r/Firearms • • 1h ago

Question Best deer caliber for reliable expansion, exit wounds, and blood trails? Considering 6.5 Creedmoor

2 Upvotes

I’m buying a new bolt-action deer rifle and leaning toward 6.5 Creedmoor, but one of my biggest priorities is having a reliable blood trail if a deer doesn’t drop immediately.
I hunt whitetails in South Georgia, generally around 70–150 yards, occasionally out to 200. Most deer are roughly 100–150 pounds, and I’m often hunting thick woods where tracking without blood can be extremely difficult.
I’m trying to understand how much blood-trail performance comes from caliber versus the specific bullet.
I’d like to hear firsthand experiences with 6.5 Creedmoor compared with .243, 7mm-08, .270, and .308.
Specifically:
Which caliber and factory ammunition are you using?
Are you consistently getting exit wounds?
How have your blood trails been, especially in thick woods?
Have you noticed major differences between bonded, copper, and traditional cup-and-core bullets?
At what distances have you seen reliable expansion and penetration?
I’m looking for a relatively low-recoil hunting rifle that produces quick, humane kills and dependable recoveries, not necessarily the biggest cartridge available.
I’d especially appreciate experiences from hunters who’ve taken multiple whitetails with different cartridges and can compare actual results.


r/Firearms • • 1h ago

Help

1 Upvotes

I’m stuck between three pistols I’m looking at buying either an Sig 365 axg legion, H&K vp9 or an FN 509. I wanted to see what other people had for experience with any (or all) of these. Cheers


r/Firearms • • 3h ago

Meme Cant be the only one

Post image
36 Upvotes

r/Firearms • • 5h ago

Don’t talk to me or my adopted son ever again

Post image
5 Upvotes

r/Firearms • • 5h ago

Question Holster for Glock 43 with tlr6 and radiam ramjet

1 Upvotes

Looking for holster recommendations for a 43 (not 43x) with a tlr 6 and a ramjet/afterburner


r/Firearms • • 8h ago

First grab for Home Def

0 Upvotes

For close quarters home defense in a neighborhood on 1/4 to 1/3 acre lots with large homes, what would you grab first:

10.5inch AR pistol, 300 blackout, w/ can
Glock 17
HK Mark 23 w/ can

I think I’d grab the HK. The Glock and HK are both very highly reliable, shorter than the AR, and will have defense rounds for less penetration for neighbors. HK is bulkier than Glock. The HK is built for a suppressor and more hearing friendly for firing indoors.

If things went insane, grab the AR. But we’re talking indoors, quick scenario. Thoughts?

Update: I have all 3, not trying decide which to buy. I keep all 3 in a wall safe in bedroom.


r/Firearms • • 10h ago

Has anyone in Washington State legally purchased and transferred a Dark Storm DS-15 Typhoon Fixed Magazine after the assault weapons ban?

Thumbnail reddit.com
1 Upvotes

r/Firearms • • 13h ago

I accidentally put wrong pin in

Post image
0 Upvotes

How can I get this pin out it’s stuck


r/Firearms • • 13h ago

Is this direct thread 556 can concentric? Go or no-go?

Post image
0 Upvotes

r/Firearms • • 16h ago

3.5 ft drop onto wood floor and SRO shattered... Extremely disappointing for the amount of money these cost!

Post image
272 Upvotes

r/Firearms • • 16h ago

LH magazine release for Walther PPQ SC

Post image
2 Upvotes

r/Firearms • • 16h ago

Came across a box of 260 30-06 blanks and two boxes dated 1942

Thumbnail
gallery
92 Upvotes

Like a puzzle trying to put the pieces in the right spot. Would this be a gun broker item


r/Firearms • • 17h ago

Question What model mini 14 is this?

Thumbnail
gallery
17 Upvotes

Apologies for the not so great images, but I'm trying to find out what model mini 14 this is, and if the muzzle device and front sight combo are aftermarket. Unfortunately I can't find much online about it. Any help would be appreciated.

Also, it's used on consignment for $800 at my LGS, if someone could also chime in on whether that's a good deal for this gun that'd be appreciated as well.


r/Firearms • • 22h ago

Rare SW 29-2 4" Nickel-Chrome in 44-Magnum

Post image
40 Upvotes

r/Firearms • • 23h ago

General Discussion EDC for newbie

Thumbnail reddit.com
2 Upvotes

r/Firearms • • 1d ago

FDE Girsan MC P35

Thumbnail
gallery
38 Upvotes

r/Firearms • • 1d ago

Question Question about the AWB case at SC?

5 Upvotes

Is there that much of a difference this case is going to make vs the other ones already established. It feels like an endless spiraling circle of the same crap over and over trying to ban firearms. I would have thought dc v heller and other cases would have put this crap to rest. Why does it seem these people always have room to ban the AR15 and other firearms?


r/Firearms • • 1d ago

Always Loaded

0 Upvotes

It’s just me and my wife in the house.
Thoughts on always leaving one in the chamber at home.
Any concerns of damage to the firearm?


r/Firearms • • 1d ago

My Gats Impractical but badass.

Post image
60 Upvotes

r/Firearms • • 1d ago

Question Caliber choices when shooting without patches

2 Upvotes

Hello,

I want to go out to the range with my Charleville 1777 Corrigé An IX (Pedersoli)(smoothbore) and a Kentucky Pistol (Pedersoli) (with rifling). They are respectively 17,5mm and .44 cal. as etched on their barrel.

The problem is: I want to shoot historically, which at least for the Charleville would mean to load it without a patch, only with the paper the cartridge was rolled in (to my understanding of the matter). The normal calculation with patch thickness is thus redundant, but I don't know whether I can actually safely jam a 17.5mm ball down the barrel with the paper around.

I have been unable to find answers for this on the internet so far.

Thanks a lot

(answers to questions may take some time, I am posting this on behalf of a friend who has been hit with the reddit age verification request)


r/Firearms • • 1d ago

News AUG A4

Post image
284 Upvotes

An offical unoffical leak/release happened and we know what the A4 will look like now. Looks like the trigger guard is potentially removable/replaceable, butt plate has changed, no sure what the cutout near the buttplate is for and the bolt release is ambi.

Looks to have a new style of brass deflector screwed onto the stock, A3 style muzzle brake & M2 style handguard while keeping a smiliar/same reciever, keeping the A1 style charging handle & retains the QD barrel.


r/Firearms • • 1d ago

Question Why does a pistol grip exempt a rifle from 2nd amendment protection?

87 Upvotes

Why does a pistol grip exempt a rifle from 2nd amendment protection?

Does this really make the gun so much more dangerous that it needs to be banned on a federal level and we need to turn every single person who owns a rifle with a pistol grip into a criminal?

Is there anyone here, perhaps an attorney, who is well-versed in US firearms law who can explain this to me?


r/Firearms • • 1d ago

Question Fs-pro folding shotgun magazine tube plug removal

Post image
1 Upvotes

Trying to find a field strip video of the Fs pro to remove the plug in the magazine tube.


r/Firearms • • 1d ago

Last shell binding on maverick 88

Thumbnail reddit.com
2 Upvotes

r/Firearms • • 1d ago

Video How do you carry your gun, knife, extra mag and flashlight

0 Upvotes

When I carry OWB, (during cold weather) with this knife, I carry 3 o'clock and my knife at 6 o'clock. Flashlight and spare mag on off hand side.

I mostly carry AIWB but do this when I wear a flannel. Not with a jacket, because that usually gets removed.