r/Inkbird • • Mar 09 '23

New Release✨

2 Upvotes

r/Inkbird • • Nov 11 '23

Click of Death

1 Upvotes

Had anyone seen this before? It's brand new and only used once last week. Plugged it in today and just clicks and clicks.


r/Inkbird • • Sep 27 '23

2 Inkbird ITC-308 Serverroom

2 Upvotes

Hi i have a question for setting 2 Inkbird's up.

I have 2 Inkbird-ITC 308 controlling one fan each. The first fan (F1) is supposed to blow the warm air out (measuring the room temperature) of the Serverroom and the second one (F2) is supposed to blow cold air from outside into the serverroom (measuring the outside temperature). And i also have an AC-Unit in this room. So far so good.

Now i want F1 to only blow aout the Air between 20°C and 24°C because the AC-Unit starts to cool at 24°C. Further on, if the room temperature is not inside these 2 degrees, the 2nd inkbird controlling F2 should start. F2 should only blow in the air if the outside temperature is below 20°C.

So my question is how do i set this up the right way? is it even possible to set this up?

Edit 1:

I tried setting the TS Value to 22°C, the HD to 2° and the CD to 2° but when the room temperature is between 20°C and 24°C neither the light for cooling or heating is on.


r/Inkbird • • Aug 22 '23

INKBIRD sv02 not vacuum

1 Upvotes

I bought new flat bags for Sous vide and the vacuum sealer is not making vacuum, there is any way of using flat bags with this vacuum sealer?


r/Inkbird • • Aug 13 '23

Best place for inkbird

Post image
12 Upvotes

After struggling with these for the last few years, trying next model, calibrating, new probes, nothing has changed. Finally given up and going back to kitchen aid dumb thermometer.


r/Inkbird • • Jul 07 '23

Calibrate IBS-TH3

1 Upvotes

Ok, so I have a (legal) grow tent. I’m running an AC Infinity system which has a temp/humidity probe. It also has a calibration “slider” setup the same as the INKBIRD. Ok, so I was hoping the INKBIRD would be the tool I used as a baseline. Both of these have the calibration sliders tho. There are differences in the reading (expected) so how do I know which is correct. Is there some master temp humidity gauge I gotta buy to set the other two to? The readings from the two devices are close however. So is it just a average them out kind of thing? Can anyone recommend a be-all-end-all master indoor weather station I can use to calibrate all my equipment, or tell me if they’re calibrated out of the box?


r/Inkbird • • Jul 05 '23

iBBQ-4T - Magnet Direct to Smoker while Running?

1 Upvotes

I just got my iBBQ-4T and was wondering if I can leave it on the smoker while I'm cooking?

I'm worried that the heat on the smoker may be too much, and could affect the plastic housing or parts inside. I am intending to leave it on the smoker for 8hours+, for long cooks like pulled pork, brisket, etc.

Does anyone else just leave it attached to the smoker? Is it fine? Or is it a bad idea?


r/Inkbird • • Jun 18 '23

Which American brand should I buy to replace my piece of shit Inkbird 4T?

6 Upvotes

Damn things keeps disconnecting the moment I walk away from it. What the hell is the point of a wifi enabled item if it only works when you're standing next to it?

So which brand should I buy to replace this cheaply made foreign garbage?


r/Inkbird • • Jun 12 '23

INKBIRD Great Father's Day Gifts

1 Upvotes

Father's Day is coming!!! Surprises keep coming, once a year, don't miss it!!!

Get your Dad the perfect gift for Father's Day !

INKBIRD have picked a curated deals list and kindly check them out.

USA Store Link:

https://amzn.to/3gL0Kq2 https://amz.fun/bOYf_

CANADA Store Link:

https://www.amazon.ca/s?me=A38U620NCMYZK4&marketplaceID=A2EUQ1WTGCTBG2 https://www.amazon.ca/s?me=AD7TOVQ7GNHS5&marketplaceID=A2EUQ1WTGCTBG2

Pls help us share this great news with you friends. Thanks for your guys support!


r/Inkbird • • Jun 09 '23

Temperature issue

Post image
2 Upvotes

Probes are all outside except #1 which is on the grill and seems close to accurate


r/Inkbird • • May 27 '23

Error

1 Upvotes

I have just gotten a new device to monitor the humidity of my tent, and it keeps showing an error message and won’t go away


r/Inkbird • • May 16 '23

Help!

1 Upvotes

What settings do I need to put in my inkbird ITC-306T to make the max temperature 83F and the minimum temperature 70F? I don’t understand all of these other settings like Temperature Calibration and Control range DS. All the parameters are so confusing. Can someone who knows this better than me please help!!!


r/Inkbird • • May 04 '23

Is there a way to customize notifications on inkbird iOS app?

2 Upvotes

Just set up my IBBQ-4BW today, and other than one of the four probes not working at all, it seems pretty good. The touchscreen also doesn’t register presses that well, but o well

Anyway, I must be doing something wrong, because I cant customize the notifications, I get a motivation for literally everything that’s happening on the device - Bluetooth connected, usb plugged in, Bluetooth disconnected, Bluetooth reconnected - it’s just vomit.

Is there a way to customize the notifications in the iOS app?


r/Inkbird • • Apr 21 '23

Inkbird ipb-16s

1 Upvotes

Hi, I'm building a beer brewing system and ordered an inkbird 16s controller but there was a mix up and they sent me a 110v version. I am from Bulgaria and here the electricity grid works with 240v…. My question is, does anyone know how I can fix the unit to make it 240v? …. So that I can connect the pomoat and the heater to it (they are also 240v). Thanks in advance.


r/Inkbird • • Apr 01 '23

Maximum Probe Cable Temperature

1 Upvotes

What is the maximum temperature the cable on an Inkbird 308 temperature probe will withstand? I'm looking at an application where the probe would experience temperature up to around 80 or 90degC (175 to 195F) inside a thermowell submersed in hot water.


r/Inkbird • • Mar 27 '23

Inkbird 308 itc wifi high/low alarm keeps going off…?

Thumbnail
gallery
1 Upvotes

Is anyone able to offer some help with my InkBird 308 itc WiFi?

I’ve been having trouble the alarm going off, ever since I had to unplug it while cleaning around the tank.

TS (temp set value) is 28.5•C AH (alarm high limit) is 35•C AL (alarm low limit) is 26.5•C

Instead of staying around the 28.5 area like it was before I unplugged it, it’s now cycling up to the alarm high limit, setting off the alarm & then cycling down to the alarm low limit and setting off the alarm again.

How do I stop this from happening? I’ve tried programming it via app AND via manual set up, but it keeps setting off the high or low alarm.

I want it to stay around 28.5•C & quit going high and low & setting of alarms.

Have attached pics of my manual and app settings. Any and all suggestions gratefully received!


r/Inkbird • • Mar 22 '23

Inkbird 306T ERR code

2 Upvotes

Keep getting beeping and the ERR code pops up, I've restarted the controller but keeps happening, won't let me adjust settings.

Does anyone else have this issue?


r/Inkbird • • Mar 17 '23

Switching to new app & lost connection with all my ITC-308's

2 Upvotes

I run a brewery and have lost connection with my ~dozen ITC-308's in the switch from Inkbird Pro to Inkbird. I put my phone on 2.4GHz network, get the unit blinking rapidly, then the app just slowly circles, the blinking stops then fail.

I am currently deleting my username and waiting the three days so that I can re-registar to try starting from scratch.

Any suggestions?


r/Inkbird • • Mar 08 '23

ITC-306A replacement suction cup size

4 Upvotes

I order 306 over Amazon and the suction cup wont stick. What size are they cable for replacement suction cups... I dont have a caliber to size them


r/Inkbird • • Feb 06 '23

IHC-200-WIFI , the probe is abnormal please check it

3 Upvotes

This error has been occurring a dozen times a day and frequently waking me up through the night. The unit itself is working fine and showing accurate humidity readings, is there anything I can do to stop this constant alarm aside from putting my phone on airplane mode? I've reset it, moved the probe and left it in the sun for to dry for 30 mins out in case that was the issue.


r/Inkbird • • Feb 06 '23

Inkbird ITC 310t which k wire are they using for ntc Thermistors ?

3 Upvotes

r/Inkbird • • Feb 06 '23

ipb-16s

3 Upvotes

Is the inkbird ipb-16s proportional or is it an on/off style?


r/Inkbird • • Feb 01 '23

IBS -M1 lights go on then off

3 Upvotes

Random one, moved house, ink bird packed up nice and safely, plugged in lights up for a second then is unresponsive, tried WiFi reset and reset button, no joy. Anyone got any ideas?

Also spoke to a friend who moved his from his house to office space, again safely, had the same issue and ended up getting a new one.

Hoping there's a fix rather than throwing away


r/Inkbird • • Jan 28 '23

Faulty external sender?

2 Upvotes

I have an ITH-20R-I. I use it to measure outdoor temperature.

The battery on the sender recently died and when I replaced them the receiver shows temperature, then shows “external”.

My exterior sensor has an external probe (that I thought might be useful), but when I realized the internal display would alternate between the two, I unplugged it.

That seemed to resolve the alternating display when it was new, but now it’s acting as if the sensor is plugged in (but it’s not)

How do I disable this flicker and just read a constant temp from the base sender?


r/Inkbird • • Jan 17 '23

ITC-308 issues - any advice?

Post image
2 Upvotes