r/GasBlowBack • • May 13 '26

Discussion [Megathread] Importing GBBRs

88 Upvotes

This is not a place to discuss politics

Before the sub was restricted, a lot of people were posting questions about, or their experiences with, importing “realistic” GBBRs into the US. In order to keep the sub organized and not filled with the same posts, please keep discussions about the topic to this thread.

Discussions regarding countries besides the US will kept to this megathread as well.


r/GasBlowBack • • 21d ago

Purchase Advice Purchase Advice - November 2026

11 Upvotes

Hello all, welcome to the monthly purchase advice megathread!

This thread is meant to conglomerate purchase advice for both newcomers and people looking for additional GBBs. Keeping this discussion to one thread means less searching should anyone have questions that may already have been answered here, as well as more visibility to inquiries in general, as comments made here will be visible for the entire month stuck to the top of the sub.

Please be sure to skim through this thread for posts with similar requirements to your own first, as recommendations relevant to your situation may have already been posted, and may even include answers to follow up questions you might have wished to ask.

As always, if you're a newcomer to this community, welcome. If you're a regular, welcome back.


r/GasBlowBack • • 6h ago

Discussion My first GBBR 🫡

Post image
69 Upvotes

I just pulled the trigger on my first ever GBBR. The GHK HK416A5 deluxe steel version. Any tips for regular maintenances and upgrades to avoid major problems in the future? Thanks! Drop your build below 🔥


r/GasBlowBack • • 7h ago

Gun Pic mk18 Tm ngr&mws

Post image
79 Upvotes

r/GasBlowBack • • 10h ago

Gun Pic STS Daewoo K-2 (a.k.a. Han 86)

Thumbnail
gallery
87 Upvotes

Not from Marksman, but from local Korean company STS. I have a love-hate relationship with this one.


r/GasBlowBack • • 46m ago

Gun Pic Western Arms Beretta M92FS Brigadier INOX

Post image
• Upvotes

r/GasBlowBack • • 2h ago

Gun Pic Wachu think 🤓

Post image
9 Upvotes

Staccato c2 upgraded version (Steel firing group, T2 hop and gas route rubber).

Firefield micro red dot (Still trying it, it doesn’t convince me much although it was pretty cheap, 56€ i think).

Begadi aluminium compensator.

Less than 3€ aliexpress torch that surprisingly works 😂 (it powers pressing the under button, not the flaps).

I had this replica for a while, it shoots really well but i don’t get the 0,9J that people on reviews get, more like 1,10 or so with a full mag on 8kg gas. Gas efficiency is good but not great, in my case.


r/GasBlowBack • • 18h ago

Gun Pic My home brew VFC M4A1 GWOT clone

Thumbnail
gallery
97 Upvotes

It’s around 85% clone correct, built from my BCM MCMR, some of the parts you see with the bronze color are reused from the MCMR lower. Most everything else is surplus, or VFC.

  • Unicorn 370mm inner barrel
  • Crusader 14.5 steel barrel
  • Maple Leaf CNC hop unit and 4uad bucking
  • MCMR Steel BCG w/ VFC NPAS
  • Surplus KAC RIS and VFG
  • Surplus Colt pistol grip
  • Surplus Colt waffle stock
  • VFC receiver set (I got the lower imported a couple weeks before all the customs issues)
  • Vortex Sparc II (Repro ACOG soon)
  • Evike PEQ
  • Flip up rear sight on the way
  • Custom UID tag matching serial number from California Laser Works

r/GasBlowBack • • 2h ago

Gun Pic G&P M4 WOC VR Passthrough

Thumbnail
youtube.com
3 Upvotes

I want to apologise for poor video quality as it was a quick upload.

Will upload cleaner one later.

Got to use my G&P M4 WOC GBBR to play in VR but this time with far better adjustments.

Hope to try this in a large hallspace soon.

Enjoy!!


r/GasBlowBack • • 14h ago

Discussion Need help trying to find these as knock offs

Thumbnail
gallery
18 Upvotes

So i play a lot of pcvr and i play a game called Into the Radius with some mods and i would like to use my we tech ak74 to turn it into this build form the game but i can't find any cheap parts except the grenade launcher, in i would also like to find a 3d printable pbs-1 full size suppressor that can fit a tracer unit within it.


r/GasBlowBack • • 1d ago

Gun Pic HK Family in progress

Post image
324 Upvotes

r/GasBlowBack • • 16h ago

Discussion Whats yalls opinion on kyairsoft?

5 Upvotes

I’ve been thinking about ordering from them for a while but I’ve read some not so good reviews about them. I want to get a we tech Thompson to complete my 101st airborne kit and can’t seem to find them anywhere else. Just was wondering if anyone has had any experience.


r/GasBlowBack • • 1d ago

Gun Pic TM URG-I 11.5 Inch Build

Thumbnail
gallery
215 Upvotes

Finally got my TM URG-I build finished.


r/GasBlowBack • • 1d ago

Troubleshooting Need help with restoring the finish on my AK74UN [WE-Tech]

Thumbnail
gallery
19 Upvotes

I've had this second-hand AK74UN for a while now, and the scratches on the surface have really been bothering me. Does anyone know a good way to restore the finish? I'm not a big fan of the worn look and would love to get it looking clean again.

I posted this on r/airsoft but I also wanted this sub’s opinion


r/GasBlowBack • • 16h ago

Discussion KWC Makarov blowback holster options?

1 Upvotes

I read this post: https://www.reddit.com/r/airsoft/comments/zwq721/does_anyone_know_if_a_kwc_makarov_mag_will_fit_in/

Where someone stated that the magazine of a KWC Blowback makarov will not fit in a regular surplus makarov holster. What makarov holster would it fit in then? Does anyone have any experience with this?


r/GasBlowBack • • 2d ago

Gun Pic GBB Pistols

Thumbnail
gallery
548 Upvotes

Pls make gun sig p211 gto


r/GasBlowBack • • 1d ago

Gun Pic Anyone else like a hybrid M110?

Thumbnail
gallery
143 Upvotes

Love the K1, but also love the big boi look of the sass, so decided to throw both looks together, and im completely here for it! What's your opinions?


r/GasBlowBack • • 1d ago

Gun Pic Repainted my VFC URG-I

Thumbnail
gallery
148 Upvotes

added "forest green" and "mud brown" on top of the coyote


r/GasBlowBack • • 1d ago

Troubleshooting VFC Glock 17 Gen 5 MOS slide gets stuck halfway during disassembly

Enable HLS to view with audio, or disable this notification

5 Upvotes

in the vid I pressed down the disassemble tabs beforehand as I can't press em down with one hand, the slide gets stuck at the position like there's a wall blocking it, I can still pull the slide back and fire it, and bc it's a brand new glock(basically stock aside from the rwr) I didn't want to force it too hard, I don't wanna breaking it just now

this is also my first time trying to disassemble it, so I might just be missing something obvious lol

any idea that could fix this would be appreciated

edit: solved, just need to give it a push


r/GasBlowBack • • 1d ago

Gun Pic a photol took on a whim

Post image
105 Upvotes

GHK HK416A5


r/GasBlowBack • • 1d ago

Gun Pic VFC AK105 Build

Post image
62 Upvotes

VFC AV105 w/ mostly RS parts. Handguard is from 5KU and was made for GHK. Had to do quite a lot of filing


r/GasBlowBack • • 1d ago

Gun Pic Vfc Kimber Ultra Carry II

Thumbnail
gallery
41 Upvotes

Haven't seen many post about em, but they're honestly extremely nice. Light yet solid, crisp adjustable trigger, crisp snappy blowback, pretty externally rs compatible. But also very proprietary, though the guidehop is very handy in a pinch. Though the only thing I think would make it perfect is some TM compatibility internally, but for an OOTB pistol, its very on point. Anyone else have experience with one?


r/GasBlowBack • • 2d ago

Discussion Gas strength in TM URG-I

Thumbnail
gallery
67 Upvotes

Hi all,

So I recently got myself a Tokyo Marui URG-I and was wondering if 145 psi green gas is too powerful for this particular platform.

The recoil is real nice but I’m worried it’s going to degrade all my internals very quickly.

What is peoples experience with TM GBBR rifles and what strength gas do you normally run in it?

A guy working for Shogun (big NL airsoft brand) told me he always runs this gas in his TM rifles but I wanted to hear other peoples experiences.


r/GasBlowBack • • 2d ago

Gun Pic The SVOBODA MK13 MOD5 ejects the cartridges flawlessly, but I feel it still needs a little more break-in. It would have been absolutely perfect if it had also included the recoil function as originally planned.

Enable HLS to view with audio, or disable this notification

42 Upvotes

r/GasBlowBack • • 1d ago

Troubleshooting Brand new tokyo marui gold plated mag stopped working

Enable HLS to view with audio, or disable this notification

2 Upvotes

Well this is very frustrating coming from something thats 200 dollars the mag stopped feeding and after 1 shot it wouldn't go anymore any reason why im new to this