r/GeneralContractor • • 10m ago

Still waiting on RFIs and the bid is due tomorrow

1 Upvotes

Working on a commercial buildout bid and a few scope questions are still unanswered. The drawings leave some work sitting between two trades, and neither has clearly included it in their price.

Don't want to carry a cost that isn't ours, but leaving it out could come back to bite us later. How do you guys handle this when bid day is this close?


r/GeneralContractor • • 2d ago

Sheathing at corner

Post image
2 Upvotes

r/GeneralContractor • • 8d ago

Timing for General Contractor's License in Georgia

1 Upvotes

Does anyone have recent experience with timing for a GC application is Georgia? I completed the Unlimited tier GC test and submitted my application on September 30th. My understanding (correct me if I am wrong) is that I can't take the business law exam until the state approves me to take it. As of today there aren't even any comments on my application, just a note that it is taking longer than usual to review. Curious if other have experience with this or if this is just normal? I'm pushing 2 months since I submitted and it seems much longer than normal.


r/GeneralContractor • • 9d ago

Job estimates

Thumbnail reddit.com
1 Upvotes

r/GeneralContractor • • 11d ago

Questions about Contracts

Thumbnail reddit.com
2 Upvotes

r/GeneralContractor • • 13d ago

How should I handle subcontractor-caused problems?

7 Upvotes

Concrete sub left large mound of concrete in middle of gravel parking pad.

The person that lives there has no off-street parking because of this. They were upgraded from one gravel parking spot to have an additional concrete parking pad. But now, because this waste mound is so large, they have no parking.

It happened Tuesday. I politely told the sub to remove it Wednesday morning. They said they would remove it Thursday.

Tomorrow will be six days. If it's not removed next week, do I bother having a second contractor quote removing it and subtracting that amount from the first contractor's invoice (once the second does the work)?

As a GC, how should I handle something like this in the future?

Should I always have a subcontractor agreement in place? even for such a small job like this? only $2k.


r/GeneralContractor • • 14d ago

Working after another GC

3 Upvotes

Has anyone ever taken on a job where the owner fired the GC? What are some things to consider before taking on the job? Such as legal issues with the original contract.


r/GeneralContractor • • 16d ago

California GC—homeowners demanding refund over no permits

Thumbnail reddit.com
2 Upvotes

r/GeneralContractor • • 17d ago

CLIENT NOT PAYING OR RESPONDING!

24 Upvotes

I need some help on the legal side of things. I have a client that is hard to reach through text and phone during this entire remodel. We have a signed contract but the issue right now is that she isn't responding to text or calls after I have finished the remodel. She has 10,000$ outstanding and it has been one month since finish. I have videos documenting before and after of the place as well.

She wanted to do this without permits to get it done faster but now im not sure if take this to small claims, will it affect my license or but me in the ass since I agreed to do work without a permit?

What tips do you guys have for me moving forward?

Im really stumped here.

EDIT: I am located in california and the owner pushed for non permit work. The scope was mostly cosmetic. Whole house paint, flooring, window swaps. Bathroom vanity mirror and tub replacement. No plumbing or electrical or structural reconfigurations.


r/GeneralContractor • • 17d ago

Suggestions on how to find a carpenter with experience?

Thumbnail reddit.com
4 Upvotes

r/GeneralContractor • • 18d ago

How do you find clients as new GC in Southern Ontario, Canada?

2 Upvotes

I've been trying to find new clients to do some basement renovation to start with and it has been difficult to find any leads.


r/GeneralContractor • • 19d ago

How to find more jobs/ advertising opportunities.

10 Upvotes

I run a General contracting company in Northern Ca. It’s a family business only been in operations for 3 going on 4 years here soon. We have a few (3-5 depending on season) employees and a list of sub contractors.

I hustle daily trying to find ways to grow our leads and advertise the company to keep our crew and myself busy.

In terms of advertising we have a few paper (physical location) advertisements. These haven’t gotten much work but they do keep our name out there.

Website and web presence: large amount of our projects come from our web presence. I’ve built this out myself and am actually fairly happy with it. I also regularly look at state and government job boards as we are set up to bid these jobs as well.

Basically wondering what everyone else does to get jobs and if they have any good ideas or avenues that have lead to industry relationships or advertising outlets that lead to decent leads.

I’m also happy to share my web strategy with anyone curious.

For more context our third year we did about 1.4 million on 1 crew and our subs. with a profit margin of about 42% so we could really up our ad spend/ outreach or system management etc.

Any info or suggestions is greatly appreciated!!


r/GeneralContractor • • 19d ago

Anyone else tired of unlicensed contractors advertising as “licensed and insured”?

30 Upvotes

I’m a licensed residential contractor in Central Florida, in a pretty low cost of living area. One of my biggest frustrations lately is the number of handyman businesses advertising themselves as “licensed and insured” when all they have is an LLC and maybe some general liability insurance.

The average homeowner doesn’t know the difference between registering an LLC and actually holding a contractor’s license. They see “licensed and insured” and assume they’re hiring someone who’s qualified to do the work.

Meanwhile, those of us who actually went through the process of getting licensed, maintaining insurance, pulling permits, and doing things by the book are competing against chuck-in-a-truck guys doing work they’re not legally allowed to perform.
What’s even more frustrating is that DBPR seems to do next to nothing about it. I see these guys advertising bathroom remodels, kitchen renovations, and other jobs that clearly require a contractor’s license.

I’m all for someone making an honest living doing handyman work, but there’s a big difference between that and misleading homeowners into thinking you’re a licensed contractor.

Anyone else dealing with this in their area? Has anyone actually had success reporting these businesses to DBPR?


r/GeneralContractor • • 19d ago

Interior Designers as General Contractors

9 Upvotes

A few times now I've been approached by interior designers looking to hire my firm for carpentry and it appears that they are acting as the General on the project. In one case I assumed the role as General after discussion with the interior designer and home owners because scope far exceeded that of design. What I see are designers who think they can sub out the work without fully understanding how systems in a building are integrated. I'm curious if anyone else has had this experience.


r/GeneralContractor • • 19d ago

Employer Wants Me To Take The Licensing Tests

1 Upvotes

I have no idea what to do about the task I have been assigned.

I’m a new employee (1 month) at a general contractor in MN that is a startup.

My boss is owned another company that made him a multi millionaire.

He said that we need to start looking into bidding commercial and residential projects in other states.

He wants me to get the requirements and take the tests.

I’ve been in the industry for 10 years but have never dealt with this type of stuff.

#1. Is there risks involved with me taking the tests?

#2. Is it even possible for me to take the test on behalf of my company?

As the new guy, I am in a difficult position to say anything directly


r/GeneralContractor • • 20d ago

GC Career path help

1 Upvotes

I’m 18 in Florida studying for an AA in construction management and working for my dads remodeling company gaining hands on experience. I want to get my GC license as fast as possible so I’m wondering, if I get my OSHA 30, procore certified, blue beam certified, any other certifications like CCM, would that land me an internship in a big construction company? Or would it definitely land me in an internship and instead of going for that I go for getting hired as an assistant super or something like that? basically what I’m wondering is what next steps should I take to make sure I get my gc license as soon as possible preferably within 2 years


r/GeneralContractor • • 22d ago

Compensation Question for Qualifying with Company

2 Upvotes

I’m working on getting my GC to be the qualifier for my company. We were recently acquired by a large corporation that makes well into the high 9 figures of revenue and our current qualifier is retiring soon. Once I pass the test I’m expecting some type of compensation. Google is saying some pretty crazy high numbers (2500-5000 a month) and I don’t know if that’s accurate. I’m thinking about negotiating a monthly use stipend/fee along with a spot bonus but I’m not sure where to start. I was thinking $1000/month with a 10-15k bonus. Is this crazy? Any advice would be appreciated.


r/GeneralContractor • • 23d ago

My employer wants me to take the NASCLA test.

Thumbnail reddit.com
1 Upvotes

r/GeneralContractor • • 26d ago

Best way to find part time Admin?

5 Upvotes

We're a small (mostly) residential builder in SW FL that specializes in additions and remodels. We've been taking on larger new construction projects that are set to begin construction in 1st quarter of next year.

Being that we've come this far with only 2 "employees", myself and my partner, we are going to need an admin moving forward to help cover most of the office work so we can be in the field running jobs without getting bogged down with paperwork.

"Paperwork" being things like permit applications, schedule building and maintenance, bookkeeping, subcontractor correspondence, insurance, etc.

How have yall gone about hiring/training for such a role? We'd want to get some body in soon so we can train them up and have them ready to go in the next few months.

I know guys that have had good results with Fiverr, etc, about the same amount have gotten bad results.

I'm thinking working our networks and sites like LinkedIn or Indeed are our best bet, then maybe Fiverr. Curious what's worked for you all...


r/GeneralContractor • • 26d ago

GC: Qualifying Your Subs.

Thumbnail reddit.com
2 Upvotes

r/GeneralContractor • • 27d ago

Construction layoffs hit lowest level since 2000

Thumbnail
constructiondive.com
3 Upvotes

r/GeneralContractor • • 27d ago

What did you think about the features announced at Procore GBK?

Thumbnail reddit.com
1 Upvotes

Anyone there and checked out the new features? Curious what you thought.


r/GeneralContractor • • 28d ago

How often do you supervise?

6 Upvotes

My background is commercial so when I started my business it was all I knew to have a superintendent and foreman and laborers onsite everyday all day for the duration of the job. Since starting my business I can only get residential jobs, most of which cannot afford a robust team onsite.

Let’s take an ADU or equal residential addition type job, do you plan to always keep a foreman or super onsite? I am getting a lot of these jobs and as soon as something goes sideways on one job it means I’m not available to control the others, so I want to hire a talented foreman or super. I just want to how typical it is for residential to have these guys and do you keep one on every job, or give them a few to control? Should I consider a PM and have them delegate? Whats the normal residential site management look like for you guys? thanks!