r/FordExplorer • • Jan 23 '26

Mod Post New rules, please read.

23 Upvotes

Hello Explorer owners and fans! We are now in week 2 of our new moderation team. Below are the new subreddit rules we've developed. These have been posted on the sidebar for a few days now. We have not yet removed content based on these new rules, other than those that already applied to Reddit sitewide. So, we don't believe these will change much in terms of the content and discussion we already enjoy. This is more about setting expectations that weren't really there under the previously absent moderation team. Without further ado:

Rules

  1. Follow Reddiquette - Many of our rules are from the reddiquette. Any violation of the reddiquette can be removed by the moderators, especially ones included here.
  2. No personal attacks, bigotry, or harassment - You may strongly disagree with others, but you may not attack them personally. Bigotry or Hate Speech based on race, gender, sexual orientation, religion, age, etc. will be removed.
  3. Spam/self-promotion - You may post your blog posts, articles, videos, photographs, etc that you have written or created, but that should not be the only thing you do here. You should also participate in discussions (on your posts or others). Dealer/vendor posts are at moderator discretion.
  4. Illegal, sleazy, or dangerous activity - Any posts or comments with illegal or dangerous content will be removed.
  5. Uncivil political discussion - Civil political discussion is allowed as long as it pertains to the automotive industry. Political trolling, flame baiting, slurs, off-topic politics, and harassment will be removed, especially if it violates Rule 2.
  6. No AI Content - Posts containing AI-generated text, images, or videos are not permitted.
  7. Moderator discretion - Any post or comment may be removed by a moderator even if it does not explicitly violate a rule listed here.

Now, as I've said before we're becoming more familiar with our roles and the moderator tools, so we are going to try these out for a while. If we end up needing to add, removed, or modify any of these we will make a sticky post letting everyone know what we've done.

Ultimately our goal here is to foster a friendly, helpful, and productive community. So please help us do that by adhering to the rules and reporting content that you feel breaks them. Likewise, if you feel content was removed unfairly, please send us a message through ModMail so we can review it. For the most part we'll simply be removing content, but for habitual line-steppers, we'll be utilizing the ban function based on the severity of the discretion.

If you'd like to provide feedback on these rules, please do so here! No ideas will be ignored. This is also your chance to ask for clarification on any of these rules, we will not take it personally.

Thank you and happy Exploring!


r/FordExplorer • • Aug 27 '26 Bravo

Repair Advice 3.5L and 3.7L Water Pump Replacement DIY Guide

29 Upvotes

First off, all credit for the content of this post goes to /u/nocommittee1477, a Ford Certified Master Technician of 10 years. He gave me permission to make a post out of his content. I cannot answer your questions myself, so use this as a starting point. He generously spent the time to type this out in his free time so please be respectful of that and use this as a starting point.

These instructions should apply to any Fifth Generation Explorer or PIU with the 3.5L NA, 3.5L EcoBoost, or 3.7L NA. These may also be helpful for other models including Taurus and Flex that use a Cyclone or Ecoboost in a transverse configuration. If yours has the 2.0L, 2.3L or was produced beginning in 2020, this will not apply to you.

  • 3.5/3.7 (for the Lincoln people) water pump/timing chain replacement procedure:
  • Raise vehicle enough to drain oil, reinstall drain plug finger tight (you'll be draining it again). Remove right front tire and inner fender well. Remove air intake hose, air box lid can stay or go as your preference. Remove the evap vapor line from the purge valve and the hard vapor line at the RF strut tower. Remove the fuel line from the fuel rail and the supply line at the RF strut tower (there is also an 8mm head bolt securing the fuel line to the timing cover). Remove the upper intake manifold, aka plenum (note there is a single 8mm head bolt securing the upper intake to a bracket that is semi-hidden under/behind the throttle body). Remove all 6 ignition coils, then LH and RH valve covers. Remove the oil feed rails and intake VCT solenoids (inboard on both heads).
  • Rotate the engine clockwise until both intake cam phasers are at 12 o'clock, install cam locks (you may have to slightly rock the cams with a wrench to get the locks to fully seat, this is normal). Drain and remove the degas bottle and hose. Remove the belt and belt tensioner (belt is easiest removed from the bottom, tensioner from the top). Remove the crankshaft bolt and pulley (a 3 jaw puller or 3 jaw harmonic balancer puller will work). Using your floor jack and a block of wood on the oil pan, jack up the engine to relieve tension on the engine mount, remove the engine mount. Remove all the bolts attaching the timing cover to the engine (don't forget the recessed 8mm head bolt adjacent to where the engine mount was), raising and lowering the engine as needed to get all the bolts out. Gently pry the timing cover free (it's RTV siliconed into place) and remove from the top (some people will recover the refrigerant and remove the AC line, but the job can be 100% done without it, the AC line is aluminum and will flex out of the way enough without damage). With the timing cover off you can inspect all your timing marks, primary chain and primary tensioner. Your timing marks are single dots located on each intake cam phaser and the crank sprocket. Their positions should be as stated, cams at 12 o'clock, crank at approximately 430. The primary timing chain should have colored links to match those timing dots on the sprockets. Two single links to match each cam and one double link to straddle the crank. If you cannot see the colored links, it's arts and crafts time! Mark each single link over the top of the cams and the double link straddling the crank. Inspect the primary timing chain tensioner, there are two different designs, but the rule is the same for both. There are teeth that mechanically lock the tensioner out, if 5 or more teeth are exposed, the primary timing chain is stretched and will require replacement.
  • After you've done your inspections and had your arts and crafts time if required, remove the primary chain tensioner, primary tensioner shoe (it's on a pivot), the long primary guide on the front side of the engine, and the short primary guide on the front side. Remove the timing chain (you have to twist it slightly to clear around the phasers). Use an 8mm wrench and reach in behind the Bank 1 (rear cylinder head) intake phaser and loosen, not remove the bolt holding the other short guide. Once you've loosened it and can pull the guide forward, stop.
  • Remove all the water pump bolts and slowly pull the water pump from the block, I say slowly because you are trying to allow the coolant remaining to drain into the oil pan and not sploosh all over the floor and make a huge mess. Once you're not draining coolant remove the water pump out from around the guide you left and reverse process to reinstall the new pump. To reset the timing tensioner, you'll need either a small straight pick or needle nose pliers, a paperclip, and a vise. The early design tensioners had a separate arm with the locking teeth, to unlock use the pick to disengage the mechanism and squish the tensioner closed with a vise, once completely squished, install the paperclip to keep the tensioner collapsed. The second design tensioners have the teeth made onto the plunger itself. To unlock it, squeeze the lock with needle nose while squishing in the vise, again locking it collapsed with a paperclip. Reinstall the short guide, long guide and the timing chain, placing the marked links to match with the dots, keep all slack on the chain on the tensioner side of the assembly. Install the tensioner shoe and primary tensioner. Before pulling the pin verify all timing marks on both the chain and the sprockets match. As additional verification, there should be 48 links between each intake cam phaser and 35 links between the Bank 2 (front) phaser and the crank. If everything looks good, remove the pin from the tensioner and gently pry the tensioner out a little more to ensure good tension on the timing chain (oil pressure will do the rest once the engine is running).
  • Remove the cam locks and rotate the crank 2 revolutions until all your timing marks are back at the 12 and 430 positions. Verify timing by counting the links between positions, 48 between cams, 35 between Bank 2 and crank. As long as everything is ok, you won't need the cam locks again. If not, reinstall the cam locks, remove the tensioner, and retimed the engine until correct. Clean all the silicone from the block and timing cover, remove and replace the crank seal. Apply RTV to the timing cover and along the rear of the block as during installation you'll likely smear some off the timing cover (optionally you can apply all the silicone to the block side of things if you so desire). Reinstall all your timing cover bolts. Reinstall the engine mount and remove your jack from the engine. Drain the coolant out of the oil pan. The crank pulley can be reinstalled with a block of wood, a hammer, and dirty words, or you can purchase a crank pulley installer tool to press it back onto the crank. The pulley is fully seated when there is approximately a 1/8" gap between the end of the crank and the end of the pulley. Replace the crank bolt with a new one! Torque the new crank bolt to 74ft-lbs plus 90 degrees (its torque to yield, and therefore, one time use). From there you reinstall all remaining removed parts. Refill the engine with oil, change the oil filter and I initially fill the cooling system.
  • Cycle the key on (do not crank) to prime the fuel system and check for fuel leaks. Fully depress the accelerator pedal (this places the engine in clear-flood mode and will not fire the fuel injectors) and crank the engine over for 15ish seconds to rebuild oil pressure. Afterwards, start the engine normally, bleed any remaining air from the cooling system and check for leaks.
  • If you want to replace your cam phasers, secondary chains, and secondary tensioners, you'll remove the phasers with a TP55 (Torx Plus, but a standard T55 will fit just sloppily). The secondary tensioners are pushed into their notes and have no hardware to secure them. The phaser bolts are one-time use as they torque to 33ft-lb plus 90 degrees. The phasers are keyed to the cams and have timing marks that match to the secondary chains to ensure proper cam-to-cam timing. New secondary tensioners will stay collapsed until they are pushed fully in and released after being replaced, it's easiest to unlock them with a smack with a flathead screwdriver and a hammer after you've got your phasers and secondary chains reinstalled.
  • I hope this helps anyone that wants to tackle this one on their own. If you have any questions, by all means ask!

I would like this post to become a central hub for any owners considering performing this repair by themselves, and also to give insight to any owners that want to understand what their repair shop is doing.


r/FordExplorer • • 18h ago

Upgrade Advice Side shot nice and clean…

Thumbnail
gallery
55 Upvotes

Just thought I post should I lower a bit???


r/FordExplorer • • 22m ago

Technology/Features 22 Explorer Limited CarPlay

1 Upvotes

Anyone had problems with Apple CarPlay on 22 Explorer Limited? The USB and USB C ports underneath the SYNC display are lit up but randomly stopped charging and working with CarPlay. The USBs in the middle row are still working. Checked the fuses and none of them are burnt. Any other suggestions before I take it in to Ford?


r/FordExplorer • • 3h ago

Upgrade Advice Upfitting a 2027 Explorer Active for emergency purposes

1 Upvotes

Currently looking to purchase and upfit a 2027 Explorer Active for an unmarked emergency response vehicle. I am mainly looking to add exterior warning lights tied to a handheld controller. I will add 1 800mhz radio remote to a remote head in the center console and that will be the extent of my interior upfitting. I am mainly looking to not have to deal with the entire interior fitout of a PIU for an unmarked unit with basic functionality. Here is what I am looking to put in. I am trying to figure out if any of the items will need to be customized to fit on a standard explorer or if they will fit like they would on a PIU. I know I will need to get a bracket for the Ions in the grills and will have to do interior brackets for the strip-lites, but the Vertex, Inner Edge, and Outer Edges are unknown to me.

- Whelen Inner Edge Red/White duo
- Whelen traffic pre-emption emitter (GTT) mounted under the Inner Edge
- Whelen Outer Edge Red/Amber duo to the rear
- Whelen Tracer Red/White both sides
- Whelen Vertex in front corner of headlight assemblies
- Whelen Red/White Ions in the grill
- Whelen U-Series Red/White duo mounted under the side-view mirrors
- Whelen Red/White Strip-Lite on rear side windows
- Whelen Red/White Ions on the license plate (white tied into reverse)
- Whelen CenCom Core control head mounted under rear seats
- Whelen CCTL5 Handheld controller
- Whelen 100-watt siren in grill
- Whelen Lin-Z 3.5" red/white round fog lights
- Whelen 0S Red and Amber surface mounts on the interior of each door panel and tied into door triggers to alternate red/amber flash when the doors are opened.
- Whelen Ion Red/Amber Duo mounted to the bottom surface of the tailgate for rear visibility when tailgate is open
- Whelen Ion Red/White Duo mounted to the rear bumper (white tied to reverse)

I would also like to potentially do a wig-wag module on the headlights and flash the tail lights.

PS, this is for Fire/Rescue and will have emergency license plates to allow the usage of the lights and sirens.


r/FordExplorer • • 3h ago

Technology/Features 2023 PIU Stereo upgrade

0 Upvotes

I currently have a 2023 Police Interceptor Utility that has the standard crappy Sync head unit. I am looking to replace the head unit with a larger screen that incorporates carplay. What are the best options? I have seen a couple aftermarket options, but 1 is out of stock and blocks the vent controls on the passenger side, and I am forgetting what the one one is. Any chance I could replace the head unit out of a civilian explorer? I have an aftermarket center console and a mobile data computer mounted, but the MDT can be locked in to where it won't hit the screen.


r/FordExplorer • • 7h ago

Repair Advice How bad is this fault?

Thumbnail
gallery
2 Upvotes

r/FordExplorer • • 20h ago

Repair Advice Persistent problems with 2019 Explorer fuel system.

1 Upvotes

I have a 2019 Explorer Sport with 103,380 miles.

In August, I had FUEL SYSTEM BG PLATINUM FUEL SYSTEM SERVICE DECARB for at the dealership. The exhaust system was marked as "passing."

In early November, I got code P219A for an air/fuel imbalance. The diagnostic findings indicated that all three Bank 1 fuel injectors had poor flow and that the fuel rail pressure sensor was biased. The dealership recommended and performed replacement of those components, along with substantial additional work. Fortunately, my Fidelity Platinum Warranty covered this repair.

After keeping my vehicle for approximately 16 days and completing more than $5,600 in repairs, I was told the vehicle was fixed. Unfortunately, the check-engine light returned approximately 126 miles after pickup. The new diagnostic code is P0420, indicating catalyst system efficiency below threshold on Bank 1.

I don't get it. I don't know much about cars, but how could the catalytic converter now be damaged if the underlying air/fuel imbalance was repaired? How could my vehicle be released as repaired with this additional damage?

I'm just not sure what to even say and ask at the dealership. I'm frustrated beyond belief. I have all service done as recommended, and I don't believe I should be having all these issues at 103.380 miles. To make it worse, I think the catalytic converter is excluded under my extended warranty. I'm at my wits end with this car.


r/FordExplorer • • 20h ago

Repair Advice 2025 ST Line broken trim piece

Thumbnail
gallery
0 Upvotes

This part split in 2 and the button has come out. Suggestions on how do I go about it? Vehicle is under warranty.


r/FordExplorer • • 1d ago

Maintenance Advice For 6th gen owners, did you stick with the stock tires when it came time to get new tires?

2 Upvotes

I had to get a nail puncture repaired yesterday at America's Tire. While discussing the eventual need for new tires (currently have plenty of tread left and only 13K+ miles on my Active), I told the tire guy that with my previous 3rd gen Explorer, I always ran Michelin Defender tires. The Active came with Hankook Kinergy tires which I have very little knowledge/experience with Hankook. The price difference between the two tires is about $100/tire so if the Kinergy tires are decent enough, whenever I need new tires, it seems like a no brainer to go with Hankook. Thoughts?


r/FordExplorer • • 21h ago

Repair Advice Back control AC issues or touchscreen

1 Upvotes

2026 ford explorer active

I am experiencing problems with my AC and touchscreen. The front controls function well, allowing me to switch the system on and off, but the rear controls reset to level one whenever I attempt adjustment. Has anyone encountered comparable issues?


r/FordExplorer • • 23h ago

Technology/Features Ford Explorer 2016 platinum

Post image
1 Upvotes

Hi so today I notice this on the back of my trunk I want to know if anyone knows what does goes to thanks I got a Explorer 2016 platinum also doing the walkaround speaker the door ones don’t work neither the bass so I’m don’t know if it’s from speakers


r/FordExplorer • • 1d ago

Repair Advice Mystery rubber hose on a fuel system

Thumbnail
gallery
2 Upvotes

This is a 2004 Ford explorer sport Trac, I saw this hose today while looking at the suspension. It was just hanging on the ground but looked by the way the hose was on the other end that it should be hooked up to something. It is in one of the fuel tank lines. When I fill the truck up with gas, I cant fill it all the way or the pressure triggers the gas station pump. Is this some ventilation hose? If so, where should it be at? Been driving this truck for a while now, got it this summer and the biggest I've took it is maybe 30 miles in one trip. It's the hose with the white plastic elbow piece, and it goes somewhere under the bed I couldn't get a picture of.


r/FordExplorer • • 2d ago

Buying Advice 94 sport 4.0 8500 is it worth it?

2 Upvotes

94 xlt sport 4.0 automatic. No rust, new transmission and cooler, manifold gasket, valve cover gaskets, fuel injectors, starter, alternator, thermostat, serpentine belt, catalytic convertor, egr valve, brakes, shocks, and paint job. Listed for $8500. Is it worth it? Private seller who flips cars for a living. Give me some thoughts, if I go look at it what should I look for? Also this is in the northeast united states for reference. Thanks !


r/FordExplorer • • 2d ago

Repair Advice Replacement windshield cowl

0 Upvotes

Hi smart folks,

I replaced my disintegrated plastic windshield cowl a few months ago. Unfortunately, it doesn’t lay flush with the windshield. Not too concerned with rain water, but a bit worried about wet leaves getting under there. Other than black duct tape (which I had on my previous Interceptor), has any found a way to seal up that gap? TIA.


r/FordExplorer • • 2d ago

Repair Advice Speedometer needle

Post image
4 Upvotes

Took out the cluster. Bumped the speedo needle and now it's like this. Its off by 8 mph. Help


r/FordExplorer • • 3d ago

Show And Tell Thoughts On My 2017 Ford explorer interceptor off-road build

Thumbnail
gallery
25 Upvotes

I picked this explorer up back in June of this year n the goal was never to make it perfect.. 😂 im apart of the gambler 500 off-road community so yes this explorer will see off road more then on road.. 😂


r/FordExplorer • • 3d ago

Buying Advice Does anyone know where I can find these?

Post image
1 Upvotes

I’ve looked everywhere and for some reason they apparently don’t sell for 2016-2019. Super weird. The only photos I found were from a listing that only delivers in a different country.


r/FordExplorer • • 3d ago

Maintenance Advice Bank 1 Upstream o2 sensor 2014 explorer sport

Post image
2 Upvotes

How in the world do I unplug the sensor


r/FordExplorer • • 4d ago

Show And Tell New to Us 25’ Explorer

Thumbnail
gallery
88 Upvotes

New to us 2025 Explorer! Love the Space White Metallic. Active Comfort package and upgraded rims. Has the 2.3l. What does everyone think about the platform in terms of reliability?


r/FordExplorer • • 4d ago

Maintenance Advice What 5th gen tires are the best balance of quality and affordability?

2 Upvotes

Looking to replace my tires in about a week or so. Cross shopping Sam's Club, Costco, and Big O. For 5th generation owners, what replacement tires would you recommend?

I'm trying to find a good balance between quality and price, not the cheapest, crappiest tires, but not the most expensive premium grade tires either.

My 2017 has the 245 18 inch rims you get with the base and XLT. Being good in snow and wet weather is ideal, but we don't get much snow near salt lake City, so it's not a hugely important factor. Probably just a good set of all seasons for year round use.


r/FordExplorer • • 4d ago

Buying Advice 2026 explorer Rear Cup Holder Flap

2 Upvotes

Hey there new owner, my kid uses big Stanley’s, does anyone know of any cup holder extenders to put in the rear cup holder flag so it can fit a bigger cup?


r/FordExplorer • • 3d ago

Repair Advice 2017 3.7 Explorer, Random and intermittent misfires

1 Upvotes

I’m looking for some help with my car. I’ve done a bit of mechanical work just on my own cars I’m just not familiar with newer Fords. I have a 2017 3.7 Ford Explorer. Spark plugs and coils have been replaced. I’ve been driving it for almost a year with no issues. Without any warning the check engine light started flashing and it started misfiring severely. Pulled over and it stalled. Ran codes and it showed several misfires all on one side of the engine. It has had a code for P0430 on that same side of the engine for a while. I crank it back up after a minute without issue and drive for a week with no issues. Same thing happens last night except it takes longer to start up. Then drives fine. Same codes, just misfires and the already existing P0430 on that same side. Anyone have any ideas? I plan to see if the converter is hotter or cooler on one side or the other to make sure it isn’t severely blocked. The harness isn’t loose, I can’t replicate this problem at all. I’m thinking a crankshaft sensor possibly? I’d say EVAP issues if it wasn’t causing one sided misfires. Thank you to anyone who read this far and who may provide any info or assistance, best wishes


r/FordExplorer • • 5d ago

Show And Tell New to me explorer

Thumbnail
gallery
63 Upvotes

Picked up a 2022 forged green this weekend!

About time to get a new car!

60k miles and a decent deal I think it was worth it lol