r/DodgeRam • u/FakeName199 • 13h ago
My 2015 Laramie
Nice to be back in a truck since my financial hardship that happened back in 2023.
r/DodgeRam • u/FakeName199 • 13h ago
Nice to be back in a truck since my financial hardship that happened back in 2023.
r/DodgeRam • u/Justforfun61126 • 11h ago
Do the (2004) hemi valve cover bolts come out fairly nice, or do they like to snap off in the heads???
I have been fighting a no code shitty running engine for awhile now. I've thrown plenty of parts at it. Now i want to pull the valve covers and see if all the rockers are moving. Theres no lifter noise to indicate a bad lifter, but I want to look anyway.
Originally I thought it was a fuel pump issue because I put a gauge on it and only had 5psi. So I put a new pump assembly in and got the proper fuel pressure back, but it still runs like crap.
I've done the fuel pump, plugs, coils, wires, injectors. No codes to go off of. Confirmed the cam and crank sensors are ok. Thermal temp gun on the exhaust says 1 and 7 aren't firing. I also confirmed the cats aren't plugged.
Im losing my damn mind. This truck went from driving perfect to running like crap in less than 10km.
What haven't I thought of??? What sort of hammer should I use???
r/DodgeRam • u/WaltParPodcast • 18h ago
Tim Easterdahl of Pickup Truck +SUV Talk - PUTT finds out there was a lot more done than just a computer adjustment before the 6.2L Hellcat went into the Ram 1500 TRX SRT and the Rumble Bee SRT.
r/DodgeRam • u/Playful_Emu • 1d ago
I have an 07 2500 4wd 5.9 and I ordered the BDS 3 inch lift kit. The sway bar links that came with the kit were eyelet style but the ones on my truck just pass through. From what I can tell I'm supposed to have the eyelet style and not the ones on my truck. Has this happened to anyone else before? Do I need to find the correct bracket and weld it on the axle? Thanks
r/DodgeRam • u/VintageWerkes • 2d ago
Just listed. Check it out!
r/DodgeRam • u/WaltParPodcast • 2d ago
Tim Easterdahl of Pickup Truck +SUV Talk - PUTT sits down with Ram CEO Matt Van Dyke.
r/DodgeRam • u/Anytime__Anywhere • 2d ago
have a 2003 Dodge Ram 2500 with the 5.9 Cummins and about 157,000 miles. I recently did a lot of work on it. I did a new radiator, transmission cooler, intercooler, turbo, exhaust manifold… a lot of stuff.
One of the things I changed out is the power steering pump. I originally thought my front timing cover was leaking and causing an oily dirty mess on the front of my engine. Turns out it was actually the power steering pump. Something on it went bad and started flinging oil on my engine but it was so small and to be really honest with you it was a very slow leak. Fluid level didn’t change much at all.
So I ordered a Plew and Edeleman replacement pump that came with everything and was supposed to be a drop-in replacement. It even came with the pulley attached already. I had already changed the gearbox and a bunch of other lines back in March of this year when I did some steering work. The only line I didn’t change was from the pump to the hydro boost. Since I’m now changing the pump I changed the line. Changed the o-ring and all that and torqued everything to spec. Filled with ATF +4 like it says to and cycled the steering with the engine off to work air out of the system. Fluid dropped a bunch, kept adding fluid and eventually the air bubbles stopped and the fluid level remained steady.
At this point we fired up the truck and inspected our work and everything turned out fine except the power steering pump was whining pretty good even without turning the wheel or stepping on the brakes and activating the hydroboost. I figured there was some more air to work out and we cycled the steering and it’s just giving nothing but these micro air bubbles. The whine wouldn’t go away and no joke I cycled the steering with the engine off at least 150 times following the procedure to pump the brakes for bleeding the hydro boost and we’re at the same exact point.
I purchased a handheld vacuum point from Auto Zone. I know, I know, not the highest quality but it’s something at least and the first time I put it on it held a perfect vacuum at 15 inch pounds of mercury. Fluid level actually dropped a little bit. Added a little more and I guess some ATF got where the vacuum pump rubber fitting seals and now it won’t hold a vacuum no matter how much I try to clean it and dry it off. Fired up the truck and pump definitely sounds better but I intermittently get a sound of what sounds like air bubbles passing through the power steering/hydroboost system when I step on the brakes, a whine from the pump when I step on the brakes, and a whine when I cycle the wheel. Not as bad in the beginning but still there. The fluid in the reservoir when the truck is on is sort of a pink and foamy with micro air bubbles. I also tried drilling a hole in the old cap to attach a barb fitting to hook up the vacuum pump and of course since it’s an aftermarket pump they slightly changed the cap size and the original cap doesn’t fit on it and getting a replacement cap that fits is apparently not so easy.
With what I said in mind I think it’s air trapped in the system causing this as opposed to a bad pump, bad hydro boost or a leaking fitting. I checked all the fittings and they are tight and there are no leaks.
Is there anyone that has had this hard of a time bleeding the power steering and hydroboost system? All I keep reading is how it’s supposed to be a self bleeding system and I’m starting to think that’s a lie.
Some people are telling me there’s a liner that comes apart in one of the old lines but I didn’t really see any evidence of that when I changed the line but I guess it’s possible there’s small pieces I wouldn’t be able to see inside the hydro boost.
Any ideas would be greatly appreciated so I’m not loading up the parts cannon on my truck
r/DodgeRam • u/Particular-Key-8941 • 2d ago
Title question. 👆
r/DodgeRam • u/Successful-Bell-8595 • 3d ago
Hey, I have a 2005 doge ram and i can't get the heat to work since the engine wont get to the operating temp of 190, when i start it and let it idle it only gets up to 90 and when im driving it bounces beteen 165 when im accelerating and 160 when just cruiusing.
I tried to replace the thermostat since the guy I got it from had a napa thermostat in it so I put the genuine cummins thermostat in and it still wont get hot.
Figured I must not have put enough coolant in the thermostat housing since I had to top it off so I added more and burped the system to no avail, still is giving the exact same temperature readings
Thinking it might be a fan not circulating the air properly I inspected the fan while a buddy held the engine between 2000-2500rpms and it appeared to be functioning properly
I'm very new to this truck and ive been lucky to never have heat issues in the past so im just not sure what could be causing this issue besides what ive checked. Any help would be greatly appreciated
r/DodgeRam • u/NoAd9908 • 3d ago
I have a 2019 ram 1500 big horn. I have the toggle buttons behind the steering wheel. The buttons are hit or miss for me and sometimes wont toggle the next or previous songs. I use apple car play through the cord and i have also used it with a wirless bluetooth apple car play adapter. You would think on the wired option, it would happen less, but it happens just as much as the bluetooth option. Is it normal for this to happen? Is it a setting that i don’t know about?
r/DodgeRam • u/PristineTrade9644 • 3d ago
Hey all, looking for a bit of help here with my father’s 2003 dodge ram 1500 V6 3.7L
8th digit of the Vin is ‘K’
I was driving the truck yesterday about halfway through a 2 hour drive when the truck suddenly shutoff while coasting downhill (I noticed when the power steering was suddenly nonexistent and I was coming up on a curve). I was able to turn the truck back on for less than a mile, during which I experienced a loss of engine power. I put the vehicle in neutral, tried to rev hard, and the engine sputtered instead of firing up. I pulled the truck over immediately, shut it off, and it would not turn back on. Engine cranks, but will not turn over. Can record a video of this tomorrow when it is bright outside. My usual mechanic is not available for the next few days as he is full. Any and all help will be appreciated.
Information about the truck;
Truck has 313,000 miles on the body, transmission is a refurbished replacement.
6 brand new spark plugs, and ignition coils were put in 7/14/26.
Alternator, battery, and starter all replaced in May of 2026.
Vehicle was transported by boat to where I am about a month ago. All these repairs were done too far from where the truck is now to take back to them.
r/DodgeRam • u/professionaln00ber • 4d ago
r/DodgeRam • u/OkConfusionFriend • 4d ago
Accelerated to pass someone going 30km/h in a 60km/h and a cat ran out as soon as I was beside them so I hit my brakes right after accelerating kinda hard (rpm’s were at 4-5) and ever since then it’s had a weird sound
The sound it was making was like typical running engine sound but deeper
No tin sound or rattling, after 15 min of sitting parked I started it and no sounds
But this is the second time it’s happened so I know its gonna get worse lol
It’s an automatic truck so idk how the gears work but I can feel when it shifts, when I’m going uphill and it changes gears (usually the third time I notice the sound) the noise starts
Again tho
No dash lights no messages from system
Any thoughts?
It’s my bfs bush truck he lends me for work until I can afford my own but I’d like to help any way I can and he’s not back home for another week
Side notes
I drove home with no weird noises and now will not move it until it’s looked at
I didn’t hit any holes or run anything over that would hit engine
r/DodgeRam • u/WaltParPodcast • 4d ago
The new CEO of Ram Matt Van Dyke talks with Robert S. Miller of r/MoparInsiders previewing what can be expected when the American version of the Ram Dakota and Rampage debut in 2028 in North America.
r/DodgeRam • u/flapito • 6d ago