r/GrandPowerStribog • u/Silly-Grade5738 • 1h ago
3d print lower
What kinda bolt catch is that it doesn’t appear to be at style or stribog I’m lost
r/GrandPowerStribog • u/Silly-Grade5738 • 1h ago
What kinda bolt catch is that it doesn’t appear to be at style or stribog I’m lost
r/GrandPowerStribog • u/jrl07a • 22h ago
Anyone know of any gunsmiths doing FRT conversions for the SP45A3? I got a Lingle lower, FRT, and just ordered my SP45A3. I was going to go with Skunkwerks but when I reached out, they are no longer doing the receiver work to allow the FRT to work.
Hoping someone has an angle on a gunsmith, this has been a goal of mine for a while.
r/GrandPowerStribog • u/Silly-Grade5738 • 1d ago
Well I was running the fuck out of my gun and next thing ya know the handle snapped off. I’m not the original purchaser so I cannot warranty through a3 industries. I do have another lower coming anyway. I’m here to ask how you would repair this if this was the last one on earth 😂 jb plastic weld? Or cut drill and bolts? Any info is helpful just please keep the buy a new one comment to yourself because I already did 💪🏽
r/GrandPowerStribog • u/nitofilthyrisch • 1d ago
Idk, wanted to have my SP9A3 be the host for my Obsidian 9. So purchased Tri-Lug mount. Is this G2G? I previously had a CZ Scorpion A1 and it didn’t have this little gap between suppressor mount and barrel. Anyone else have this issue? New to the Bog world but heard nothing but good things.
Thanks All
r/GrandPowerStribog • u/Mrchrisham • 1d ago
interested in getting the 5 inch stri bog with an extension rail for an OCL lithium 9 tucked, which is better? the 3.25 inch or 6 inch rail extension economically?
r/GrandPowerStribog • u/EvilNerd88 • 2d ago
I recently got an incomplete Stribog folding stock that does not have the 1913 adapter and hinge pin. I know I can use the Magpul 1913 adapter as a replacement, but is there a replacement hinge pin and spring?
I reached out to grand power, but am not holding my breath.
TIA
r/GrandPowerStribog • u/tman2285 • 3d ago
Recently just had my buddy (legit gunsmith) unfamiliar with Stribog platform put my Lingle lower together with a G$ trigger. The Lingle lower will no longer hold a mag. I believe the push button mag release now acts as a secondary bolt release. The paddle is missing any spring tension. Wondering what to do. Any ideas would be appreciated
r/GrandPowerStribog • u/Actual_Ease2285 • 3d ago
Hi guys. Just bought sp9a3s with a can. Waiting on a holosun aems to come in. If there any ammo @147,150gr this gun doesn't like. Thanks in advance
r/GrandPowerStribog • u/squirrelrodeo • 4d ago
Went to a local pawn shop to sell a few guns I have no use for anymore. They offered me $75 extra to trade in and I saw this on the wall used. Had an olight, magpul angled grip, PA SLX and came with 5 mags. Got another $50 off for them to remove the light and grip, I decided to keep the PA SLX (Never used one before.) Brought it home, added the streamlight protac I had laying around, an incolite 9 and some goon tape on the brace. Also, got my daughter a pink youth compound bow and walked out all in for $650 after trades.
r/GrandPowerStribog • u/Shak3d0wn • 5d ago
I got this years ago when PSA put them on sale for $569 or thereabouts. I took the amnesty stamp (I know…) and had plans for upgrading my setup for a while but recently, with the ease of acquiring suppressors decided to go for it.
Nothing fancy but it’s my favorite gun to shoot these days. A3 triangle stock, JTAC rail extender, upgraded irons, PA MicroPrism, MS1 sling, LaRue rail covers and hand stop, and my favorite part - SilCo Omega 9K.
Good clean fun.
r/GrandPowerStribog • u/Ok-Feedback2885 • 5d ago
Finishing up some paperwork on this big and I’m I wanna swap out the folding stock with a collapsible stock which one are you guys rocking and is there anyone in the Maryland, D.C. area or anywhere in the U.S. that are willing sell some of there parts they’re not using any more.
• Arms Republic Stribog Rail Extension
• Tri-Lug Setup Suppressor Suggestions
• Flat face Ambi “charging handle”
• magpul angled grip
• Skier Tactical Cheek rest brace setup
• light mounting point and system recommendations
Thanks for checking out my post happy early emergency broadcast test day.
r/GrandPowerStribog • u/TyCruz91 • 7d ago
Y’all, I love this gun but I swear I’m running into one issue at a time lol. It’s a shame, but hopefully Global Ordnance can help me get this sorted out on getting it warrantied. What’s frustrating is that this platform seems to have quite a few weak points that leave the consumer having to spend additional money on upgrades or replacement parts just to avoid potential issues like getting a Lingle lower,A3 Picatinny adapter, and other accessories to get it to be the best pcc on the market. I really hope Grand Power considers another generation that addresses these shortcomings. The problem is that we’re already at the SP9A3 generation, so I’m not sure how likely that is. It’s a shame because I genuinely enjoy shooting this gun, and I want to see the platform reach its full potential. (Photo of my other guns cause it’s a vibe lol)
r/GrandPowerStribog • u/Own_String4061 • 8d ago
Safety Harbor KES Eotech XPS2 Olight Odin Arisaka foregrip KDG extension KDG charging handle Huxwrx Flow 9Kti HBI buffer kit HBI trigger spring Goon Tape Flecktarn
r/GrandPowerStribog • u/eddielee394 • 9d ago
So this is my first bog, although I pretty much have all the other PCC usual suspects in my collection (scorpion, ap5k, Kuna). Pretty happy with how the build came out so far after running about 100 ends through it to break it in a bit. Had a few FTF issues with both stock CZ & akv mags, but ran fine with 30nd Manticore scorpion mags. I really like the bolt catch design on the lingle over the factory lower. Recoil impulse is pretty smooth, minimal port pop and bolt ring, and overall it shoots pretty quiet. Not quite at the same level of the MP5 platform but probably the closest to it out of all my pcc's.
Also planning on adding a 35° locking block once it delivers next week, although I'm not too confident on how well it's going to run because I only ever use pretty low velocity subs and have a feeling there just won't be enough back pressure to appropriately cycle the bolt with a CAT Mob, which is my preferred PCC can, or even with the ED Pointman I currently have on there.
Here's the build list for anyone that's curious:
Stribog SP9A3S
- Lingle Aluminum Lower (Sand matte finish)
- G$ SD3G Trigger
- KDG 3.25" handguard extension
- KDG enhanced charging handle
- HBI Buffer
- HDA3 Stock
- Kriss vector vfg
- A3 Xeno Triad grip
- Radian Ambi safety
- Steiner MPS enclosed red dot
- Reptilia low pro mount
- Kaw Valley 3lug adapter
- Exigent defense Pointman suppressor with an RU3 mount
r/GrandPowerStribog • u/SABER250PLYR • 9d ago
Does anyone have experience with eliteshootersupply.com?
They have lingle UMP lowers in stock but I can't figure out if the site is legit. I've been waiting on a Lingle drop but not sure how long that will be.
r/GrandPowerStribog • u/KMGR82 • 9d ago
Got a hair up my ass and decided I wanted another PCC and committed to this.
The brace has got to go. The question I have is what stock are you running and why? A3 industries has a ton of options and I want some feedback…especially if you’ve tried multiple options.
I already have a can for it, spare light hanging around as well as slings and sling points so I’ve got that covered.
Optic wise, I’ve narrowed it down to either a Meprolight M21, Trijicon MRO or an Eotech. I’m aware of the drawbacks of the M21…but I already have one each of those three and like them all for various reasons, but I’m open to something different.
Budget isn’t really an issue, but I’m also not trying to spend all of my money if that makes sense. I’m a buy once cry once kind of guy and appreciate quality.
Appreciate any feedback
r/GrandPowerStribog • u/TyCruz91 • 9d ago
Hey all! I know the Stribog setup discussion has been beaten to death with Lingle lowers, A3 lowers, feed ramps, buffers, etc. I’m pretty happy with where my setup is at, but one thing that’s continued to bother me is reliability with hollow points and flat-nose ammo.
Setup:
-SP9A3S
-OCL Lithium suppressor (direct thread)
-All stock internals
-Factory 20-round straight mags (Same issue with 30-round GP matte honeycomb mags)
- Failure to feed with 147gr Federal FMJ
I know I’ll eventually need a different lower when I move to an SS setup, so I’m trying to figure out if upgrading to an A3 or Lingle lower with CZ mags will potentially solve my feeding issues, or if the problem is ultimately with the barrel feed lips regardless of what lower I run. Would you guys go ahead and get the new lower first and see if that fixes it, or have a gunsmith smooth out the feed ramp before spending money on the lower?
I guess my biggest question is whether the lower is a possible fix, or if I’m going to end up having to address the barrel either way. Rather not do anything permanent unless that’s the last option.
r/GrandPowerStribog • u/Go_cards502 • 9d ago
Got a patisan disruptor ar15 frt drop in trigger. Anyone know if it'll work in the bog with a lingle lower?
r/GrandPowerStribog • u/Flaboss44 • 10d ago
Any update on if anyone has come out with an FRT for OEM lowers yet?
r/GrandPowerStribog • u/Own-Sky-1142 • 10d ago
I’ve had the stock for a couple months now and I absolutely love it
r/GrandPowerStribog • u/Strange_Watch_6217 • 10d ago
Finally managed to get my hands on a Lingle lower. Any suggestions? I’ve got an ambi radian talon on the way, some magpul scorpion mags, and a Rise Rave 140. That’s not really the trigger I wanted but I just wanted to get everything squared away at once. Which triggers REALLY don’t fit/function, and which actually do that allegedly don’t?
r/GrandPowerStribog • u/HalfCivil6996 • 11d ago
Stribog SP45A3
I’ve seen a post saying this is normal because it’s supposed to square with the barrel face not the shoulder? Is it safe to run if properly torqued and checked with a rod?
This is the Silencerco 2605 for reference.
Is there one out there that fits better? If it’s good to run I’ll deal with it. Couldn’t find a lot of great info out there.
r/GrandPowerStribog • u/BeefWellingtonSpray • 11d ago
I recently received my Lingle Scorpion mag lower and started assembling it with spare parts. I noticed that on the website Lingle advises that you need a .270" wide hammer to fit.
I tried putting a standard mil-spec trigger group in because it's what I already had. It appears to fit and function just fine, although I haven't fired it yet.
To any other Lingle lower owners, is there a better explanation as to why a narrower hammer is required? Is this going to blow up on the first round or something?
r/GrandPowerStribog • u/Plastic-Abalone-7513 • 12d ago
Are there any prints out there or anyone making one? looking for a large one for faster reloads.
r/GrandPowerStribog • u/whatsmylength • 12d ago
Rugged Sub 9 can
Sb tactical folding brace
Vortex Strikefire 2 red dot
UTG angled grip