Hi, I have a Picoloader with latest software of picoloader and swiss on it and i have sd2sp with swiss on it. When i boot up the console, it skips the animation as intended and when i switch the settings to production, it will show last few bits of the animation and then go into swiss, followed by a momentary black screen for a few seconds and back into swiss, how can i make it where i can play the animation from start to finish and load into swiss without the quick black screen. i also use a bitfunx adapter.
A friend of mine has been building Shardscape, a hex-terrain skirmish game inspired by HeroScape. You build a battlefield, draft an army from nearly 200 original heroes and squads, then fight it out turn by turn with order markers, initiative rolls, and high ground bonuses. It already runs on PC, Mac and the PS Vita, and I'm helping bring it to the GameCube.
The GameCube version is played with a pointer on the Control Stick. It gets its own layout for each kind of TV: on 4:3 the battlefield fills the screen and the command panel slides in as a drawer, while on 16:9 the panel sits beside the board. You can play against bots at five difficulty levels or pass the controller around. With a network adapter, you'll be able to host games on your GameCube or join games hosted on a PC, Mac or another GameCube.
It's still early in development, so a finished release is a ways off, but here's a first look at where it's headed.
I have 6 wavebirds, 2 silver and 4 white. 4 of them have the backs 2 are missing back cover. $30 for ones with backs and $25 for ones missing backs. No receivers, but I would recommend getting a WavePhoenix receiver from AliExpress for $15. DM me if youâre interested
This is my in-game cutscene system, called the Arcroarts Animation System. It's part of my own in-house game engine, which I wrote in C/C++. đ
The system runs across my PC and an SN Systems TDEV GameCube development kit.
Think of it this way: the GameCube handles the graphics and rendering, while the PC acts as the user interface and master controller. The two communicate over an Ethernet connection, allowing the PC to send commands to the GameCube.
In other words, the PC is where I control the system, and the GameCube does the actual graphics work.
I'm using a gc loader hw2 and I'm very curious which is the best file type to use. I know nkit is the general recommendation because of its small file size but I have also heard from many places that nkit doesn't have 100% compatibility and has problems with two disc games. I'm also very unaware how to even get a normal ISO. I've only ever seen ciso or nkit. Only ever seen dol for Homebrew apps.
I finally got all the parts together to start working on a new project: getting a webcam up and running on the Nintendo GameCube!
There's still plenty of experimenting and development ahead, but I'm excited to see what I can get working. More updates coming soon! Let's see what Claude can do.
I'm not opposed to modding my gamecube and in fact plan on doing it, but whenever I've seen anyone ask this question, people just say to mod it and put the iso on the sd card. I like having physical copies of my games, even if unofficial. Would it be possible? Would I have to do anything outside of just burning it?
I'd like to start this post by saying I am not an electrician or a expert modder whatsoever, I just wanted to try my hand at a new project and give some love to my old childhood gamecube.
A few months ago, I got back my old gamecube and learned about the pluto II mod and I thought it would be a nice solution to plug the gc to a modern TV since I have a PAL DOL 101 model.
When I got the mod, I made a first attempt at soldering everything, and by some miracle, the two debug leds (28 and 29) were both blinking at the expected rate. Unfortunately, the signal was very poor and I was only getting one image every 10s with some white pixels in it. That's when I learned about the sensitivity of the 54MHz wire and saw that mine was getting pinched by the mounting bracket and going through every other wire. I tried resoldering it and even replacing the wire but led 28 never blinked again. I also tried resoldering every wire to the pluto board but no luck.
So I decided to resolder every wire on the motherboard one by one and checking each time if led 28 was blinking. I started by soldering only 54MHz, 5V and GND 1 and led 28 started blinking again.
Then, I proceeded in the order indicated by the red numbers in the image below :
Everything was going smoothly and led 28 was blinking up until wire 7 where the led would just remain on. Resoldering it or soldering any other wire didn't do anything, so I figured I needed to solder GND 2 which fixed the issue. But then it happened again at wire 10, no matter which wire I would solder, led 28 would just stay on, but there is no more GND to solder at this point. So I tried resoldering the two GND and 5V and resoldered wire 10, still nothing.
Then I tried again with wire 11 instead of 10 and heard a small crack and the led never turned on again. I guess the led broke somehow :/
In a last attempt I tried soldering every remaining wire, the gamecube started but no signal was detected from the pluto board. And now, I don't really know what to do. Can any of you help me understand what happened and if/how I could fix this ?
If your all not aware, there has been major advancements in game decomp, and many games âsuper paper Marioâ included now have decompiled ports, since that game was originally designed for the GameCube up until the last minute when Nintendo ported it to the Wii, I wonder when a super paper Mario port will finally be made for the GameCube?
Before anyone doubts this, super mario galaxy has a literal ânot fully finishedâ port on the PS2
Thinking about picking a Shiny GEM kit up for Black Friday (assuming we get a sale of some sort). Is it worth picking one up or should I stick to the HDMI adapters? I'm looking to get the cleanest possible image out of my Cube.
I finally ended up with my gamecube launching picoloader and swiss but now some of the games makes my screen go glitchy. I have an av2hdmi adapter but idk if that's the real problem. As you can see when i try to play Animal Crossing, the games and screen work perfectly smoothly and fine, but when i try Soulcalibur 2 or Twilight Princess the screen glitch like crazy. What could the issue be ?
The Carby Component cable was the first (to my knowledge) consumer available recreation of the GameCube's component cable, and it was amazing. Unfortunately, it had one crucial flaw - it was built on GCVideo 2.4 which had some deficiencies in how it handled Chroma, among other things, and had no built in way to be updated.
The board for it did, however, have the relevant pins to do so, and after a bit of reverse engineering and many, many flash attempts - including repeating the rather annoying means of getting it into flashing mode - I finally cracked it.
So for those few out there who still love the system looking its best on a CRT and have one of these cables around, I thought I'd share with the community.
I have the pico launcher on the right side who is blue (i updated it but i did not film it in the video) there is the sd2ps2 adapter where i formated to FAT32 then installed my games folder, added the ipl.dol file (swiss_r2119.dol renamed as ipl.dol), and the swiss folder (the one extracted from [EXTRACT_TO_ROOT.zip]). But i still dont know how to make it work.
And how to do so, I'm using swiss. I have some old save files on a regular Nintendo memory card, from the early 00s. For sentimental reasons I want to transfer them to memcard pro so I don't lose them. How do I do it while on pico boot
So basicly, i installed the picoloader inside, (we can see the blue light on), first time i turned the console on there was a "Pico loader" game on the "game disc" category, so i pressed start but then it did go back to the menu without the game this time on the "game disc" (the top of cube's menu). Now i dunno what to do đ
Managed to get the game running (shoutouts to u/Proper-Count-5064 to help me setting it up). Unfortunately, performance is not as good as promised, as it struggles to load content. Quite disappointing specially because of it being quite tricky to build honestly, but it's sorta playable anyway PS: it's not my own port, it was posted on Twitter before, sorry if this gets mistaken
Hey everyone, Iâm loving all the new gamecube homebrew apps and games! It inspired me to work on a new project called the GameCube Homebrew Hub. Itâs like the homebrew browser for the Wii where itâs a one-stop shop for downloading apps directly to your gamecubeâs SD2SP2 card.Â
As these apps rapidly iterate, I wanted a way to see and download updates, discover new apps, and also update Swiss directly from the console.
If thereâs any ideas for improvements, pull requests or feedback please open an issue on GitHub and we can work together to get that implemented.
If you want your project included in the default list of apps, please submit a pull request on the GameCube Homebrew Hub Catalog using the GitHub template.Â
Meet Professor Scotty, a friendly holographic professor who lives on your GameCube! Ask questions using the GameCube Microphone or PSO keyboard, and he'll respond aloud in a Scottish accent.
BrainBox features an animated 3D professor, on-console Scottish text-to-speech, and AI support for Groq, Gemini, Claude, and ChatGPT using your own API key. It also includes speech captions, built-in updates, and display settings.
You'll need a network adapter, SD card adapter, and optionally a GameCube Microphone or PSO keyboard. Download brainbox.zip from the Releases page and copy the brainbox folder into your SD card's apps folder.