r/DMR • u/hashoomix • 23m ago
TYT MD UV380 / MD380 Now Support P25P1 , NXDN 4800 , NXDN 9600 , DMR tier 3
Firmware Project Radiofoundry.com flash via google chrome webusb
r/DMR • u/SharkSapphire • Feb 08 '26
r/DMR • u/hashoomix • 23m ago
Firmware Project Radiofoundry.com flash via google chrome webusb
r/DMR • u/calirado303 • 3d ago
I’m looking to get a few 256 encrypted radios. I’ve been looking at the Retevis NR30D since you can program the radio with the Retevis free software but I have heard it’s not a true AES 256 encryption..? It’s that or I spend $500 on Hytera and get a certified encryption. Just not sure if that is worth it compared to the cost of the Retevis.
r/DMR • u/Thin_Dirt_6244 • 4d ago
Working my way through trying to program my digital radio. I sort of have the idea of programming the digital side, and uploaded a couple of analog repeaters as well, but with regard to simplex does one have to program every conceivable FM frequency into the radio?
r/DMR • u/thomhumphrey • 7d ago
As the title suggests, I have the correct cables - these are the PC76 for my BD505LF's and the PC63 for my PD505LF's. I have connected them to various Windows 11 and 10 laptops and PCs, with CPS and (what I think are the correct) drivers and no luck.
They're not even being recognised in Device Manager... interesting.
Trying to read radio information and config in CPS Unified Tool doesn't bring anything up and it's not giving the option for anything other than the default COM port.
I assume I'm being stupid here - has anyone experienced this and do you know how I can fix it? Got an event coming up so would be nice to use my radio fleet together... as I have pairs of radios that work with each other but they don't all work together as one group.

Status: Resolved with workaround
Radio: Baofeng DM-32UV
Radio Firmware: DM32.01.L01.048
Programming Software: CHIRP and Baofeng OEM CPS
Hotspot: Raspberry Pi Zero W with dual-antenna MMDVM HAT
Pi-Star: 4.3.10
MMDVM Firmware: HS_Hat.5.2
Network: BrandMeister
Configuration: Duplex DMR, Color Code 1, Time Slot 2
The Baofeng DM-32UV could successfully receive incoming BrandMeister DMR audio through a duplex MMDVM hotspot but could not reliably establish an outgoing repeater link.
Symptoms included:
The following messages appeared when attempting to transmit:
Invalid Downlink Activate received from 1
DMR Slot 2, RF user 1 rejectedThe radio's registered DMR ID was 3229405, but MMDVMHost repeatedly interpreted the activation traffic as originating from ID 1.
The original CHIRP configuration appeared correct:
After modifying the DMR Radio ID list directly on the handheld, the hotspot began successfully recognizing outgoing transmissions.
Reading the working configuration back using CHIRP revealed two populated Radio ID entries:
| Entry | DMR ID | Name |
|---|---|---|
| Radio ID 1 | 3229405 | KM7IJZ |
| Radio ID 2 | 3229405 | KM7IJZ |
The same two entries were subsequently confirmed using the official Baofeng CPS.
Critical observation: Removing Radio ID 2 caused the original RF user 1 rejected error to return.
Restoring Radio ID 2 with the same registered DMR ID restored successful transmission.
This behavior was reproduced and appears to indicate an internal Radio ID assignment, indexing, or codeplug compatibility issue.
For the tested radio and firmware:
This is a workaround observed on one tested radio, not a universal requirement for every DM-32UV.
Following the correction, MMDVMHost reported:
DMR Slot 2, received RF voice header
from KM7IJZ to TG 91
DMR Slot 2, received RF end of voice
transmission from KM7IJZ to TG 91,
0.7 seconds, BER: 1.2%,
RSSI: -47/-47/-47 dBmThis confirmed successful RF reception and DMR voice decoding by the hotspot.
The log does not independently establish successful downstream BrandMeister audio routing.
The exact underlying cause has not been conclusively determined.
Possible explanations include:
The OEM CPS confirmed both stored IDs but did not conclusively identify which entry was referenced by the working channel.
The findings should not be interpreted as proof of a CHIRP software defect.
If your DM-32UV receives DMR audio but fails to activate an MMDVM duplex hotspot, inspect the MMDVMHost logs.
If you encounter:
Invalid Downlink Activate received from 1
RF user 1 rejectedverify the actual Radio ID entries and channel identity assignments.
If your configuration exhibits the same reproducible behavior, consider testing the duplicate Radio ID workaround after backing up your original codeplug.
Do not change the registered DMR identity, disable encryption protections unnecessarily, or leave the hotspot in public mode.
This particular DM-32UV repeater-link problem was resolved by correcting the radio's DMR ID list and retaining duplicate entries for the registered identity.
The result demonstrates that an apparently correct channel configuration in programming software may not fully reflect the radio's effective DMR identity during repeater activation.
73, KM7IJZ
i'm pleased to introduce xombe and xombe-stick, for encoding, decoding, and transcoding digital voice in D-STAR and DMR. released under the MIT license.
xombe is a C99 library implementing AMBE 2400 (D-STAR) and AMBE+2 half rate (DMR) voice codecs. xombe-stick is firmware for the raspberry pi pico 2 that transforms it into a stand-in for a ThumbDV and similar USB sticks. it can do three full duplex channels simultaneously.
https://github.com/x0rro/xombe
https://github.com/x0rro/xombe-stick
down with proprietary junk, open source for all!
r/DMR • u/DistinctOffer9681 • 11d ago
I just got my DMR ID and looking forward to getting my first DMR radio for Christmas hopefully. However, after monitoring the one and only nearby DMR repeater near me, I noticed the ONLY TG being used is 93. I only known this from monitoring on my poloce scanner. However, does this mean that I could only use this one particular TG on this repeater or would several potential DMR TGs be available for use such as some Worldwide TGs? I am just curious if typical DMR repeaters allow several different TGs to be used?
r/DMR • u/Traditional_Ear9147 • 12d ago
Hi, I’m Enaldo (PU2VZF), a ham operator in Brazil. I’m prototyping OMNI·ONE, a base station that lets a DMR handheld send commands to an automation system. The idea is to check a sensor or control a device from the handheld and get a response over the radio.
The handheld operator can use it without an internet connection as long as they’re within radio coverage of the base. Here’s a short demo of the project:
https://www.youtube.com/watch?v=LmXntpsCl5c
If you already use DMR, what would you actually want to check or control from your handheld? And what radio model are you using?
73, Enaldo · PU2VZF
r/DMR • u/reddit-Kingfish • 14d ago
Firmware and Change Log can be downloaded here: http://www.wouxun.us/category.php?category_id=94
r/DMR • u/MaplewoodGeek • 18d ago
I recently setup a Pi-Star hotspot using a Pi Zero 2W with a duplex hat. I registered for the Pi-Star forum (forum.pistar.uk). I received an email acknowledging my registration and that my account is inactive until it's approved. It's been 4 days, and my account has never been approved. Does it usually take this long?
I was able to solve my issues with a lot of searching and watching videos. I'm currently running in simplex mode, and everything seems good.
The last thing I needed to get it working well was to do a calibration. My BER was 6-10 before calibration and 0.2 to 0.4 afterwards.
r/DMR • u/Jan1north • 21d ago
I've wondered about this for quite a while... why can't the hotspot do the A-to-D/D-to-A conversion rather than the HT you use with it? I found such a device available from K0NNK - the Allnode Plus. With any FM/analog radio the device works with all the digital voice modes DMR, YSF, D-Star, Allstar, M17, P25, etc. I've finding operation is much simpler and configuration easier. For example, no CPS and code plug needed to work DMR talk groups. Simply set your analog FM radio to your hotspot frequency. In the web page hosted by the device, choose your mode (DMR, YSF, D-Star....) and talk group (reflector, room, server, etc.) and you're connected! Have a look here: https://k0nnk.com
r/DMR • u/Dense_Coconut_5133 • 24d ago
Hi All, I am currently looking for a DMR radio, just getting in the world of Digital Radios.
I noticed that DMR Radios seem "rare" in some ways, which is strange considered that the restrictions for a DMR Radio are the same of a normal analog radio (at low power levels at least)?
Most of the 3G "global" radios are even cheaper and easier to find than DMR, which is nonsensical to me.
Just confused, thank you
I'm new to digital radio. In the last three months I have bought a Yaesu FT-70D. In the last two months I have purchased a raspberry pi using Pi-Star. Shortly afterwards I created TGIF 24598 and then I decided to host my own YSF talk group as well. So I subscribed to a VPS on IONOS.
I managed, with the help of ChatGPT, to create and host my own YSF 24598. It didn't stop there, lol. I want to bridge the two together solely by software through my VPS using Debian 13 (Trixie). I know NOTHING about Linux. Give me windows any day. Unfortunately, even on a "windows server" you still have to run Linux with special software at that. Plus you have to purchase a Microsoft license. I'm stuck with Linux.
Ok the YSF 24598 talkgroup is intact now. It works perfect. The bridge software is installed and working as well. Ok here we go, buckle up (lol).
If I use my pi-star on ysf 24598, I do come out bi-directionally but only if I'm using VOXDMR app for Android on my phone. If I use any other app, it doesn't work. Specifically, QSO1 android app. This app I can hear from YSF to TGIF but not TGIF to YSF.
I could continue using Chatgpt but I'm exhausted. What I have now is about fifty hours of copying and pasting from ChatGPT to my SSH on my VPS then testing. This AI is nice but it's astronomical amount of typing, copying and pasting. So now I'm calling Linux 911, please dispatch assistance.
There has to be an easier way, and I need tons of guidance. Thanks in advance and 73's de KJ4OHN
I love my Baofeng DM32 for the hardware, but the firmware has always been a bit lacking for amateur use, so I've been working on modifying it to be a lot more friendly for amateur users. Basically, I'm trying to make the Baofeng firmware look and feel like OpenGD77.
It's still early days, but I've just released 1.2.0 for public use https://github.com/pskillen/mm9pdy-firmware
Features:
Note this is still quite early in development! I've never bricked a radio, but there's always the chance.
There's also an Anytone D890 version in the works, same features but obviously with the Anytone firmware as a base
r/DMR • u/Rangeland-Comms • 29d ago
Just finished this RoIP gateway build.
Major System Components:
-Hytera HM782 w/ IP Transit license
-24v LiFePO4 from Bioeno
-Starlink Mini
-GL.iNET Router
r/DMR • u/mrstone072003 • Oct 13 '26
Can anyone point me in the right direction. I had purchased the retevis rt73. I absolutely hate it. It is programmed to power on when powered, it mostly does not turn on when the vehicle turns on. The UI is terribly awkward. Having to press a button to change the volume is weird. Also the mic seems to be so cheap and poorly made the audio is always terrible.
Can you recommend a good quality dmr mobile radio?
r/DMR • u/PretorianJ • Oct 10 '26
Dear All Hello,
Just got my BYD Seal U DMI.
I am an amateur radio Operator/Ham Radio.
I started thinking about how to install a ham radio into the car and I was wondering if any fellow Operator has done so. I looking for ideas.
How to place it,mount it, power it... etc.
Any ideas or suggestions welcome.
r/DMR • u/Draigtienne • Oct 06 '26
Having trouble getting this to connect.
I am running Windows 11 Pro
I have entered all the information it has asked for and still won’t connect even to the AMBE server.
I have deleted the app and restarted several times also to no avail. I don’t know what’s wrong.
On UHF/VHF, we say <call sign> monitoring. On HF, we call CQ. On DMR, is it just <call sign> listening on <talk group>?
Im hearing that sometimes. Though On WWE and WW, it is often a call for a specific call sign.
Am I understanding the etiquette
I'm happy to log some of these QSOs, especially for people in other countries. What do I put, though, for the frequency? Should I use the frequency of my hotspot? What about the talkgroup? I have been putting it in the Notes. What are others doing?
r/DMR • u/IncreaseIndependent • Oct 01 '26
Hi everyone, I’m looking for some advice on a radio setup for two different environments.
I am a firefighter and I also work at a company that uses radio communications. As a firefighter, I need VHF, but my workplace uses UHF. Currently, I carry a Motorola DGP8550e (XPR 7550e equivalent), but I really want to switch to a single dual-band DMR radio so I don't have to carry two devices around.
Here is the catch: my fire department's digital VHF channel uses Motorola’s proprietary Basic Privacy.
I happen to own an old Baofeng DM-1701. I know it has a "basic privacy" setting in its software, but from what I understand, it uses a completely different encryption/scrambling method and is not interoperable with Motorola. I also looked into flashing it with OpenGD77, but I found out that OpenGD77 strips away all privacy and encryption features entirely.
Is there any workaround or any way to achieve cross-compatibility with Motorola Basic Privacy on a dual-band radio? Are there any other dual-band brands/models (like Anytone, TYT, etc.) that can actually talk to Motorola radios using Basic Privacy?
P.S. I have the official codeplug from my DGP8550e with all the parameters, frequencies, color codes, and talkgroups ready, as it was programmed for me at the fire station.
Thanks in advance for any help!