This is the Cornison, my split based on foostan's Corne Cherry v3. It has a few extra keys in a Levinson-style bottom row, which is where the name comes from (Corne + Levinson).
What's different from a Corne
Left half: the 3×6 grid plus 3 thumb keys and dedicated Ctrl, Alt and Cmd.
Right half: the 3×6 grid plus 2 thumb keys and 4 arrow keys.
48 keys, hotswap sockets, Pro Micro, OLED, TRRS, and footprints for per-key and underglow RGB.
The case
The case isn't hand-modeled. A Python script (build123d) reads the KiCad PCB and builds the tray case, switch plate, MCU cover, plate spacers and tenting legs from the real footprint positions. If the PCB changes, the case follows. The plate also exports as an FR4 KiCad project, so it can be ordered from JLCPCB alongside the PCB.
The tenting legs screw into inserts in the case floor from below, so the tent comes off without opening the keyboard. They sit at 18°, and there's a tray in the middle for stick-on tire weights. This helps to keep it stable while typing.
Status
v1.1 is built and I'm using it daily. Both halves, the TRRS link, OLEDs, case, FR4 plate, cover and tents all work. RGB isn't tested yet. I don't really use RGB myself.
Printed in Prusament PETG on a Bambu P1S: Galaxy Black for the case, Chalky Blue for the tents and covers.
I used Claude (AI) to write most of the case generator and scripts. The design calls, testing and fixes from real prints are mine, and everything in the photos is built and working.
Hi, I'm experiencing some pain when I type a lot on my KC200MX. That's why I chose to look for an ergo alternative.
I'd like something as cheap as possible, with a trackball on the thumb cluster and preferably a display on the left half to see the current layout. My wife uses my computer from time to time and it would drive her crazy having to learn to type on this one without some kind of legend.
I have a 3d-printer and soldering experience, so hand soldering is no problem for me. Also, I don't mind wiring the switches by hand to save some money.
Could you guide me to a diy keyboard that ticks all my requirements?
I recently bought a custom Eyelash Sofle keyboard running ZMK, together with an Eyelash ZMK Dongle.
My setup includes:
Eyelash ZMK Dongle with an OLED display
Two nice!view displays
Joystick
Handmade horizontal roller
Dedicated 2.4 GHz wireless connection through the dongle
I'm experiencing a strange issue with the left half of the keyboard.
Initially, the entire leftmost column of keys on the left half wasn't working. After pressing various keys and experimenting with ZMK Studio, that column suddenly started working again. The keys now output the characters assigned to them in ZMK Studio.
However, the left half now has a severe input lag. Characters appear on the screen extremely slowly, approximately one character per second.
The right half works perfectly. It has been working correctly and at normal typing speed since the very beginning. I've never experienced any problems with it.
Additional information:
The problem appears to affect only the left half.
Both halves are connected through the Eyelash ZMK Dongle.
I updated the firmware on all three devices (the dongle, left half and right half) using the UF2 files provided by the seller.
Unfortunately, updating the firmware did not solve the problem.
I'm using macOS.
Has anyone experienced similar issues with an Eyelash Sofle and ZMK Dongle?
Could this be caused by a faulty left-half firmware, a wireless communication issue, incorrect ZMK configuration, or a hardware problem with the left half?
I'd appreciate any suggestions on how to diagnose and fix this issue.
Thanks!
---
I forked `PandaKBLab/sofle-j-keyboard-zmk` (https://github.com/PandaKBLab/sofle-j-keyboard-zmk) (the non-dongle / no-screen-receiver version), ran the GitHub Actions workflow, downloaded the firmware, and flashed it—and there is zero lag now. - Still testing... I also tried `PandaKBLab/zmk-sofle-j-dongle` (the version for the OLED screen dongle), and the lag was still there. So it really looks like something in the dongle firmware setup is causing the delay rather than the keyboard hardware itself. Another update on the left half: the issue is back where the far-left column of keys stops working. Sometimes when I reset/power-cycle the halves, all keys start working again, but then the lag/slow typing returns right away.
This happens with firmware without OLED dongle and also with the OLED dongle build :-/
Update: Unfortunately, it turns out to be a confirmed hardware defect on the left PCB matrix rather than purely a ZMK config issue.
Here is the breakdown of the hardware failures on the left half:
Far-Left Column Failure: The entire far-left column of keys randomly drops out and stops responding entirely.
Matrix Scan Hangs / Roller Triggers: When the left column goes dead, rotating the custom handmade roller (encoder) temporarily forces a matrix interrupt and wakes the column back up—but this immediately triggers severe typing lag and matrix loop stutter.
Hardware Stuck Key (Left Shift): The LEFT SHIFT key is now permanently registered/stuck at the hardware/PCB level, making the board completely unusable - restart helps.
Since both the vendor's provided firmware and clean upstream ZMK builds exhibit identical matrix loop freezes and stuck key behavior, this confirms a hardware/trace/diode defect on the left PCB.
This is Flan, an open-source wireless split keyboard I’m working on. In the video I’m using the 3D editor to try a few themes on Flan36.
Flan36 uses the same 36-key layout as my Piantor, my daily driver. My hands are comfortable on that board, so keeping the layout saved me a lot of trial and error. I’d always wanted to design a keyboard of my own, and going wireless gave me a good reason to finally do it.
The first batch of Flan36 PCBs, in black and white
These are the first PCBs for Flan36. I’m waiting on the remaining parts for the first build. I’ve got firmware and a few screen layouts ready to try, and I’m excited to finally see them on the keyboard.
I went down a rabbit hole with the layout and ended up with four sizes: 36, 42, 46 and 54 keys. I probably won’t use all of them myself, but they were easy to support while I was already working on the design.
Twelve UI prototypes for the nice!view displays. Each pair shows the left and right halves
The cases and magnetic display frames are 3D printable too. I just got an X2D, so I’m looking forward to trying different combinations. I’d love to see the cases, frames and mods people here design for their own builds.
AI deserves a lot of credit here. Claude and Codex were the two AI tools I used most during development. I knew what I wanted the board to do. With a clear problem and some direction from me, AI wrote better code than I could and worked through the technical docs in a fraction of the time it would’ve taken me. I honestly wouldn’t have gotten this far on my own.
I got into this hobby about 12 years ago with a WASD V2 87-Key. A lot changed for the better in my life this year, and after learning so much from people here, I wanted to share something of my own.
flankbd.com is where you can explore the designs and find the files to build one. I’m documenting the build as it happens on Instagram at eduarbo.lab.
Edit: A few questions keep coming up, especially about what I was trying to build, where the layout came from, and how much AI was involved. I skipped over some of that in the original post.
What did I want to build? A configurator where I could try ideas from boards I’ve used and see how they fit together before ordering PCBs or printing a case. For my own build, I wanted something wireless I could throw in my bag and go a long time between charges. I own a Corne too, but my hands are used to my 36-key Piantor, so Flan36 keeps its layout exactly. That layout comes from the Cantor. Keeping it let me stick with the mapping I know and experiment with cases, frames and firmware.
Once I decided to share the configurator, it made sense to let people add a number row, an outer column, or both. And if someone wants to take it further and put a trackball on the left, I’d love to see that Flan Napolitano fork.
Are you selling the keyboard? Nope. The idea is that you can put together the Flan you want in the configurator and it’ll tell you which parts you need and how many of each. I included links so you can see exactly what to look for, but you can buy the parts wherever you like.
Why three thumb keys per side? I’ve used the same 36-key mapping for years on my Piantor and my 3×5 Corne. The thumb keys do double duty. For example, I tap Esc or Tab to get those keys, but holding both gives me Hyper. That’s why I’ve never felt the need for a fourth thumb key myself. My QMK keymap and layer diagrams
Which models and tools did I use? Astra 6 through 6.2 in Codex, Claude Opus 5.5, and occasionally Fable 5.2, with reasoning effort set to xhigh. I gave them the requirements and constraints. They helped me work through datasheets, write the editor, and build the Python scripts that export the actual FreeCAD parts into the viewer. For the person who asked about the traces, I used Freerouting, then fixed clearance issues and ran the electrical and design-rule checks in KiCad.
What do you get when you hit Print? One 3MF with the parts you picked, their orientations and their filament assignments. Now that I’m printing mine, I’ve added a plate preview and a way to find themes that match the spools I already own. The case and switch plate each print in one color. The display frames can use up to four colors with an AMS, or you can print them in one.
Why screens on a battery-powered board? I picked nice!view for its low power draw. The firmware sleeps when idle and wakes on a keypress, and I want the option to leave both screens out for travel. When I do have a screen, I’d like to check the battery, see which computer I’m connected to, and see which keypresses registered. A few of the screen designs have little pets, too. Those are for emotional support haha.
TL;DR: I wanted to keep the layout I love and figure out what I’d build around it. I’m printing, assembling and documenting the first prototype now, so it felt like a good time to share the configurator. It’s still evolving, and you’re welcome to use it as is or fork it for your own build.
Alexei from Keebart here. I started Keebart about three years ago and it has been an awesome journey so far!
We normally keep our prices steady. Discounts like this are rare for us, so I wanted to let you know directly: up to 10% off our assembled split keyboards for Black Week. It applies to the whole build you configure, including your switches, keycaps and case. The keyboard configurators show the actual price for each build. No code needed.
One thing that’s new since we started is Keebart Studio, our free configuration app for macOS, Windows and Linux, currently in beta. You don’t need to own a board to try it. Pick a model and map your layers now! If you order one later, you can save that layout to the keyboard when it arrives. The firmware is still open-source QMK or ZMK, so Studio is a choice, not a requirement.
The offer runs 20–30 November 2026, while stocks last. It ends Monday, 30 November at 23:59 Berlin time (CET). Shipping and separately purchased accessories aren’t discounted.
Happy to answer questions here. You’re also welcome to join our community on Discord to chat with other split keyboard users or help us in further improving Keebart #studio.
I just wanted to share my first impressions about the Keychron Orca!
I am even typing this up on it right now!
First thoughts:
I am waiting to hear back from them to get a copy of the firmware so I can change some of the trackball behavior/sensitivity.
The trackball with default sesitvity took me six right to left scrolls to go from one side of my display to the other.
The trackball has just the right amount of rolling resistance IMO.
The touch pads on each half are honestly insanely good! very smooth and it feels... right?
easiest split keyboard to start typing on due to a more familiar layout.
The red switches feel great and the plastic body feels cheap ish but like it would be around 150 dollar keyboard, not a 50 dollar one.
By far is the easiest keyboard to travel with That I own, and being type C no extra cable is needed.
Has BT, 2.4, and wired connection.
the keyboard has a nice thonk and does not feel empty.
What feels weird?
Do note I have only been typing on this for about three hours so far and have muscle memory fighting me from the glove80 and ZSA voyager.
the shift key just feels odly low down for my pinky to reach, I am always hitting the tab where, where the tab and enter keys sit just feel so good.
I do wish there was one or two extra thumb buttons but when I get access to the launcher hopefully I can explore setting those M keys on the bottom right to things.
pressing f2 does feel pretty under the hand, so when trying to hold it down and press like the % key, it would be a big stretch for smaller hands.
at the moment that is all I can think of at the moment. So far would I say this keyboard feels like and is worth around 150 dollars? I would also say yes. The plastics feel very similar to the ZSA voyager but again the clicks sound much deeper.
and yes I do also have a pre-order in for one and plan to keep it based on my hands on expiernce with this one.
also no connection with them to make this writeup, I just want to share as many details as possible well the kickstarter is open for people to decide if this will be what they are looking for. I have never recieved any money from Keychron, just keyboards for testing.
Curious if anybody has used sculpted caps like KLP Lamé on a glove80? Really liking the layout so far but could stand to have the num/function rows brought a bit closer to my fingers.
I know mx sculpted boards like the advantage/dactyls work well with SA profile, but I haven't seen anybody use sculpted caps on a Glove80.
Hey, I am a newbie in need for a split kb because I am on track to develop RSI. I am wary of assembling myself, need it to be wireless and also the prices I can afford as a student are limited.
So, finding a matching keyboard has not been easy. Now I came across PandaKB and was wondering if this website is legit (any experience with shipping to EU?) and if the listing I found is actually a good price (it's slightly out of budget for me, so I want to be sure).
I was thinking ergodox as my new programming/gaming keyboard it has all the key positions I'm used to for gaming, default tab/caps/shift (relative to wasd), and has a nice three key thumb cluster for programming
EXCEPT (i realized) for ctrl
on a regular 60% it's 2u down and 1.75u left from the A key
the ergodox's lower left key is 2u down and 1u left, this would be way harder to hit with the side of my hand
I'm wondering if there's something similar (7x4 key main cluster, split, ortholinear, three thumb keys) on the market with a better lower left key for gaming
I'm looking for some advice concerning a transition to split keyboards. I'm currently using a TKL and a razer Tartarus, which is on the fritz. I'm thinking about transitioning to a split keyboard but not sure which is the right start.
I guess I'm a little concerned with the budget, I'm happy to spend £100-120, but want to understand what I'm getting. I've looked at KBS like sofle/lily 58, but neither seem to give the thumbs I'm after. I guess I'm asking is it worth committing to something more ortho with more of an adjustment, or closer to the Tartarus and iterating later, noting I have to learn layers and key binds. Maybe there is something with more thumbs that would work without a massive investment and relearn?
Hi, I have been using a Chocofi for a time and want something more robust. Any suggestions? I have looked into the Keychron one and a couple of the Beekeeb options.
Hi all, I am a complete newbie to the split keyboard/ergo world. Just like others, I realized I need a better setup to avoid small rsi problems getting worse. The problem is that there are so many options, and yet I don’t think I found one that fits all my requirements. Could you all help me come up with a short list?
Must haves: - split (of course :) - wireless - trackball on LEFT side - programmable via web interface (like vial)
Nice to have: - smallish - not a gigantic monster so I could potentially travel with it - lights are pretty :) - open hardware so I can easily make my own mounting mods with 3d printing.
I am open to ordering my own pcbs and soldering things but the easier, the better since I have limited time. Also, the trackball on the left is really important to me. I am right handed, but using a mouse or trackball on the right quickly leads to pain and a weirdly cold arm for me. I also just prefer the left hand for trackball control, no idea why. Also, I ordered a cheap corne to make sure that kind of reduced layout is a good option for me and that is working reasonably well but it needs retirement regarding the pointing device, this the question.
Any suggestions of ready built solutions or projects that might fit well?
I made a version 2.0 of my Smallcat unibody. Fixed a few things I was unhappy with after daily running the uni-v1.0 for a year, including making the two halves a bit closer one to another, a slightly smaller footprint, support for standard pin sizes, and of course, two cats, because its always better than just one!
I’m looking for an ergo that ideally connects via Bluetooth/dongle and has tenting to rotate the wrists inward. I have a bit of a case of golfer’s elbow and want to avoid lugging my LogitechErgo K860 around, which is pretty large and heavy.
There’s some cheapies on Amazon but they look like they wouldn’t last very long and are quite flat — since I can’t deal with the flatness/key resistance of Apple keyboards, somehow it’s very triggering to my elbow/arms at the moment, I’m not sure they’d be right for me.
Every repo now has a `zmk-v0.4` branch: **Displays:** zmk-nice-oled · zmk-dongle-display-view · zmk-oled-adapter · zmk-oled-brightness **Trackpads:** zmk-cirque-adapter · zmk-azoteq-adapter · azoteq-input-module **Layers & layouts:** zmk-switch-layer · zmk-switch-layout **Split sync:** zmk-peripheral-status-sync **Config:** zmk-config
It's a testing branch for ZMK v0.4 (Zephyr 4.1, LVGL 9), tested on my Corne‘s / Sofle‘s / Rolio46‘s. To try it: `revision: zmk-v0.4` in your `west.yml`.
If you use one of them, follow me and star that repo https://github.com/mctechnology17 Every follow and star truly motivates me to keep improving them. Thank you so much for the support!
So curiosity got the best of me and about a month and a half ago I bought the Moonlander, my first ever split keyboard after using the Sculpt for over a decade. It took a little bit to get used to it but I'm finally at the point where I feel like I'm about 90% as fast as I used to be. However, the real important part is the discovery of how much fun it is to completely optimize each and every keystroke lol. I mean I've always been that guy tinkering and messing with my Vim and tmux setup for over like 15 years now, but adding this dimension to it only allows me to take it to a whole different level. It's a blast!
I'm sure this has been asked many times, but I'm feeling a bit overwhelmed by all the options out there and would really appreciate some advice.
I've been using mechanical keyboards for years for both work and gaming. Right now, I'm on a 100% board with Cherry MX Silent Red switches, which I really like. A while back, I switched to a vertical mouse for work due to wrist pain, and that helped a lot. However, I still get wrist pain from typing on a flat board, so I'm looking to switch to an ergonomic keyboard.
My main goal is to avoid a steep learning curve with complex layers or completely new finger positions. I want a smooth transition that still improves my wrist health. I could do without a numpad but a numbers row is quite important (also for gaming). After digging through all the info out there, I narrowed my choices down to two options:
Keychron Q11 (with a separate tenting solution)
Dygma Raise 2 (quite hefty price tag)
Do these two make sense for what I'm looking for? I don't have the option to test multiple boards side by side, so I want to make the best educated guess possible. I am in EU btw. Thanks in advance!
Most screens I tried had more than what I needed. I only look down for a second, so I wanted to see what I care about.
Left side:
Battery
Connection type BT or USB
Which device I'm connected to (5 Bluetooth profiles)
Status: whether it's connected, disconnected or pairing.
Active layer: instead of a layer name, it shows a little stack of tiles. The one I'm on is filled, so I can tell at a glance. It draws one tile per layer in your keymap, so it adapts on its own.
Right side:
its own battery and link status, plus a wavy/earthy animation in the background.
No WPM
I dropped it. If I want to check my WPM, I'm practicing on a typing site that already shows it. I'm never looking at my keyboard for that number.
Battery friendly
The animation on the right only plays when it connects or resets, then it stops. The rest only redraws when something changes, so it shouldn't eat your battery.
Everything is pixel-drawn 1-bit icons.
It's an MIT-licensed ZMK module if you want to try it:
Settling on a 34 or 36-key split keyboard layout on a Glove80 (3 thumb keys feels like just a bit too much thumb-tucking so probably going with 34 keys).
Any thoughts on Urob's timeless homerow mods? From my brief search it seems like one of the most mature keyboard layouts. In particular, curious on experiences of those who have either tried other implementations of layouts that make modifiers more accessible from homerow as well as those who type fast (and therefore more prone to accidental triggers). Is this implementation considered well-rounded or highly opinionated? Any notable flaws and/or workarounds to deal with common issues?
Any other layouts to consider (whether a variation of homerow mods or a diferent approach like oneshot modifiers)? It seems oneshot modifiers might be a little more involved than some variation of homerow mods since you need to press, release, then press again for activation.
Any other tips like custom modifiers (e.g. mapping convenient keys like ; and , into a custom hold-tap which shouldn't be susceptible to accidental trigger because it's rare a letter immediately follows)?
For those who use Vim, what are your thumb keys? I assume it's common enough to occupy a valuable thumb key, leaving e.g. Enter, Backspace, Shift, other layer keys, Space, etc. fighting for the remaining thumb keys.Maybe the Enter key would be the least used and most appropriate to map into e.g. a combo key on homerow instead? My intuition is that combos or key chords shouldn't be relied on for an important function like Enter but I'd need more experience to tell.
I rely heavily on keyboard-driven applications like Vim, Emacs, tiling window manger, Tmux, the shell, fzf, and even use extensions for more keyboard-driven workflow on Firefox web browser. A lot of my keybindings involve modifiers (and often more than one modifier for a keybinding) for such applications. Currently still using traditional keyboard and Alt has been killing my thumb but trying to do some research and learn from others before committing to layout like Urob's implementation or any others people have success with. On traditional keyboard I have Tab act as Super key when held (modifier for my window manager) and the common Capslock to Esc/Ctrl. Since I'm switching to a split keyboard and might try Urob, trying an implementation of that for the traditional keyboard (still useful for the laptop).
Any tips are much appreciated. While it's personal preference, I trust that something popular (and therefore well-tested) would likely be more optimized than a noobie trying to build one from scratch.
Added a screen to my previous revision of this board. Still have some PCBs left if anyone is interested. ZMK COMPATIBLE and has a 600mAh battery on each half.