r/LampRestoration • • Jun 21 '23

We're back. Not sure what's next.

12 Upvotes

We're open again. Reddit hasn't yielded any ground, despite the size and breadth of the protest. I'm not sure what's next for this little community, but I'll keep everyone updated.

Thanks for the support, sticking with us, and putting up with the blackout.


r/LampRestoration • • 23h ago

They are alive again! Update to the broken Art nouveau lamps

Thumbnail
gallery
56 Upvotes

Here my first post: https://www.reddit.com/r/LampRestoration/s/khUhM9SSHx

First of all, thank you to everyone who commented on my post. It really meant a lot that so many people were just as infuriated about my lamps as I was. 😭

​I fixed the broken parts with resin (epoxy glue) and then remodeled some areas as best as I could with Milliput (a two-part modeling clay), which actually turned out to be the exact right color once cured.

​It’s far from perfect, but I’m just happy I restored them well enough that someone who doesn’t know what happened wouldn’t even notice! I still have to get the paint off one lampshade, but I’m thrilled with the progress so far and wanted to share an update.

​As for the money—I haven’t heard anything back so far, though he actually does have insurance, so fingers crossed! 🙏

​Thank you again!!


r/LampRestoration • • 14h ago

Help identifying glass!

Thumbnail gallery
2 Upvotes

Figured I would post this here as well as this community likely has the answer!


r/LampRestoration • • 1d ago

First restoration? Complete

Thumbnail gallery
2 Upvotes

r/LampRestoration • • 23h ago

How do I polish or make this lamp look better?

Post image
1 Upvotes

Recently got this extremely heavy three headed lamp from marketplace and no amount of windex and soap and water is helping with this speckled appearance. What cleaning product or chemical should I use and how do I clean this? TIA!


r/LampRestoration • • 1d ago

What lampshade will work with this base?

Thumbnail gallery
1 Upvotes

r/LampRestoration • • 23h ago

Lampe hat kein TÜV mehr

Thumbnail
gallery
0 Upvotes

#armesde Lampari kein TÜV mehr ist dies illegal können wir dafür den Staat verklagen


r/LampRestoration • • 1d ago

Need help replacing glass shade

Post image
4 Upvotes

r/LampRestoration • • 1d ago

Would welcome advice on ideas about cleaning soiled brass items

1 Upvotes

I have a very large cache, hundreds of LBS of brass or bronze parts from broken down antique and vintage lamps. I would like to sell them but it would be helpful if I first cleaned them in batches rather than brushing them off with a solvent. I thought of ultrasonic cleaners where one fills the tank with many of these at a time.

Before I bought an ULTRSONIC cleaner could you recommend any method other than immersing them into some liquid like paint remover? The image shows a small sample of these soiled parts. Thanks in advance!


r/LampRestoration • • 2d ago

How to replace a European plug

Thumbnail gallery
1 Upvotes

r/LampRestoration • • 2d ago

Color Code Help!

Post image
4 Upvotes

Hi! I got this cord to replace an old nautical lamp’s cord because it’s way too short. I am in the US and bought it on Etsy from Ukraine because it looked very cool but perhaps a foolish thing to do. The color codes don’t match American colors so I’m a bit confused as to which wire is the hot one and which one the neutral? The cables are grey and blue. This is my first time doing something like this and definitely don’t want to damage anything or cause an electrical fire. Thank you!


r/LampRestoration • • 3d ago

Need help removing a stuck wire from a vintage double-arm metal floor lamp (tight S-curves + central medallion)

Post image
2 Upvotes

Hi everyone,

I’m restoring/rewiring this vintage symmetrical double-arm metal floor lamp (photo attached) and I've hit a wall trying to get the old wiring out.

Right now, the wire is completely stuck and won't budge at all when I try to pull it. As you can see in the photo, both arms have very tight S-curve bends at the bottom that feed into a large circular sunburst medallion in the middle before going down the main column. (I've already removed the E27 socket and dish from the left arm, so the inner vertical tube is exposed).

Before I break anything or snap the wire inside the tube, I have a couple of questions:

  1. How do I open that central circular housing? Is there usually a hidden screw or threaded cap on the front/back to access the wire splice inside, or do the arms unscrew from it?
  2. Any tricks for freeing wire stuck inside tight S-curves? Since it won't move even a millimeter, what is the safest way to loosen old hardened insulation inside narrow curved metal tubing without damaging the finish?
  3. Feeding the new wire: Once I get it moving, is taping/hooking the new wire to the old one the best way to fish it through those bends, or will the tape get caught in the curve?

Any advice from people who have rewired similar vintage candelabra/arm lamps would be hugely appreciated!


r/LampRestoration • • 3d ago

Found a chandelier does anyone know when it was made and where ??

Post image
1 Upvotes

r/LampRestoration • • 3d ago

Who can tell me more about this brass lamp?

Thumbnail gallery
2 Upvotes

r/LampRestoration • • 3d ago Bravo

Advice re rewiring these old lamps.

Thumbnail
gallery
1 Upvotes

They are all metal. One looks to take a normal bulb (see pic) and the other I'd like to put an led florescent replacement tube in. Mostly I'm wondering if I need to worry about grounding them. Thanks!


r/LampRestoration • • 4d ago

Replacement bulbs help

Thumbnail gallery
1 Upvotes

r/LampRestoration • • 4d ago

4 ways

Post image
2 Upvotes

Starting to restore a 70s lamp that originally could've been four different settings. Somebody replaced the socket with a three-way socket. I can't seem to find a four-way socket on the Internet. Anyone know if these exist still or where they're available? (Not my picture. I couldn't get a good pic of mine)


r/LampRestoration • • 4d ago

Lamp holder advice

Thumbnail
gallery
1 Upvotes

Hi. Looking for some help identifying a part(s) needed to rebuild an old lamp. Tried various searches online but I can’t find what I’m looking for. I have a globe shade that will fit the look of the lamp already but I can’t find a compatible bulb holder to go into the top with the correct thread. Help appreciated.


r/LampRestoration • • 5d ago

Replacing sockets on old pennant lighting?

Thumbnail
reddit.com
1 Upvotes

I've had this pendant lighting above my kitchen sink since I got my first apartment 25 years ago (it moved with me to my first house and my house now) my sister bought it for me and I want to keep it as long as I can.

But it's old and brittle. Everytime I try to clean the dust off of it, more pieces of the white start breaking. Do they make a wire with the socket where I could just swap these old ones out and still use the top plate and my pendant shades?

I've added a photo of the light and the part that's falling apart.
https://imgur.com/a/XqDBIzz


r/LampRestoration • • 5d ago

Black paint flaking off brass fixtures, what should I do?

Post image
2 Upvotes

I'm fixing up an older home and found these old sconces that I want to use as vanity lights in a bathroom. ​My Mom was kind enough to rewire them and replace the sockets so they are safe, but the black paint over the metal is flaking off and patchy.

I have oil rubbed bronze hardware in the rest of the bathroom so I think if they are black with a bit of brass peeking through that would match the other hardware best, but if the best way to restore them is to let the original metal shine, that would be lovely too. I just want them to be able to survive a bathroom environment and not look sad.

I think the first step is probably brushing gently with a nylon brush to get the loosest black paint off, yes? What should I do after that?


r/LampRestoration • • 5d ago

Bubbles in the wax

Thumbnail gallery
1 Upvotes

r/LampRestoration • • 6d ago

Replacement socket for this broken plastic socket?

Post image
2 Upvotes

My lamp accidentally toppled the other day and the socket broke. Can I remove this plastic socket and find a new one at home improvement store?


r/LampRestoration • • 7d ago

Stained-glass chandelier from Morocco — advice on safe restoration, wiring, and identifying its age before I decide what to do with it ( confused )

Thumbnail
gallery
15 Upvotes

Hello everyone,

I have a stained-glass chandelier in Morocco that I believe may be old or unusual, and I would appreciate advice before I decide whether to restore, preserve, or sell it.

I am not claiming it is a Tiffany, Art Nouveau, Art Deco, or any particular maker’s piece without proof. I would simply like help understanding what I have and what restoration work may be appropriate.

What I know:

- Location: Morocco

- Material: stained glass and metal

- Condition: look the pictures and video cleaning / has cracked glass / needs rewiring / few missing parts

My questions:

  1. Based on the construction and materials, does this look like an older original piece, a later reproduction, or something else?
  2. Are there any visible clues that could help identify the maker, country of origin, or period?
  3. What restoration work would be appropriate, and what should I avoid doing so I do not reduce its value?
  4. Is the wiring safe to inspect or replace, and are there particular safety concerns with older chandeliers?
  5. If any glass panels are cracked or missing, is it better to repair them with matching glass or preserve the piece as found?
  6. What additional photos or details would help you give a more useful assessment?

r/LampRestoration • • 7d ago

What lampshade am I supposed to get for this type of lamp?

Thumbnail gallery
2 Upvotes

r/LampRestoration • • 7d ago

Lamp’s arm broken

Thumbnail gallery
1 Upvotes