r/LeverGuns • • 13h ago

Pure silver 350gr 45-70 Werewolf round

259 Upvotes

Not sure if this is appropriate for the sub but I am making a set of these pure silver 45-70 rounds for my Henry Big Game. Laser engraved St. Benedict medal on the casing. This is the prototype so it’s not currently crimped in place, I’ll be casting 8 bullets tomorrow morning and loading them once polished up!


r/LeverGuns • • 1h ago

With my Rossi R95 shorty. Second deer I’ve taken with this rifle, absolutely awesome woods gun

Post image
13 Upvotes

r/LeverGuns • • 7h ago

First “Real” Lever

Thumbnail gallery
21 Upvotes

I finally got around to getting a “real” lever. I bought a HenryX .22lr. I love the gun but I wanted more. I saw all of the amazing builds people on here were doing. So I got a S&W 1854 Stealth Hunter.357/.38. Took it out yesterday and shot very well. So far I have got a MagPul angled grip and a thumb shelf. I have a suppressor on the way. I am still debating on what type of scope I should get. I’m open to suggestions.


r/LeverGuns • • 2h ago

After 13yrs...

Post image
7 Upvotes

Ponied up and mounted an old 1.75-4.5x scope on my .44 mag. Talley single piece rings for the Henry Big Boy, from Tractor Supply Company of all places.

The scope came off a 1917 Enfield, and the only adjustments needed were leveling and about 8 MOA of Elevation at 50yds.


r/LeverGuns • • 18h ago

The ol' winchester 94

Post image
100 Upvotes

r/LeverGuns • • 26m ago

Wanted to see what people think about the Gforce arms Lvr 410

Thumbnail gallery
2 Upvotes

r/LeverGuns • • 1d ago

Another .45-70 or…

Thumbnail gallery
118 Upvotes

I already have a Henry H10 Protector .45-70 that is an absolute blast to carry, shoot, and hunt with. It’s light, short, and I plan to never put a scope on it. I’ve been eyeing the H10 Explorer in bronze because of the threaded barrel, how much I love my Protector, and it’s just a sexy rifle. I plan to put a scope and suppressor on that for a sweet build. Should I get it in .45-70? .44? .357? I prefer a straight-walled shell. I plan to hunt with it and have fun.

Is a suppressor going to do much on a .45-70??


r/LeverGuns • • 1d ago

Slow Morning

Thumbnail gallery
123 Upvotes

Marlin 1895 45-70 w/ Vortex Crossfire II OPMOD


r/LeverGuns • • 1d ago

My home state of Idaho made the 1873 Winchester its state gun, so naturally I drove back to shoot a deer with it.

Post image
70 Upvotes

Not a 44-40 or an original Winchester, but I thought it would be fun to try and use my Miroku made one in 357 this year since the voters here picked the 1873 as the state gun.

I hadn’t hunted with open sights since my first year hunting and I was using my grandpa’s 94. Naturally I missed a small buck at about 110 yards at dusk the night before.

Hoping Montana gets on the state gun fad and picks something with a bit more oomph like a sharps 45-70. That way I can have an excuse get out on an elk hunt with one.


r/LeverGuns • • 21h ago

Need Help deciding what caliber

17 Upvotes

I got it in my head that I want a lever action. In my head I want to build it out cowboy tactical. M-LOK hand guard, red dot, flashlight, just kind of a tactical gun with some wood accents.

I was originally thinking 357 so it would be fun to shoot at the range. But I asked a few friends that have significantly more guns what they had theirs chambered in and they both have it chambered in 45-70. they pointed out I could use it to go boar hunting with.

So I am torn between just having a fun gun to take to the range/ truck gun with the 357. Or having a gun I can take hunting with the 45-70 or 30-30.

At this point I don't have my own hunting rifle I have to barrow my dads.


r/LeverGuns • • 6h ago

In search of a Marlin 336 SBL

1 Upvotes

Can’t see to find one in stock anywhere online or Gunbroker. Anyone have leads on FFLs who have one?


r/LeverGuns • • 15h ago

Henry 45-70 malfunction

Thumbnail gallery
4 Upvotes

Hello all I bought this lever gun about 2 years ago and never really shot it much thought id try deer hunting. When I was unloading it I couldn't chamber the last round the tip gets stuck in the magazine tube. When I unload i just cycle the action till all the rounds are out but it seems like every time on the last round it gets jammed any thoughts?


r/LeverGuns • • 23h ago

Went with direct mount Talley low mount rings…

Post image
13 Upvotes

I took all of your advice and went with much lower rings, and thanks to those of you who pointed me towards Talley direct mount rings.

This is much better!

(Previous post https://www.reddit.com/r/LeverGuns/s/vKXm4estrZ)


r/LeverGuns • • 12h ago

Rossi 45-70 Accuracy with Leverevolution Ammo

0 Upvotes

On two occasions I've seen extremely poor accuracy with 325gr Leverevolution out of my Rossi 45-70.

Dinner plates at 100 yards.

I've got the 18 inch Stainless R95 and I can easilly shoot sub one inch with S&B 405gr. So I know there is potential.

Chat says that the relatively fast twist rate (1 in 12 inches), the long jump to the lands (due to shorter case and spitzer bullet), and the hot loading is a perfect storm for this kind of destabilisation.

Also, I think my chamber tolerance is a bit generous.

Any similar experiences?


r/LeverGuns • • 1d ago

Little throwback this gun season

Post image
24 Upvotes

Pendersoli 1873 Sharps 45/70


r/LeverGuns • • 1d ago

She's done

Post image
77 Upvotes

My new Truck gun.

Build:

Marlin 1894 Dark

Stock: RPP

Rpp and Hoptic Quiver

Emissary Handbrake Mini

Holosun AEMS

YHM R9 Suppressor.

My only two thoughts I might do:

  1. Switch the AEMS to an LPVO (1-4X)
  2. Maybe add a light

Thoughts?


r/LeverGuns • • 1d ago

Battle of the truck Guns

Post image
92 Upvotes

Recently I’ve swapped my AR out for my 45-70 in the truck. I know the AR is probably the more practical choice but there is something about my Marlin that makes me want to take it every where.


r/LeverGuns • • 1d ago

Gap

Post image
2 Upvotes

Is the gap between the magpul handguard and the barre, l near the FRONT, normal ? It looks less spaced near the back ...this is on a Marlin trapper 357 magpul elg


r/LeverGuns • • 1d ago

First lever gun

7 Upvotes

Just got my license approved (AUS) so looking to get my first rifle. Pretty set on a Winchester 94 30-30, keen on the traditional aesthetic with open sights and all (so not worried about mounting an optic or else I would’ve been potentially looking at a marlin). It’ll mainly be for shooting pigs and the occasional wild dog within 150-200 max. Looking for any input/advice as I’m well aware I’m probably looking at this one-eyed.

Cheers 👍


r/LeverGuns • • 2d ago

Henry Supreme - LASR - LPVO - Integrally Suppressed

Thumbnail gallery
96 Upvotes

I'm new to the hobby and don't have many gun friends yet, so wanted to share my first build here. This is a Lever Action Supreme, chambered in 300 Blackout, with an integral suppressed barrel and an LPVO with the illuminated reticle. Super quiet and soft shooting. Plan to do a lot of plinking at 100 yards or so. Love this thing.

Hope everyone has a great day.


r/LeverGuns • • 1d ago

45-70 barrel length

1 Upvotes

how much does it matter trying to decide between 16.17" and 19.1" barrel marlin model 1895. hunting whitetail mostly and some black bears and rare moose under 125yds


r/LeverGuns • • 1d ago

Help picking

4 Upvotes

I’m getting a 45-70, I’ll be using it for timber hunting elk in Washington. I want a 18-20” threaded barrel. Try to stay under 1300 bucks. I was looking at the Henry X, Marlin guide gun, and the marlin trapper model. I don’t really want to go for any of the smith and wessons due to being so new in the game. I’d like to stick to the main two brands. Is there any models I’m missing? Or insight on one vs the other? Thanks guys!


r/LeverGuns • • 2d ago

Is this a good price for a Henry supreme? Or should I wait a week for Black Friday?

Post image
12 Upvotes

r/LeverGuns • • 2d ago

Marlin Barrel Band or End Cap Grip version?

Thumbnail gallery
5 Upvotes

I ordered a Ranger Point Precision kit for what I thought was a straight-butt stock and end
-cap foregrip Marlin.

The grip they have sent looks nothing like their Marlin grips as the hole is in the wrong place. Looking on their website it looks like it’s for a Rossi 92.

Note my magazine tube has been removed to fit the grip (and is out of shot), and the “barrel band” in the photo is actually the band that goes around barrel and magazine tube near the muzzle on an 1980s era Marlin.

Their customer support say I actually have a barrel band Marlin… do I, despite there being a grip on the end cap?


r/LeverGuns • • 2d ago

50yds with 44 mag. Henry Big Boy

Post image
148 Upvotes