r/Glock43X • • Apr 16 '24

G43X RSA Revision.

Thumbnail
gallery
101 Upvotes

In December I was having issues with my new G43X MOS. It was having some strange issues where it was not fully returning to battery. I finally got around to calling Glock and I received a RSA 1-1-1. I have not had a chance to take it to the range, (I will later this week) but the new spring feels great when I cycle it by hand. Has anyone else ran the revised RSA?


r/Glock43X • • 10h ago

JaegerWerks +6 Extension for OEM 15 Round magazine

Thumbnail
gallery
41 Upvotes

Ultimate carry set up in my opinion. Having gone from 10+1 to 21+1 is an insane practicality jump. The lock up on these mag extensions are what I'd hope for. Comes with a small steel locking plate (similar to strike industries emp baseplates). Looking forward to running these in 2 gun matches without worrying about my mag exploding on drop impact.


r/Glock43X • • 2m ago

43x MOS Best silencer recommendations

1 Upvotes

What silencer should I get by January? Looking for the best recommendations. <3


r/Glock43X • • 41m ago

43x MOS Vaultek Safes

Thumbnail reddit.com
1 Upvotes

r/Glock43X • • 14h ago

43x and 43x MOS Optics for 43x Mos?

11 Upvotes

Just purchased my first gun today! The Glock 43x Coyote!

I am looking to get some optics for the gun but not sure what model attaches easily and works well! Been hearing a lot about Holosun EPS Carry!

Any recommendations?


r/Glock43X • • 1d ago

43x MOS My 43x

Post image
70 Upvotes

Parts used in the build:

@glockinc - 43X MOS
@tactical_pontoon - Peacemaker Extreme Carry Trigger System.
@crossarmory - Dimpled Pin Set, Extended Slide Lock & Competition Mag Catch.
@workmanstipples- Stippiling.
@shield.arms - Magwell.
@holosun - HS407K X2, Red Dot.
@ameriglosights - Blacked Out Iron Sights.
@glockstore - Double Diamond Extended Slide Stop.
@streamlightinc - TLR-7 sub Gun Light.
@milspinactual - Custom Slide Back Plate.


r/Glock43X • • 17h ago

PSA or Shield Arms magazines for Grit Grips frame?

2 Upvotes

I have seen some people have issues with the new Glock metal 15 rd magazines. Before ordering anything, does anybody have experience with PSA or Shield 15 rd mags on a Grit Grips 43X frame?


r/Glock43X • • 1d ago

Interesting

Post image
66 Upvotes

r/Glock43X • • 1d ago

43x MOS New Toy - Shark Coast “Hush Puppy”

Post image
59 Upvotes

Shark coast tactical threaded, spiral fluted barrel, TLR7X sub, holosun EPS carry in opticgard, tyrant+4, Vickers slide release and mag release, radian magwell, Herrington Arms comp

Silencerco Spectre 9 - hush puppy switch locks slide so all gasses go out the front, prevents slide from racking, so no brass ejected


r/Glock43X • • 22h ago

Comfortable strong side iwb holster with one clip?

2 Upvotes

I'm looking for a comfortable(like hardly notice it's there if possible) holster for the 43x for strong side around 3-4. Want one clip that makes it really easy to put on/take off quickly.

I'm 5'11 260lb now but losing weight so I want something comfy now that will still be good when I'm under 200lb later.

Was leaning toward vedder lighttuck with holster pad but not sure if the rapidtuck would be more comfy or if anyone here would recommend something else.

Thanks!


r/Glock43X • • 1d ago

43x MOS Anyone have experience with this tool kit?

Post image
10 Upvotes

Kit seems expensive for what it is, I am looking for something to have handy to work on my gun. Any other recommendations besides this?


r/Glock43X • • 14h ago

I have zero interest in the 15 rd mags for my carry 43X. I don't worry at all about needing more than 11, or 21 if I have a spare that day, while I'm out and about. Reliability is #1, no interest in breaking in 15s to make sure they work. I have a 45 at home and an SBR. Am I delusional?

0 Upvotes

Dead in da streetz?? Is my favorite gun guy content creator Mas Ayoob gonna think I'm an idiot?


r/Glock43X • • 1d ago

Mag release

Post image
19 Upvotes

What mag releases are we running on these?I’m not a fan of the oem release and not wanting to switch over to SA mags.


r/Glock43X • • 2d ago

43x MOS New setup

Post image
43 Upvotes

Holosun EPS carry optic
Tlr 6 laser/light combo


r/Glock43X • • 1d ago

Monarch steel casing ammo

2 Upvotes

I bought about six boxes of this at academy sports because it was so cheap. This is the Brazilian stuff, not the russian-made stuff. By most reports it seems to be fine. Got through five boxes just fine in my 43x. It's Smokey and dirty but I didn't have any issues. In the last magazine of my fifth box, the casing from one of the rounds got stuck in the breach. It fired just fine, but the casing seems to have overexpanded a bit and it would not eject. I managed to get the barrel out of the pistol and the gunsmith punched the round out with a rod. Barrel's totally fine but it was a pain in the ass. I also had two failures to eject. And that's a first my Glock 43x. Probably not buying any more of this stuff.


r/Glock43X • • 2d ago

43x with new NDZ 15 round mag base plate.

Post image
43 Upvotes

Just added the NDZ base plate to the new 15 round magazine. Changing the base plates are so much easier now!


r/Glock43X • • 2d ago

43x MOS Run of the mill 43x assembled, zeroed, and ready for carry 🤙🏻

Thumbnail
gallery
66 Upvotes

r/Glock43X • • 2d ago

Glock Purists do you use actual Glock Oem night sights or aftermarket options ?

Thumbnail reddit.com
2 Upvotes

r/Glock43X • • 3d ago

43x Just joined

Post image
112 Upvotes

Just joined the 43x community and Glock in general as it’s my first gun. Also no I’m not carrying the extendo as my daily 🤣


r/Glock43X • • 2d ago

PSA to check your Vickers extended slide stop/release of you got one

Post image
0 Upvotes

(Good batch posted in image)

and are switching away from OEM 10rds.

I've had non-stop premature slide lock with 1 round left in the mag/inability to slide rack with 1 round remaining in the mag with some ~2 year old Tango Down Vickers slide stop/release ordered directly from TD (not OEM mags but a certain other brand i got to try out at the range), i suspected it was because the tab that interfaces with the follower was angled down by a couple mm compared to OEM or my Kagwerks/Primatia slide stop/releases.. no pictures of that cuz i broke them stupidly thinking i could bend it upwards.

Anyways, tried ordering a new one off ebay this week just to see and yup, the new one sticks straight out like OEM and not at a downward angle which caused premature engagement with the follower even with a round in, causing the slide to lock back with one in the mag.

I'm using Kagwerks since my support hand grip squeezes the lock/release and prevents lock back on final round, and OEM with grip tape built up around it to keep my thumb meat away, but this one is for the wife who needs the extra bump to help lock back slides when clearing/making gun safe and locked back


r/Glock43X • • 2d ago

Anybody have any recommendations for mag extensions?

1 Upvotes

I’m running my 43x with the radian Magwell and currently just have the standard 10 round magazines. I’m looking for baseplate extenders since I can’t find any of the 15 round . Any recommendations would be appreciated!


r/Glock43X • • 2d ago

Standard Co V1 shoes sale

Thumbnail
standardcousa.com
3 Upvotes

r/Glock43X • • 2d ago

43x MOS MOS-K Slide Source

2 Upvotes

I did a quick search in the sub and I couldn't find an answer.

Does anyone know where you could potentially buy a MOS-K Slide?

I have 43x that I'm not exactly sure when it was manufactured (used LEO trade in), and I want to preserve my OEM slide and get a MOS-K slide. My Internet searching has been unsuccessful to find anything other than the original MOS slides.


r/Glock43X • • 3d ago

43x MOS AEMS Micro on Glock 43X – Optic Height, OEM Cowitness & COA Comparison

Thumbnail
gallery
31 Upvotes

Someone on another post asked for pics showing how high the AEMS Micro sits on a 43X MOS with the included adapter plate and how well it cowitnesses with the OEM sights.

Took a few pics from different angles to show the sight picture, overall height, and how much the mounting plate hangs over the sides of the slide.

Also threw in a couple pics of my other 43X with the Aimpoint COA on a slide cut specifically for it, just for comparison. Both pistols have maxwells on them so that adds to the height very slightly.

I imagine getting the slide cut specifically for the AEMS Micro would help it sit quite a bit lower and possibly improve cowitness with the factory sights.

The owner of Stonebridge Gunworks mentioned he’s working on a dedicated AEMS Micro slide cut for the 43X and 48, so that could be an option down the road.

I’m still testing out the AEMS Micro and haven’t decided whether it’s going to stay on the 43X. Just wanted to give it a shot and see how I like it.

Figured these might help anyone considering this setup. Hope it helps!


r/Glock43X • • 3d ago

43x Double wall trigger?

3 Upvotes

I wanted to get a better trigger for the 43x since mine is TRASH, did not break in like my 19. I went with Tact trigger and it has a double wall, like its a first false wall, then the actual wall and then it breaks. First time using a new trigger, my buddy swears by tact trigger and his is really good, maybe I installed it wrong or got a bad trigger IDK, any advice would be appreciated. I’m also not trying to make it into a race pistol it still breaks at like 5-5.5 pounds.