r/FenceBuilding • • 1h ago

Is this amount of flex normal?

Post image
2 Upvotes

Contractors used 16ga post master and claims it’s 3ft deep for a 6ft fence and said this amount of flex is normal for horizontal slat fences… posts are 8 ft apart not sure how to include a video so here’s a link! video: https://imgur.com/a/2kzWs87


r/FenceBuilding • • 1d ago

Modern, horizontal, recycled fence

Thumbnail
gallery
20 Upvotes

I've been a little reluctant to share this one as it's part of a bigger house restoration that I'm still working on. But hopefully some of you will appreciate it now.

I have access to scrap wood from a cedar mill that can be found in a huge range of sizes and quality. I used it to enclose the boat house on the side of this house that gives it sort of a glowing lantern effect at night. The width varies and is about an inch thick in some sections.

There is a large sliding section that opens and I'm planning on making some outdoor lanterns that mimic this pattern at night as well as some stand alone sections of fencing.


r/FenceBuilding • • 13h ago

Metal fence post angled due to giant root

1 Upvotes

I have a chainlink fence, and about 2’ from it is a giant pine tree. Over the years (before I even bought the house), the tree roots seem to have pushed one of the metal fence posts and now it’s at an angle, so the fence sort of bows out into the sidewalk. Is there any way to bend the post so the fence is straight (or at least more straight than it is now)? I can’t dig around the post due to the roots, so I feel like i’m in a pickle here. Is it possible to bend the fence post at the base so the top is straight? Thanks for any advice!


r/FenceBuilding • • 14h ago

A Pallet Fence for Now

Thumbnail
gallery
1 Upvotes

Bought a new house and our temp RV fence needs an upgrade. Not quite easy for a big investment just yet so I picked up some free pallets from the local Solar distributor.

Very pleased with the results considering I’m using mostly free materials. Eventually anticipate building something similar and more permanent but think this will get us through a couple of seasons at least.

40” tall, secured with 3” lags at every join, supported by 3’ garden posts behind the join. Swing gate at the end by the shop so that I can not hop the fence to get in (home office) and shift it over when I need to work outside.

Took about 2 hours to set up.


r/FenceBuilding • • 22h ago

Our latest composite fence transformation

Thumbnail
gallery
4 Upvotes

Our installer did an awesome job with this transformation. There was a 27 year-old wooden fence and some bamboo prior to the homeowners deciding to go with composite and aluminum. It came out great!


r/FenceBuilding • • 2d ago

First Fence Build...

Thumbnail
gallery
33 Upvotes

I do demolition and junk removal during the week as my full time job, but as the years have passed o have acquired some know how and have begun taking side jobs when I have spare time. Usually 2 or 3 a week. My buddy who I work with every day took the lead on a privacy fence job we got through a client at our work.

Fence was a decent size. About 300 feet all together.

This was my first fence job so I just really would like some feedback on this because some things look off to me. I wanted this to be a learning experience but I get the feeling a few things are off.

I'm going to post a few pics and see if anything catches your alls eye as "off". That being said, I'm open to any constructive criticism. Go ahead and light this project up. I appreciate any feedback!


r/FenceBuilding • • 1d ago

Post set in cement but is this too low?

Post image
4 Upvotes

Neighbour just had fence rebuilt, but I am worried that the cement is too low. There was some pooling of water during heavy rain. What should I do with these holes? More cement, drain rock, crushed rock, just dirt​​​​? I have no idea.


r/FenceBuilding • • 2d ago

Underground lines

5 Upvotes

The shared fence between my neighbor and I is being replaced. Company called 811 to mark the underground lines about a week before the project was to begin. Problem is that they didn't mark the work area in white flags like they were supposed to. The gas company came to mark the gas line and said it runs along that fence but they won't mark anything if the area isn't flagged in white. I called the fence company and emailed them about the issue. They weren't responsive. We've had some weather so the project was delayed. They finally came out to white flag the area yesterday. They want to start work this morning but the gas company hasn't been out to mark the gas line yet. They want to do the work without that and just hand dig the posts instead. Is that OK? What do I do here?

TLDR: Fence company wants to proceed with project without marking underground gas line. What do I do?


r/FenceBuilding • • 2d ago

Just leave it

Post image
3 Upvotes

Just leave it nooone will notice, it's in the back


r/FenceBuilding • • 2d ago

Need advice on how to fix this gate

Thumbnail
gallery
3 Upvotes

This guy my mom hired to come rebuild my gate that someone else built five years ago and did not build correctly or put a brace on and it sagged very quickly and then came out of the hinges and the old one was a double sided Pickett gate so it was way heavier but this guy built a single sided but I know it’s done wrong. Please tell me what I need to do, I have an idea but I want to do it correctly. The compression brace I don’t think it’s correct so it doesn’t sag and the henge areas I think screws need to go into post and some aren’t and the ones where he put wood in the gaps I’m not sure if the screw even reached the post because if he used the same screws as the ones that didn’t reach the post then the ones with the wood cuts couldn’t have reached the post either.


r/FenceBuilding • • 2d ago

Cedar grade 1 vs grade 2

Thumbnail
gallery
25 Upvotes

Getting a fence installed, I was quoted for grade 1 cedar and based on my research it has less knots and tighter knots then grade 2 and less color variation, but these look like grade 2. Can anyone help confirm? Is there an easier way to distinguish?

Also what is the proper way to cover the seams, the upside down dog ear looks weird 😩


r/FenceBuilding • • 2d ago

Rail height on uneven slope

2 Upvotes

Hello, I am installing a privacy fence at my house and having some trouble figuring out the best way to get the rail heights on an unevenly sloped yard. I’ve watched some videos, but there aren’t any really applicable to my situation. I would measure based on the height from the ground in front of the post, but I domed the concrete to the best of my ability around the 4x4 posts to allow water and soil to stay away from the post base. I did no measuring when I domed them.

Would it make sense to make a couple of spacer blocks and set them to the sides of the domed concrete and lay a 2x4 on top to get my bottom rail height? I plan to measure all the other rails from the bottom rail.


r/FenceBuilding • • 3d ago

The 8 bit recycled gate

Thumbnail
gallery
12 Upvotes

The funny thing about using recycled materials is that it forces you to rethink how things are built. In this case I was using scrap wood cedar that was being thrown away from someone else's fence project and had a some sheets of cut out galvanized metal so combined them to make a gate. It's very sturdy and double sided.

I call it 8 bit because it reminds me of early video game graphics like Space Invaders.


r/FenceBuilding • • 2d ago

Concreting post partially under existing neighbour's slab?

Post image
1 Upvotes

I'm planning to make a bifold gate with palings to cover my concrete driveway, with one side up against my house, and one side against the fence to my neighbours' place. It'll be ~1200 tall. I'd be using 100mm gal steel posts. The gate on the neighbours' side will be wider - 1800mm.

Question 1: The post will be right up against the neighbour's property (and his concrete slab, which is for his footpath). I want to avoid breaking up his concrete to concrete in the post, so I was wondering if I could dig under it on his side and concrete below it, but on my side of the property, have an exposed hole? See the left hand side of the photo for details.

Question 2: Also, on the right hand side, the post will be right up against my house. So I was thinking of digging a semi-circle hole and concreting in the post + drilling the post into the brick of the house.

Note: my driveway is concrete so to make the holes I'd be cutting into the concrete on both sides. Any thoughts appreciated!!


r/FenceBuilding • • 3d ago

Forcing a Shared Fence on PL

Thumbnail reddit.com
1 Upvotes

Our new neighbors have built a big house with a massive 2 full storey laneway at the back. Right at the get go they asked for a shared black metal fence on the property line. As our house is an old character home we said we preferred to keep our existing cedar fence. We said please build your fence on your own side.

We decided to get a survey which revealed 5 large panels near front of our property crossed over to their side by 3 inches. We informed them. They told us to remove at our expense. We said we would but wanted to ensure they’d be building theirs right away so our property wouldn’t be exposed to animals & intruders. They replied they’d start their landscaping right away. That was 5 months ago.

Our surveyors put in wood stakes to demarcate the PL boundary and they’re saying we must remove those, that they are taking 1.5 cm’s of their land. They’ve already managed to build their shared concrete retaining wall and black metal fence along the west side of their property but there’s radio silence on our side. Now they’ve sent us a demand letter for $15,000 saying we’ve delayed their construction.

Their problem is that they’ve built their laneway exactly 48 inches from our property line and with their required 36 inch fire path they’ve only got 12 inches for a fence. Don’t forget we still have the rest of our cedar fence still there. This builder and owner are stalling, bullying and doing everything in their power to force us into a shared fence on the property line and City of Vancouver will do nothing about it. Yes we hired a lawyer but it’s still unresolved. They excavated about a foot of soil where we took out our fence panels and now our walkway has eroded. I know we have a case for loss of lateral support but it’s a hassle to go to court. Does anyone have any sensible solutions or know a fence company who can install a fence from one side? We’re forbidden from entering their side.


r/FenceBuilding • • 4d ago

Barb wire? How old would you guess?

Thumbnail
gallery
284 Upvotes

r/FenceBuilding • • 4d ago

Fake Home Depot fence

Thumbnail
gallery
33 Upvotes

My neighbors installed a Home Depot panel fence, it's fine and gets the job done (right side of photos). I decided to just match it for this small back yard area in my yard but of course their panel size didn't fit my area so I made my own version to match.


r/FenceBuilding • • 3d ago

Replacement Slats

Thumbnail
gallery
2 Upvotes

I’m wondering if anybody can help me with the manufacturer of these slats. The panels are made of slats but each slat looks like it two individual slats. Only once you actually get up close and look at it can you tell the seam in the center is just decorative. I checked under the post caps but there was no information. I just need to replace a slat where the neighbor sent a baseball through it. The hole is centered on that decorative seam so I’m hoping it might be possible to just replace the single piece if I can figure out where to get it.


r/FenceBuilding • • 3d ago

Hot-dip galvanized 3D V-bend perimeter fence — coating, panel stiffness, climbing resistance (manufacturer, happy to answer spec questions)

1 Upvotes

The panels are hot-dip galvanized, so the zinc covers the wires, the welds and the post edges rather than sitting on top like a paint layer. V-bend ribs give the panel stiffness, the mesh opening is tight enough to make climbing awkward, and the welded joints are the load path under impact. Panels and posts ship ready to assemble. If you're comparing coating types or panel specs for a site, ask away.


r/FenceBuilding • • 4d ago

One way outdoor dog gate

7 Upvotes

Does anyone have any idea how I could install an outdoor one way dog gate. We have a fence around our garden but walk our dogs outside of the garden fence on our property. Some of the more energetic dogs roam around the property after the walk. It’s not a problem for us but I would like to install a flap/gate/fence that these last stragglers could use independently to enter the main garden. I have seen a wooden one at this link https://www.instagram.com/reel/Df2S85-uHut/?cnvx=MTdsNGdqbjU3aWQ3dQ== but I think it will be too heavy. Any ideas. Also before the criticism comes, we have 9 Thai street dogs that we rescued from abominable circumstances and my husband and I flew to France when we left Thailand. They are not neglected if they hang out in the field on our property


r/FenceBuilding • • 3d ago

Fence contractors and installers: what would actually make your work easier?

0 Upvotes

Hi everyone,

I’m part of the technical team at a Chinese fencing materials company. We’re planning to build a factory in the U.S. and looking for a competitive edge by improving installation methods—using robotics to reduce labor costs and make the work less physically demanding.

For example, we’re currently trying to develop a positioning device to help crews set fence posts without traditional string-line layout. We’re also planning local warehousing, with delivery on installation day and each section’s materials unloaded right where that section will be installed.

But we’re struggling to decide where to focus our development. We don’t yet understand which problems matter most to contractors and installers.

For contractors, which costs would you most like to reduce? For installers, which tasks are hardest to get right, which are the most physically exhausting, and which would you most like to improve?

We could really use advice from people who do this work every day. We’ve been feeling a little lost about our direction, and your experience would help us figure out what to develop next. Any examples from your own jobs would be greatly appreciated.


r/FenceBuilding • • 3d ago

Piece meal fence- worth it?

1 Upvotes

Is it worth it to piece meal a 270 ft cedar fence project. local lumber yard has #1 STK cedar pickets cheaper than fence companies selling #2 grade or better. struggling to find a reliable "install only" company or crew. I am getting consistent quotes of 12-14k for full package. material list for this is prob about 6k. I am on the east coast.


r/FenceBuilding • • 4d ago

Did my fence contractor mess up or do it right l?

Thumbnail
gallery
1 Upvotes

This question might be obvious, I’m not sure as I have very little knowledge about construction and just hire licensed people to help me. So, thank you in advance.

I needed a fence gate post replaced, and it sits very close to the house.

When they took out the old post to put in a new one, they cut into this concrete shown in the picture. Is this the house foundation footing that they cut into, or is it just extra concrete bonded to the house foundation from the original fence post installation?

And, the second picture is after the new post installation. Is it okay for the cement to be poured directly agasint the house foundation? I ask because it seems there is a small gap between the sidewalk concrete slabs and the house foundation , but here it is not.

Thank you.


r/FenceBuilding • • 4d ago Bravo

Cedar Fence

Post image
6 Upvotes

Looking for guidance on building a simple 6' cedar picket privacy fence. My sister recently bought a house with a small yard. One of the things that needs done is the wire fence torn down and a cedar privacy fence put up (300' roughly)

Ive only ever built rolled wire panel fences, meaning the only applicable knowledge I have is digging holes and setting posts. When I looked into cedar privacy fences, I was pretty quickly overwhelmed with the sheer amount of options and choices that make building one vastly different from building another.

My sister just wants a simple privacy fence. From what I have found, this entails posts set every 8' with low/mid/high rails between and attaching pickets to rail. I see 5x5 posts are also recommended, however the only local option here is Lowes or HD, which means 4x4 or 6x6 (which seems like overkill).

Ive drafted out a rough lumber supply list that constitutes (45) 4x4x8 for posts, (120) 2x4x8 for rail and (600) cedar 5/8x5-1/2x 6' dog-ear pickets. Obviously there will also be screws and concrete ordered and I've gotta figure out a plan for a gate, but is there anything obvious I'm not accounting for? Is there any tips to ensure the fence is built as well as possible for being a budget-friendly privacy fence?

*Also, yes I know I accounted for each corner post twice when counting on my sketch, this was deliberate so I'd remember to order atleast a few extra posts in case some are severely warped.

I appreciate the help, just don't want to screw up the job in the effort of helping out a family member!