need something simple where I don’t have to muck around with it too much

EDIT 2: the garage is a separate building to the house

FINAL EDIT: thank you all SO much for your help and your patience, I’ve managed to put the extender into access point mode and things I think are all good now!


r/DIYUK • • 1h ago

Strip back and coat or just clad?

Post image
3 Upvotes

I’ve bought a house that needed a full renovation. I’m putting oak doors, flooring, skirting and architraves downstairs. The stairs are coated in 50 years worth of multiple layers of gloss. How can I strip or coat or clad the stringers? The treads will be carpeted.


r/DIYUK • • 1h ago

Gutter Leaks

Thumbnail
gallery
3 Upvotes

Last year we noticed a leaking gutter after a damp patch appeared downstairs in the hallway coming up from ground level. Our window cleaner put some silicone in the joint as a temporary fix. After noticing the damp patch again after some rain, I noticed water was running down the outside of the gutter so we had someone come out and they replaced the down section.

Unfortunately I can still see water running down the outside of the gutter and it's pooling at the bottom. Any suggestions on what needs fixing or repairing? I'm not sure if the water running down the outside is normal or not. I'm also concerned the roots from a bush have damaged something lower down (which you can see on the first picture).

Edit to add some info: The gutter is not well aligned (bottom seems too far away from the wall when compared to the top) and the down section bends as it goes upwards.

Thanks!


r/DIYUK • • 20m ago

Advice How to fix water here

Post image
2 Upvotes

Hi all - currently thinking about drilling a hole through the wall to let the water flow out. The other side of the wall is a path. Any other alternatives to fix this puddling issue? Thanks in advance for any tips


r/DIYUK • • 2h ago

Damp and mould under painted over wallpaper

Thumbnail
gallery
3 Upvotes

I’m preparing a wall for painting and found some damp part at the bottom peeling away. At some time since the 70s wallpaper was applied and painted over. The damn is limited as the cut away sections really are the extremes of where I can peel it off with my knife. The paper edges is where I can cut the underlying wallpaper away between paper layers, but no damp is delaminating it.

I’m concerned about the damp and what looks like mould.

HELP!


r/DIYUK • • 1h ago

Advice Chip in Shower Screen Glass

Post image
2 Upvotes

Hi all,

Just wanted to get people's opinion on this.

I'm fitting a new screen and there are some very little chips at the top of the screen.

They are pretty small but I'm replacing because the previous screen shattered so I'm a bit nervous about it.

Nothing to worry about or return it?


r/DIYUK • • 1h ago

Advice Washing machine drum squeaking

2 Upvotes

My washing machine feels like it's catching on something and is squeaking when turning.

Does anyone know how to check and potentially fix the problem?


r/DIYUK • • 1h ago

Bathroom vent draught

2 Upvotes

Can anyone recommend a good product to prevent draughts through a standard bathroom vent? Noticed this week how cold my bathroom is, I fitted a wind hood with flap on the outside, but still get noticeable draughts through the hole.
The extractor is new so don’t really want to replace, also something I can fit from the inside is preferred as not great on ladders.
Have the same issue with my cooker vent though which is accessible from outside, so recommendations for either internal or external fit appreciated!

EDIT: 1930’s with cavity so room to play with. Used grey 110 soil for the vent through so something that fits inside a 110 pipe if possible


r/DIYUK • • 5h ago

Advice DIY jobby here!

Post image
4 Upvotes

Dose blackjack normally take 48 hours to cure in this weather? It’s touch dry after 24 hour but can still push into it.

I plan on heating up felt and putting on top.. Is this correct? I’m concerned I may have messed up.

Thanks