r/Dremel • • 15h ago

Beginner engraver tool suggestions here

1 Upvotes

I will start engraving mirrors and aluminum surfaces. Anyone who can comment about dremel and fanttik's rotary tools are welcome, if you used both and can compare them, even better!

I am looking for info about their uses, precision, easy to control or not etc.

I looked the tools up and dremel looks very bulky, is it hard to control and be precise with it?

I am open to suggestions about other other brands' rotary tools.

When you are commenting about a tool, please specify the model so I can look it up.

Also if you have any tips for a beginner, please share, thank you


r/Dremel • • 18h ago

What type of hand rotary tool would you recommend for a hobbyist watch modder?

Thumbnail reddit.com
1 Upvotes

r/Dremel • • 1d ago

2050 collet not unlocking

3 Upvotes

I got a 2050 from ace hardware about a year ago and have used it semi-regularly but not an extreme amount. Was using it for a longer project yesterday and the collet jammed and won't unlock. Makes a popping sound everytime I try to get it to budge. Tried wiggling the bit to get it out, using wd40 to loosen any stuck pins, nothing worked. Just emailed Bosch tools to try to get a replacement but kinda need it for a gift project soon, any ideas on how to fix it?


r/Dremel • • 2d ago

Best Dremel for tobacco pipe making

2 Upvotes

I don’t have room for a lathe or drill press and want to make pipes from native non-toxic hardwoods (I don’t live in the US so briar is impossible to buy or import due to bio security)

What’s a good Dremel - corded or battery - to get for this type of work?

Thanks in advance


r/Dremel • • 5d ago

What is this bit for?

Post image
10 Upvotes

I have 2 now, they come in assorted packs. I’ve tried to google them, and reverse image search, but I can’t find anything. They’re always next to the sanding shanks.


r/Dremel • • 7d ago

With a Dremel 200 Series can I use any accessories on it?

2 Upvotes

I brought a Dremel 200 series but it didn’t come with all the accessories so I was wondering if I need to buy accessories for this specific brand and model or can I just buy anything and it will work.


r/Dremel • • 8d ago

Drive cap for square flex cable (225) came with round hole???

Post image
2 Upvotes

is this a manufacturer defect?


r/Dremel • • 11d ago

Dremel 8250 making metal whirring noise...

9 Upvotes

I'm scared to use it like this. I only turned it on and off a couple times for the sake of the video, it's only at 10 rpm... Is this something I can fix myself or do I send it in for service?? It's just over a year old with moderately heavy use. Any constructive information or advice encouraged and appreciated, please and thanks!


r/Dremel • • 16d ago

People that engrave mirrors/glass where do you get your designs?

1 Upvotes

I've been engraving for a while now, just wondering where y'all are getting these cool traditional tattoo and medieval gothic high-res designs from


r/Dremel • • 16d ago

Help/Question: I think my Demel shaft is unbalanced

0 Upvotes

Hi all,

Got a new 4300 kit after being without a dremel for several years, 2nd time using it. this project i needed max speed. I dont remember my old 4300 kit have this much vibration.

On the new 4300, below 20,000rpm its fairly fine; however at 20,000 or greater, a strong vibration builds. without any accessory id say its fairly low volume however once i add any accessory to the shaft's end, the oscillation becomes much stronger, the shaft gets hot, and the noise unsettling.

I tried the flex shaft, helped a good bit to hold accessories steady but still the motor vibrates quite strongly at 20,000rpm or greater.

how likely is it i got a defective dremel? id assume the shafts go through a good amount of quality control before proceeding to market. I already started up an amazon replacement but curious if its just me being unfamiliar with dremels having not owned one for so long or if the demel is actually defective.


r/Dremel • • 17d ago

Halloween pumpkins

3 Upvotes

Halloween now being over, I’m thinking of being better prepared for next year. This year, I ’d thought to use my Dremel for fine detail when carving the pumpkin, but every bit I tried clogged (no real surprise). Has anybody ever found one that works? Thanks.


r/Dremel • • 17d ago

Spindle lock kaput

1 Upvotes

I have a Dremel 3000 and its spindle lock no longer holds. Now it’s impossible to change tools.

Has anyone fixed such a problem, or is the Dremel bricked?

TY


r/Dremel • • 18d ago

Is there a 1/8” finishing dremel for wood?

Post image
4 Upvotes

I’m trying to sand these interior corners more effectively than folding tiny pieces of sand paper or using foam pads by hand. I have a lot of them to finish frequently, so need something more durable and efficient than my own hands! They’re created on a CNC with 1/8” bit finishing pass.

I’ve found dremel finishing buffs which seem most optimistic since they’re flexible, but even they are 1” diameter. I think the narrowest sanding drums I’ve found are .3”. Is there anything out there I’m missing??


r/Dremel • • 22d ago

Can you engrave Tempered Glass with Dremel (Rotary Tool) ?

2 Upvotes

r/Dremel • • 23d ago

Dremel recommendations please for German shepherd nails. Mine smoked out, burned up. It lasted a year and a half.

Thumbnail reddit.com
5 Upvotes

r/Dremel • • 26d ago

Dremel 2000 Problem

1 Upvotes

I have my Dremel 2000 for about a month now and just newly it only has one power mode and that is the maximum power. Even if i put it on 1,2,3… it just always goes full power. What is the issue here and is it fixable. (sorry for maybe bad english)


r/Dremel • • 27d ago

I designed some compact workshop attachments for Dremel tools. What do you think?

Post image
8 Upvotes

Hey everyone! 👋

I've been designing and making compact workshop accessories for Dremel rotary tools, including mini router tables, cutting benches, and drill stands.

My goal is to make Dremel tools more versatile for woodworking, precision cutting, drilling, and everyday DIY projects without needing bulky workshop equipment.

I'd love to hear your thoughts! Would you use something like this in your workshop? Any suggestions for improvements?

I also have a small Etsy shop where you can check out my designs:

https://makerbros3d.etsy.com/listing/1262125649/dremel-cutting-bench-sanding-bench-flex

Thanks for taking a look! I'd really appreciate your feedback! 🙂


r/Dremel • • 27d ago

Recommendations on local dremel repair services

Thumbnail reddit.com
1 Upvotes

r/Dremel • • 28d ago

Dremel 220-01 press compatibility

3 Upvotes

Looking to get my daughter a Dremel 220-01 mini press for her jewelry making. I have an old Dremel 395. Will that mount to the 220-01? Are the collar sizes the same on a Dremel 395 and newer models, like the 3100?


r/Dremel • • 28d ago

Is this lock pin or spindle knackered?

Thumbnail
gallery
4 Upvotes

My collet lock keeps slipping so I've taken it apart to check it. The lock pin looks quite worn, but the spindle also looks quite gouged, is this normal for the spindle and I just need a new lock pin, or is the spindle cooked as well? Dremel 3000, by the way.


r/Dremel • • Oct 21 '26

Which is the right bit to use for a strike plate?

Post image
13 Upvotes

The hole in my door's strike plate needs to be just a little bigger. I was hoping I could file it a little to make it bigger so the door closes properly. Which bit would be the right one to use? It is a bronze strike plate.


r/Dremel • • Oct 20 '26

Fih

Post image
2 Upvotes

Repurposed my Dremel 8250 box for a fish bait container and didn't find any way to better mark it other than writing "Fih" under a DREMEL logo


r/Dremel • • Oct 20 '26

Dremel Down! Anyone Know What's Wrong?

Thumbnail
gallery
5 Upvotes

This is the Dremel 4300. I used it a fair ammount but nothing excessive. I definitely don't feel like I got my money's worth out of it. I was using it on floor laminate floor tile a week ago, it got really hot and quit working.

Tonight I replaces the motor brushes hoping it would fix the problem. They were easy to replace. I plugged it in and still nothing, it doesn't turn on.

I took the plastic shell off and nothing looks burnt up or damaged. Just curious if anyone has an idea to fix it.


r/Dremel • • Oct 17 '26

Second time using the flex shaft..

Post image
3 Upvotes

Are there any tips on repairing this or should I reach out to Dremel?
Second time I decided to use it and this occurs. -_-