r/Justrolledintotheshop • • Jul 02 '17

Original Content ONLY

8.9k Upvotes

There seems to be a recent influx of posts from people who are attempting to karma harvest by way of stealing other people's images or reposting from different websites.

You are not allowed to post images that are not your own. Facebook reposts are not allowed. Reposts of other user's content is most definitely not allowed and WILL result in a permanent ban from JRITS.

Last but not least, i want to say thank you to all the JRITS subscribers that do detective work and catch these people red handed. it really makes a moderator's job quick and easy. Again, thank you.


r/Justrolledintotheshop • • 18h ago Bravo

$10,000 and 13 cents.

Thumbnail
gallery
2.1k Upvotes

They paid somebody $5k to troubleshoot it. That somebody said it needed a $5k ECM. The ECM did not fix it. This is the ECM ground wire, and that shoddy crimp finally gave up the ghost. One terminal later, it was running like a top!


r/Justrolledintotheshop • • 23h ago

Cinnamon & Sugar for the car?

Post image
1.3k Upvotes

Was checking in a client’s car for service yesterday and this was in the cupholder. Seen a lot of things in strangers vehicles, this is a first for me


r/Justrolledintotheshop • • 23h ago

Tales from the insurance auctions p2

Post image
719 Upvotes

A bunch of people likes my last post so I decided I’d post again. We mostly get cars that are intact but occasionally we cars like this.
The drivers seat was pushed so far into the cab that it was on top of the passenger seat

Edit as far as I could tell, there was no one in the vehicle at time of accident


r/Justrolledintotheshop • • 16h ago

Thank you for calling plug and patch you're local stick something in the hole service

Post image
140 Upvotes

And had to patch 3 out of four


r/Justrolledintotheshop • • 22h ago

Fl flood cars going to be on the move soon

343 Upvotes

Just a heads up to anyone wondering why a FL car is so cheap.


r/Justrolledintotheshop • • 1d ago

Someone came in with a Detroit 6-71 2 stroke diesel engine from a Sawmill, it needs new Piston Sleeves and more stuff, wish me and my boys good luck

Post image
1.3k Upvotes

r/Justrolledintotheshop • • 1d ago

Wtf is wrong with people

Post image
193 Upvotes

Maybe I just have shitty luck, but I experience this a lot and it pisses me off bad. Dirty used Kleenex right where you instinctively put your hand to close the door. Sometimes gloved, sometimes not. A big fuck you to all the unsanitary scumbags that think this an acceptable thing to do with your snot rags


r/Justrolledintotheshop • • 1d ago

Lighting up the engine bay!

Post image
118 Upvotes

Never seen this before. Battery clamp held together with aluminium wire and a cigarette lighter! WTF?

EDIT: Forgot to mention that the lighter is full of fluid and totally works.


r/Justrolledintotheshop • • 1d ago

Welcome to the rust belt!

Thumbnail
gallery
104 Upvotes

15 year old car needed a "simple" 30 minutes axle replacement.

The CV axle was rust welded to the bearing trapping the steering knuckle between the two. Tried to get it out for a bit and went on break to establish a plan of action.

Came back and found a friend of Mr boss man hammering straight on the axle after he removed the nut I left on there. It mushroomed tf out and now we had no choice but to replace it.

Took out the knuckle with the axle out and went to the press. And guess what, 12 tons werent enough. Even with heat.

So I unbolted the bearing from the knuckle preparing it for the eventual hammer time.

But first! The only way to get heat deep enough was to dig a trench in the hub to heat the inner race from the OUTSIDE.

Getting this deep to heat it all around took something like 45 minutes of constant heat with the acetylene torch.

The original plan was to cut it with the torch but I tried the hammer and after 2 minutes of hammering, WE GOT IT OFF.

knuckle was finally saved and we could at long last rebuild that thing.

Tldr; a job that was supposed to take 30 minutes took 4 hours because of rust.


r/Justrolledintotheshop • • 1h ago

Google's Gemini Thinks this is what a Hex bolt looks like

Post image
0 Upvotes

🤣 🥴Who Else Uses Google's Gemini AI model for their auto repair


r/Justrolledintotheshop • • 26m ago

What tool brands do you use working on cars?

0 Upvotes

r/Justrolledintotheshop • • 1d ago

Time to get cracking this friday morning!

Post image
686 Upvotes

This is a first. I dont even know what to say. 23 explorer with... eggs in the skidplate?


r/Justrolledintotheshop • • 1d ago

This passes inspection right?

Post image
196 Upvotes

First in flight, not in sight 😵‍💫


r/Justrolledintotheshop • • 1d ago

More Ford 7.3 destruction

Thumbnail
gallery
171 Upvotes

A little more than your typical cam lifter failure, although that lifter is so bad I can’t pull it out of its bore. I’m not sure what caused the piston damage, it didn’t seem to have a cooling system issue and was full of coolant when I took it apart. And I haven’t even pulled the other head.


r/Justrolledintotheshop • • 14m ago

Is snap on tools worth the money?

0 Upvotes

r/Justrolledintotheshop • • 21m ago

What's the worst job to do when a car rolls in the shop

0 Upvotes

For me has to be drum brakes or thar assembly where on some cars it's got a drum and pads on the same wheel


r/Justrolledintotheshop • • 2d ago

But I change my oil regularly….No. No you don’t.

Post image
535 Upvotes

Burnt dip stick is a sure sign of poor maintenance. Hyundai Elantra is also a sure sign of poor maintenance. LOL!!


r/Justrolledintotheshop • • 1d ago

What is the worst car to work on?

285 Upvotes

r/Justrolledintotheshop • • 1d ago

Customer said truck wont start and makes weird noises

76 Upvotes

Happy Friday


r/Justrolledintotheshop • • 2d ago

Rolled into shop running, told us to repair injectors.

155 Upvotes

Valve spring for the day


r/Justrolledintotheshop • • 1d ago

On today's edition of 'part description that's apparently a real word': Gerotor

Post image
94 Upvotes

I'm a pretty high level sci-fi nerd, mechanic, and a writer. Countless novels, shows, bounce some BS off the main deflector dish and made up jargon, tools, and crap have gone through these eyes and ears. I have a pretty top tier engineer vocabulary.

And never ONCE have I seen this word. Literally made my brain quote Joe Pesci: 'and that's a ****ing word?!'

Engineers, man.


r/Justrolledintotheshop • • 2d ago

That's not a soft drink spilled, that's blood. This is a first for me

Thumbnail
gallery
2.3k Upvotes

Got a car in from the body shop. AC recharge, new tire and alignment. They said just don't touch the passenger seat, there is blood. Ummmmm excuse me...

The outside is covered in finger print power

Yes, someone was shot